Embedded Files
3D Printing
When we say approved, we mean they've been approved by the doctors who will be using them! Make4Covid's Design and Clinical Needs teams have been working around the clock to make sure everyone has access to the best designs and the safest procedures so you can print safely and confidently!
Find a design that fits your printer's bed size
Make sure you have the suggested materials
Download the file
Please check the Make4Covid site frequently for approved designs and changes. We are using feedback from makers, hospitals, safety experts, to constantly improve the designs.
Due to print quality issues, please...
Don't print RC3 with PLA (use PETG)
Don't print RC2 with PETG
Prusa Headbands
Prusa Headbands
M4C Visor attachment
M4C Visor attachment
Face Mask Buckle v1
Face Mask Buckle v1
Prusa Headband Stack
Prusa Headband Stack
RC3 Stack
RC3 Stack
Bed Size: Minimum 200mm x 150mm
Nozzle Diameter: Only 0.4 mm at this time
Preferred Materials: PETG/ABS/NYLON
Unacceptable Materials: PLA (use RC2 PLA file)
These files are specifically for use with PrusaSlicer, and are configured for the following printers:
Prusa
Creality
Artillery
If you would like to use these files on a machine not listed above please consult with the 3D Printing Help team located here --> (https://make4covid.mn.co/groups/2085684/)
*Larger Stack files on the way!!
RC3 Stack
RC3 Stack
Bed Size: Minimum 200mm x 150mm
Nozzle Diameter: Only 0.4 mm at this time
Preferred Materials: PETG/ABS/NYLON
Unacceptable Materials: PLA (use RC2 PLA file)
RC2 Stack
RC2 Stack
Bed Size: Minimum 200mm x 150mm
Nozzle Diameter: Only 0.4 mm at this time
Preferred Materials: PLA
Unacceptable Materials: PETG
Page updated
Report abuse