What I learned from this project is it take time and patience to make it work and run somewhat smoothly. How I developed as a Engineer, Physicist and Designer is that I was able to make a robot without using idea's online.

What I did for assignment 6 was I used 3 markers instead of one. Then for the weight I cut the glue stick in half and instead of putting it in the middle, I put it more too the left. I let my thing run and it drew dots in a circle

For the straight lines, I didn't really change anything, I noticed that my robot can draw in a circle and a straight lines depending on how fast the motor is going.

So what I did for Assignment 4-5 was I asked Ms Rivera for help with the wiring and after a while I was able to make my robot move without having my hands on it too much.

So far it moves a little but not that much. I need to find a way to make the foam sheet not fly off. But when it did move, it made like a C shape mark. Definitely need more improvement.

My design is inspired by something I enjoy doing.

What I'm going to do is get a empty yogurt cup, put the markers on the side, tape them, put the motor with the battery and probably mess around with the design.

Paper Roll

Xacto Knife

Tape

Motor

Brush

Empty Water bottle

Glue Gun and glue sticks

Makers