實驗室負責人: 吳玉娟 (Yu-Chuan Wu) 教授
聯絡地址 : 10608台北市忠孝東路三段一號 台北科技大學材料及資源工程系
辦公室: 材資館501-1
實驗室: 材資館203
聯絡電話 : (公) 02-27712171-2765
傳真號碼: 02-27317185
E-MAIL : wuyc@ntut.edu.tw
Yu-Chuan Wu Ph.D.
Professor
Department of Materials and Mineral Resources Engineering
National Taipei University of Technology.
1, Sec. 3, Zhongxiao E. Rd., Taipei 10608 Taiwan, R.O.C.
TEL : (O) +886-2-27712171-2765
FAX: +886-2-27317185
E-MAIL : wuyc@ntut.edu.tw
主要學歷 (Education)
畢/肄業學校 國別 主修學門 學位 起訖年月
國立中山大學 臺灣 材料科學研究所 博士 2000年9月~2004年7月
逢甲大學 臺灣 材料科學與工程系 學士 1995年9月~1999年7月
2000~2004 Ph. D, Institute of Materials Science and Engineering, National Sun Yat-Sen University, Koashiung, Taiwan.
1994~1999 Bachelor, Department of Materials Science and Engineering, Feng-Chia University, Taichung, Taiwan
現職及與專長相關之經歷 (Experience)
服務機構 服務部門/系所 職稱 起訖年月
國立臺北科技大學 材料及資源工程系 主任兼所長 2025年3月~
國立臺北科技大學 材料及資源工程系 教授 2015年2月~
國立臺北科技大學 教務處 教學資源中心主任 2014年8月~2016年1月
國立臺北科技大學 材料及資源工程系 副教授 2009年2月~2015年2月
國立臺北科技大學 材料及資源工程系 助理教授 2005年8月~2009年2月
國立中山大學 材料科學研究所 博士後研究員 2004年8月~2005年8月
2025/3~ Chair, Department of Materials and Mineral Resources Engineering, National Taipei University of Technology.
2015~ Professor, Department of Materials and Mineral Resources Engineering, National Taipei University of Technology.
2014~2016 Director, Teaching and Learning Center, National Taipei University of Technology.
2009~2015 Associate Professor, Department of Materials and Mineral Resources Engineering, National Taipei University of Technology.
2005~2009 Assistant Professor, Department of Materials and Mineral Resources Engineering, National Taipei University of Technology.
2004~2005 Post Dr., Institute of Materials Science and Engineering, National Sun Yat-Sen University.
擔任國家教育研究院-材料科學名詞審議會委員,2022/1/30~2026/1/29。
2. 擔任經濟部標準局陶業國家標準技術委員會委員,2013/7/1~2023/6/30,2023/7/1~2025/6/30。
3. 擔任台灣陶瓷學會第十三屆、第十四屆、第十五屆、第十六屆和第十七屆理事[任期2016/7/1至2026/5/9],第十六屆陶瓷委員會副主任委員[2022/9/2~2024/9/1]。
4. 擔任國防部國防先進技術研究技術審議組委員,2021/5/1~2023/4/30,2023/5/1~2025/4/30。
5. 擔任國家科學及技術委員會工程技術研究發展處材料工程學門複審委員,2021/1/1~2023/12/31。
6. 擔任第三十三屆~第三十九屆中國材料學會出版委員會,2014/1/1~2025/12/31。
1. Served as a member of the Materials Science Terminology Review Committee of the National Academy of Education Research, 2022/1/30~2026/1/29.
2. Served as a member of the Ceramic Industry National Standards Technical Committee of the Bureau of Standards of the Ministry of Economic Affairs, 2013/7/1~2025/6/30.
3. Served as the director of the 13th, 14th, 15th, 16th and 17th sessions of the Taiwan Ceramic Society, 2016/7/1~2026/5/9.
4. Served as a member of the Ministry of National Defense-National Defense Advanced Technology Research and Technology Review Group, 2021/5/1~2023/4/30, 2023/5/1~2025/4/30.
5. Served as a review committee member of the Material and Engineering, Department of the Engineering and Technologies, the National Science and Technology Council, 2021/1/1~2023/12/31.
6. Served as a Publications Committee of the Materials Research Society-Taiwan (MRS-T), 2014/1/1~2025/12/31.
研究專長 (Research Interests)
1. 陶瓷材料微觀結構分析及晶體缺陷分析(電子顯微鏡分析) (Analysis of microstructures and crystallographic defects in ceramics. (by using TEM))
2. 陶瓷燒結製程(Processing and sintering of ceramics)
3. 材料分析(Material analysis)
4. 固態氧化物燃料電池材料開發(Material development in solid oxide fuel cell)
5. 交流阻抗電化學分析(AC impedance electrochemical analysis)
6. 陶瓷材料室溫至高溫的電性分析(Electrical analysis of ceramic materials from room temperature to high temperature)
7. 介電陶瓷材料製備及分析(Preparation and analysis of dielectric ceramic materials)
8. 高溫電容介電材料合成及製備(Synthesis and preparation of high temperature capacitor dielectric materials
9. 多層陶瓷電容微觀結構分析(Analysis of the microstructure of multilayer ceramic capacitors)
主要研究方向 (Research Topics)
1. 陶瓷結構分析/陶瓷相變及缺陷結構研究(Structure, phase transformation and defect formation in ceramics)
2. 固態氧化物燃料電池研究(Solid oxide fuel cell)
3. 穿透式電子顯微鏡應用(Application of transmission electron microscopy)
4. 介電陶瓷材料(Dielectric ceramic materials);contains X8R and X9R capacitor
研究方向 (Research Direction)
集中於探討陶瓷材料之電子及機械等物理特性和微觀結構特性並尋求其製程之最佳化。
Focus on the physical and microscopic properties of ceramics such as electronics and machinery and seek to optimize their processes.
1. 陶瓷材料燒結製程研發,建立微觀結構,製程參數和電子機械特性之關聯性。
The research of ceramic material sintering process and establishes the correlation between microstructure, process parameters and electro-mechanical properties.
2. 利用電子顯微鏡分析不同材料微觀結構及缺陷,晶體晶向關係,材料相變化,尋求其與製程之關聯。
Electron microscopy was used to analyze the microstructure and defects of different materials, crystal orientation, material phase transformation, and seek to correlate with the process.
3. 陶瓷材料應用及特性分析,尤其將集中於電子陶瓷及其電性測定。
Ceramic material applications and characterization, especially focusing on electronic ceramics and their electrical measurements.
4. 固態氧化物燃料電池材料開發及製程改良
Development and process improvement of material in the solid oxide fuel cells
5. 介電陶瓷材料開發及製程改良
Development and process improvement of dielectric ceramic materials
參與舉辦國際研討會
1. 擔任2019年國際薄膜研討會(TACT 2019 International Thin Films Conference)籌備委員,台北科技大學,台北,2019/11/17 ~ 2019/11/20。(台灣鍍膜科技協會、台北科技大學主辦)
2. 擔任2019年第一屆亞太鑛冶國際研討會(APMM)之學術籌備委員,成功大學,台南,2019/11/17 ~ 2019/11/20。
3. 擔任2021年國際薄膜研討會(TACT 2021 International Thin Films Conference)籌備委員,台北科技大學,台北,2021/11/15 ~ 2021/11/18。(台灣鍍膜科技協會、台北科技大學主辦)
4. 擔任2021年第七屆前瞻能源陶瓷材料與永續能源低碳社會應用科技國際研討會(ACTSEA 2021 7th International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications toward a Low Carbon Society)籌備委員,台北科技大學,台北,2021/11/15 ~ 2021/11/17。(台灣陶瓷學會、台北科技大學主辦)
5. 擔任2022年第十七屆氫能工程國際研討會(HYPOTHESIS XVII 2022 Hydrogen Power Theoretical & Engineering Solutions International Symposium)籌備委員,台北科技大學,台北,2022/9/26 ~ 2022/9/29。(台灣氫能與燃料電池學會、台北科技大學主辦)
6. 擔任2023年國際薄膜研討會(TACT 2023 International Thin Films Conference)籌備委員,台北科技大學,台北,2023/11/12 ~ 2023/11/15。(台灣鍍膜科技協會、台北科技大學主辦)
7. 擔任2024年第八屆前瞻陶瓷材料與永續能源低碳社會應用科技國際研討會(ACTSEA 2024 8th International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications toward a Low Carbon Society)籌備委員,台北科技大學,台北,2024/5/9 ~ 2024/5/11。(台灣陶瓷學會、台北科技大學主辦)
8. 擔任2025年國際薄膜研討會(TACT 2025 International Thin Films Conference)籌備委員,台北科技大學,台北,2025/10/26 ~ 2025/10/29。(台灣鍍膜科技協會、台北科技大學主辦)