Aircraft observations of black carbon over the Yellow Sea and Seoul Metropolitan Area: Vertical profiles and air mass origin influence, JOURNAL OF ENVIRONMENTAL SCIENCES, 166, pp. 633~647, 2026
Nano liquid particle monitoring system for colloidal nanoparticle measurement: reducing non-volatile residue via virtual impactor with large-droplet removal, MEASUREMENT SCIENCE AND TECHNOLOGY, 37(23), pp. 235003, 2026
Ambient synthesis of La embedded ZIF-8 core-shell adsorbent for selective fluoride removal from Tanzanian geothermal water: performance, kinetics, and isotherm, JOURNAL OF ENVIRONMENTAL CHEMICAL ENGINEERING, 14(2), pp. 121765, 2026
Interfacial synergism of cobalt phthalocyanine modulated Ni3V2O8-NrGO self-assemblies as effective and durable electrocatalyst for overall water splitting, APPLIED SURFACE SCIENCE ADVANCES, 32, pp. 100954, 2026
Liquid particle monitoring system utilizing aerosol metrology and data processing algorithm: chemical mechanical polishing slurry application, MEASUREMENT, 259, pp. 119624, 2026
Linking structure and filtration performance in electrospun polyethersulfone filters: The role of deposition uniformity and configuration, BUILDING AND ENVIRONMENT, 284, pp. 113467, 2025
Physicochemical characterization of submicron particles using advanced drone-based systems: real-time measurements and single-particle analysis via SERS in a case study from South Korea, SCIENCE OF THE TOTAL ENVIRONMENT, 980, pp. 179570, 2025
A drone-based rotating cascade impactor for single-particle analysis: Advancing aerosol mixing state research, ATMOSPHERIC RESEARCH, 325, pp. 108259, 2025
Development of evaporation-driven energy harvesting device applying electrospun nanofiber mat with carbon black powders, JOURNAL OF THE JAPAN SOCIETY OF POWDER AND POWDER METALLURGY, 72, pp. S1601~S1604, 2025
An integrated drone-based platform with novel correction methods for accurate vertical profiling of black carbon, ATMOSPHERIC ENVIRONMENT, 349, pp. 121147, 2025
Facile fabrication of hierarchical porous electrospun poly (L-lactic acid) fiber membrane via swelling-crystallization for oil adsorption, JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY, 151, pp. 431~439, 2025
Investigation of vertical profiles of particulate matter and meteorological variables up to 2.5 km in altitude using a drone-based monitoring system, ATMOSPHERE, 16, pp. 93, 2025
A new paradigm on waste-to-energy applying hydrovoltaic energy harvesting technology to face masks, POLYMERS, 16, pp. 2515, 2024
Evaporation-driven energy generation using an electrospun polyacrylonitrile nanofiber mat with different support substrates, POLYMERS, 16, pp. 1180, 2024
Semi-empirical equation for determining the pressure drop of nanofibers, SEPARATION AND PURIFICATION TECHNOLOGY, 324, pp. 124585, 2023
Development of a two-column particle sizer (TC-PS) for simultaneous measurements of particle concentration and size distribution, AEROSOL SCIENCE AND TECHNOLOGY, 57, pp. 903~910, 2023
Development of drone-based filter sampling system for carbonaceous aerosol analysis using thermal-optical transmittance method, AEROSOL SCIENCE AND TECHNOLOGY, 57, pp. 861~871, 2023
Accurate measurements of particle emissions from a three-dimensional printer using a chamber test with a mixer-installed sampling system, SCIENTIFIC REPORTS, 13, pp. 6495, 2023
Development of a detection system for gas-phase aromatics and other molecules ionizable by soft X-rays demonstrated using methyl salicylate, AEROSOL SCIENCE AND TECHNOLOGY, 57, pp. 619~632, 2023
Modeling pressure drop values across ultra-thin nanofiber filters with various ranges of filtration parameters under an aerodynamic slip effect, SCIENTIFIC REPORTS, 13, pp. 5449, 2023
Numerical study of nanoparticle penetration characteristics in forked tubes using tracking particle identification, POWDER TECHNOLOGY, 415, pp. 118172, 2023
A new evaluation method of three different low-cost dust sensors using exponentially decaying particle concentrations, ENVIRONMENTAL ENGINEERING RESEARCH, 27, pp. 200501, 2022
Hydrothermal synthesis of CuO@MnO2 on nitrogen-doped multiwalled carbon nanotube composite electrodes for supercapacitor applications, SCIENTIFIC REPORTS, 12, pp. 12951, 2022
Estimate of the critical exposure time based on 70 confirmed COVID-19 cases, JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 79, pp. 492~498, 2021
Application of an aerosol electrical mobility spectrum analyzer: Charged-particle polarity ratio measurement in the Antarctic and Arctic regions, JOURNAL OF ENVIRONMENTAL SCIENCES, 105, pp. 81~89, 2021
Ultrasonication-mediated nitrogen-doped multiwalled carbon nanotubes involving carboxy methylcellulose composite for solid-state supercapacitor applications, SCIENTIFIC REPORTS, 11, 2021
Numerical investigation of nanoparticle deposition location and pattern on a sharp-bent tube wall, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 164, 2021
Effects of exponentially decaying and growing concentrations on particle size distribution from a scanning mobility particle sizer, AEROSOL SCIENCE AND TECHNOLOGY, 54, pp. 1135~1143, 2020
Experimental study of nanoparticle transport and penetration efficiency on a sharp-bent tube (elbow connection), INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, 155, 2020
Effects of filter structure, flow velocity, particle concentration and fouling on the retention efficiency of ultrafiltration for sub-20 nm gold nanoparticles, SEPARATION AND PURIFICATION TECHNOLOGY, 241, 2020
Development of a new nanoparticle sizer equipped with a 12-channel multi-port differential mobility analyzer and multi-condensation particle counters, ATMOSPHERIC MEASUREMENT TECHNIQUES, 13, pp. 1551~1562, 2020
Development of a toroidal-shaped differential mobility analyzer for effective measurements of airborne particles: Experiment and modeling, AEROSOL SCIENCE AND TECHNOLOGY, 54, pp. 367~380, 2020
Numerical simulation of a multi-port differential mobility analyzer (MP-DMA) used in a real-time nano-particle sizer (NPS), POWDER TECHNOLOGY, 362, pp. 135~144, 2020
Extensive evaluation and classification of low-cost dust sensors in laboratory using a newly developed test method, INDOOR AIR, 30, pp. 137~146, 2020
Nanofiber Filter Performance Improvement: Nanofiber Layer Uniformity and Branched Nanofiber, AEROSOL AND AIR QUALITY RESEARCH, 20, pp. 80~88, 2020
Characterization of colloidal nanoparticles in mixtures with polydisperse and multimodal size distributions using a particle tracking analysis and electrospray-scanning mobility particle sizer, POWDER TECHNOLOGY, 355, pp. 18~25, 2019
Modeling transport of colloidal particles through polydisperse fibrous membrane filters under unfavorable chemical and physical conditions, POWDER TECHNOLOGY, 355, pp. 7~17, 2019
Influence of colloidal particles with bimodal size distributions on retention and pressure drop in ultrafiltration membranes, SEPARATION AND PURIFICATION TECHNOLOGY, 222, pp. 352~360, 2019
Predicting collision efficiencies of colloidal nanoparticles in single spherical and fibrous collectors using an individual particle tracking method, SEPARATION AND PURIFICATION TECHNOLOGY, 222, pp. 202~213, 2019
Deposition and reentrainment of colloidal particles in disordered fibrous filters under chemically and physically unfavorable conditions, JOURNAL OF MEMBRANE SCIENCE, 582, pp. 322~334, 2019
Modeling of fibrous filter media for ultrafine particle filtration, SEPARATION AND PURIFICATION TECHNOLOGY, 209, pp. 461~469, 2019
Retention mechanisms of 1.7 nm ZnS quantum dots and sub-20 nm Au nanoparticles in ultrafiltration membranes, JOURNAL OF MEMBRANE SCIENCE, 567, pp. 58~67, 2018
The effect of filtered nanoparticles on gas filtration efficiency of granular activated carbons, CARBON, 121, pp. 63~71, 2017
Evaluation of concentration measurement techniques of colloidal nanoparticles for microfiltration and ultrafiltration applications: Inductively coupled plasma-mass spectrometry, nanoparticle tracking analysis and electrospray-scannirig mobility particle sizer, SEPARATION AND PURIFICATION TECHNOLOGY, 184, pp. 34~42, 2017
Liquid filtration of nanoparticles through track-etched membrane filters under unfavorable and different ionic strength conditions: Experiments and modeling, JOURNAL OF MEMBRANE SCIENCE, 524, pp. 682~690, 2017
Cyclone performance on removing fibrous particles generated from terry-towels and cotton clothes, POWDER TECHNOLOGY, 262, pp. 36~41, 2014
Particle Deposition Velocity Onto EUVL Masks in Vertical Airflow, IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 27, pp. 417~421, 2014
Effect of a Horizontal Inlet on the Collection Efficiency of a Rectangular-Slit-Nozzle Impactor, AEROSOL SCIENCE AND TECHNOLOGY, 48, pp. 649~654, 2014
Effect of an Orifice on Collection Efficiency and Wall Loss of a Slit Virtual Impactor, AEROSOL SCIENCE AND TECHNOLOGY, 48, pp. 121~127, 2014
Deposition of Charged Particles on a Flat Plate in Parallel Flow in the Presence of an Electric Field, IEEE TRANSACTIONS ON SEMICONDUCTOR MANUFACTURING, 27, pp. 287~293, 2014
Deposition velocity of particles in charge equilibrium onto a flat plate in parallel airflow under the influence of simultaneous electrophoresis and thermophoresis, JOURNAL OF AEROSOL SCIENCE, 67, pp. 166~176, 2014
Particle deposition on face-up flat plates in parallel airflow under the combined influences of thermophoresis and electrophoresis, JOURNAL OF THE KOREAN PHYSICAL SOCIETY, 61, pp. 1028~1036, 2012
The effects of simultaneous electrophoresis and thermophoresis on particulate contamination of an inverted EUVL photomask surface in parallel airflow, EUROPEAN PHYSICAL JOURNAL PLUS, 127, 2012