1. Third rank from VTU for M.Tech,

2. JSS PratibhaPrashasti by SJCE, Mysore

Condition Monitoring

Control engineering 

Vibrations and signature analysis

Non-Destructive Testing 

1. A paper entitled “Wear monitoring of uncoated carbide insert using vibration signal processing during turning of En9” is published in International Journal for Advanced Manufacturing Systems, vol. 3, Number 1, January - June 2012, pp. 45-56.

2. A paper entitled “Prediction of tool wear during turning of EN9 work material against coated carbide insert using vibration signal processing”, is published in the International Journal on Research in Engineering and Technology (IJRET), ISSN: 2319-1163(Online), ISSN: 2321-7308(Print), Volume 3, Issue 1, Jan 2014, pp. 564 – 570.

3. A paper entitled “ Production of biodiesel from Simarouba Seeds and Performance Test on Single Cylinder Compression Ignition Engine with Variable Injection Pressure”,  is published in the International Journal of Engineering & Technical Research (IJETR), ISSN:2321-0869, pp.319 – 324,Volume 03, Issue 05, May 2015

4. A paper entitled “ Tool Life Estimate during Turning of EN24 against Uncoated Carbide Insert using Vibration Signal”,  is published in the Indian Journal of Scientific Research (IJSR), ISSN: 0976-2876 (Print), ISSN: 2250-0138 (Online), Volume 12, Issue 01, November 2015.

5. A paper entitled “Performance And Emission Characteristics of Single Cylinder CI Engine using Fish Oil as a Bio Diesel with varying Injection Pressure”, is published in International Journal for Scientific Research and Development, (IJSRD), ISSN: 2321-0613, Column 3, Issue 11, Jan-2016, pp.220-224.

6. A paper entitled”“Tool Life Estimate During Turning Of EN24 Against Coated Carbide Insert Using Vibration Signal”, is published in International Journal on Emerging Technologies (IJET): 7(2), pp. 133-142, (2016).

7. A paper entitled “Performance Analysis of Biodiesel Blends of Surahonne and Dairy Scum Waste on I.C Engine”, is published in International Journal of Emerging Technologies in Engineering Research (IJETER), ISSN: 2454-6410, Volume 6, Issue 2, February 2018, pp. 1-5.

8. A paper entitled “Development of an ANN model for prediction of tool wear in turning EN9 and EN24 steel alloy”, is published in International Journal Advances in Mechanical Engineering, Volume 13(6), 27th April 2021, pp. 1-14, DOI: 10.1177/16878140211026720

1.  A paper entitled “Condition monitoring of single point cutting tool using vibration monitoring technique” at international conference ‘RSC-2004’, organized by CIT, Coimbatore jointly with Massachusetts University, January 2004.

2.  A paper entitled “Prediction of tool wear during turning of EN9 work material against coated carbide insert using vibration signal processing”, at National conference on Recent Innovation in Engineering and Technology, NCRIET-2014 during 3rd and 4th of May,2014, BKIT, Bhalki, Bidar

3.  A paper entitles “Tool Life Estimate during Turning of En24 against Coated Carbide Insert using Vibration Signal” at International conference on Emerging Trends in Mechanical Engineering ICETIME-2015, on 26th March, 2015, organized by Royal College of Engineering, Thrissur,

4.  A paper entitled “ Tool Life Estimate during Turning of EN24 against Uncoated Carbide Insert using Vibration Signal”,at National conference on Recent Innovation in Engineering and Technology, NCRIET-2015 during 7th and 8th of November, 2015, BKIT, Bhalki, Bidar

5.  A paper entitled “ Production of biodiesel from Simarouba Seeds and Performance Test on Single Cylinder Compression Ignition Engine with Variable Injection Pressure”,  was published in the National Conference on Recent Trends in Mechanical Engineering NATCON-15 on 21st May, 2015 at Ghousia College of Engineering, Ramanagaram

6.  A paper entitled”Tool Life Estimate During Turning Of En24 Against Coated Carbide Insert Using Vibration Signal”, at International Conference on Recent Innovations in Engineering and Techology, ICRIET – 2016 during 11th and 13th Nov, 2016, BKIT, Bhalki, Bidar