LabJack은 아날로그 및 디지털 입/출력을 제공하는 USB, 이더넷 및 WiFi 기반 측정 및 자동화 장치를 공급합니다.
최대 유연성을 갖기 위해 T7 시리즈를 선택하십시오. T7 시리즈는 16 비트에서 24 비트 아날로그 입력, USB, 이더넷 또는 WiFi를 사용하는 옵션과 다양한 내장 펌웨어 기능을 통해 거의 모든 데이터 수집 요구를 수행 할 수 있습니다.모
거의 모든 종류의 센서에서 신호를 수집하는 데 적합하며 3 가지 통신 인터페이스를 통해 센서 데이터를 처리 할 수 있습니다. 측정 및 계측, 증폭 입력을 위해 소프트웨어 선택 가능한 게인을 설정할 수 있습니다. 수십 개의 디지털 I / O 기능 및 Modbus TCP를 갖춘 T7 시리즈는 다기능 DAQ 플랫폼입니다.
일반적으로 실험실 연구, 산업 제어 및 모니터링, 자동화 된 테스트 및 프로토 타입 개발에 제품이 활용될 수 있습니다. 또한 T7 시리즈 디바이스는 Lua 스크립트를 실행하여 독립형 운영이 가능합니다.
하드웨어 개요
Analog Input
14 Analog Inputs built in (16-24 Bits Depending on Speed & Device Type)
Expand to 84 analog inputs with Mux80 add-on
T7: 16-bit high-speed ADC (up to 100k samples/s)
T7-Pro: 24-bit low-speed ADC (resolution as low as 1uV noise-free)
Software Configurable Resolution Settings
Single-Ended Inputs (14) or Differential Inputs (7)
Analog input ranges: ±10V, ±1V, ±0.1V and ±0.01V
All analog input features are software programmable by configuring the Analog Input Registers
High speed sampling configurable by using Stream Mode. Speeds up to 100kS/s
Low Latency Sampling and Control (less than 1ms) is made easy with Command-ResponseModbus messages
Easy integration with sensors like thermocouples, load cells, bridges, and more ...
2 analog outputs (12-bit, 0-5V)
Waveform generation via Stream Out
Integrated LJTick-DAC support for multiple +/-10V outputs
23 Digital I/O
Supports SPI, I2C, and more... (Master Only)
5 PWM Outputs with individual phase control
5 Pulse Outputs with configurable number, frequency, and width
2 Frequency Inputs returning both frequency and period
2 Pulse Width Inputs measuring time spent high and low as well as duty cycle
2 Line-to-Line Inputs measuring the time between edges on 2 different lines
4 High-Speed Counters
6 Software Counters with debounce capabilities
3 Pairs of Quadrature Inputs
Many of these DIO Extended Features share pins and cannot be used at the same time. See the DIO Extended Features section of the T7's datasheet
200 µA
10 µA
USB
Ethernet
802.11b/g WiFi (T7-Pro only)
Other Highlights
Capable of stand-alone operation by running Lua Scripts
Built-In CJC Temperature Sensor for easy thermocouple temperature readings
Field Upgradable Firmware
Programmable Startup Defaults
Industrial temperature range (-40 to +85C)
For more information please visit the hardware overview section of the T7's datasheet
Further Reading
More technical specifications about the T7 can be found in Appendix A of the T7's Datasheet.
제품 구분
T7-Pro vs. T7
The T7-Pro has the following additional features:
802.11b/g WiFi connectivity.
Low-Speed and High-Resolution (24-bit) sigma-delta ADC.
Battery Backed RTC for stand-alone data logging.
Factory Installed microSD card for stand-alone data logging.
OEM Versions
T7 및 T7-Pro는 표준 및 OEM 버전으로 제공됩니다. OEM 버전은 다른 장치에 포함될 수 있도록 설계되었습니다. 커넥터와 인클로저가 제외된 PCB 형태로 공급됩니다.
기타 사항
각 구매 품목마다 장기간의 보증 서비스를 제공합니다.
제조사에서 운영하는 포럼에 가입하여 각종 기술정보를 얻을 수 있습니다.
Free applications to configure, test, and log data to file
Free examples: C/C++, C#, Delphi, Java, LabVIEW, MATLAB, Python, VB.NET and more...*
Modbus TCP – Use any platform that supports TCP/IP, no driver required
The free, cross-platform LabJack LJM Library – Extends/wraps the Modbus protocol for convenience
Expansion boards and accessories – Add ±10V DACs, 4-20 mA inputs, terminal boards, relay boards and more...
일부 예제는 윈도우 전용으로 제공됩니다.
Package Contents (Non-OEM)
T7 (-Pro) unit itself in red enclosure
USB cable (6 ft / 1.8 m)
Ethernet Cable (6ft / 1.8m)
USB 5V power supply
Screwdriver
Antenna (T7-Pro only)
Other package details: No software CD included. Download the software from labjack.com.
Retail packing (Package) size: 10" x 7" x 3"
Retail packing (Package) wt: 1.2lb
악세서리