Important Safety Instruction

Press gaming controller buttons with a light touch, keeping your hands and fingers relaxed 

Take a 15-minute break during each hour of play 

Stop using the system immediately if you begin to feel tired or if you experience discomfort or pain in your hands or arms while operating the wireless controller.  

Unplug the Stylus Scan before cleaning. Clean with a damp cloth only. Do not use cleaning fluid or detergents on the Stylus Scan.

Do not place the Stylus Scan on an unstable surface, or near a radiator or heat source.

Do not block or cover the openings in the Stylus Scan's cabinet.

Do not insert objects through the slots. Do not spill liquid on the Stylus Scan.

Press the touchpad gently with your finger. Do not press force or operate with your nails.

Do not operate by a sharp edge thing such as a ball point pen, sharp pencil, stylus pen and so on/

Condensation inside the panel due to abrupt changes in temperature or humidity may cause performance to deteriorate

Only use a dry, soft cloth to clean the touchpad. Do not use liquid or chemical cleansers.

Use only a dry, soft cloth to clean the LCD screen. Do not use liquid or chemical cleansers.

If the LCD screen is damaged, contact Epson.

 If the liquid crystal solution gets on your hands, wash them thoroughly with soap and water. If the liquid crystal solution gets into your eyes, flush them immediately with water. If discomfort or vision problems remain after a thorough flushing, see a doctor immediately.

Do not press too hard on the LCD screen or subject it to heavy impacts.

Do not use a pointy or sharp object, such as a pen or your fingernail, to operate the LCD screen.

The LCD screen may contain a few small bright or dark spots, and may display uneven brightness. These are normal and do not indicate that the screen is damaged in any way.

Avoid standing in front of the projector so the bright light does not shine into your eyes.

 Do not place the projector on an unstable cart, stand, or table. 

Do not operate the projector on its side, or while tilted to one side. 

Do not tilt the projector more than 30° forward or back. 

Be Aware Of Toxic Fumes From Materials.

Avoid Electric Shocks.

Watch Out For Scraper Blades.

Avoid Pinch-Point Injuries From Moving Parts.

Watch Out For Burn Risks From Heated Parts.

Adhere To Standard Safety Guidelines.

Minimise Risk Of Fire.