Embedded Files
Based on your feedback, we designed iMX6 TinyRex module the way, that you will be able to buy not only powerful, but also cost effective option. It’s going to be manufactured by VOIPAC and here are the prices. I hope you will like them
For more information, go to VOIPAC webshop or check detailed Pricelist >
Brief overview of iMX6 Tine Rex module pricing
Lite Module BASIC Module PRO Module MAX Module
CPU iMX6 SOLO, 1GHz, 1 core iMX6 SOLO, 1GHz, 1 core iMX6 DUAL, 1GHz, 2 cores iMX6 QUAD, 1GHz, 4 cores
Memory 256MB, DDR3-800 512MB, DDR3-800 1GB, DDR3-1066 2GB, DDR3-1066
Ethernet NO YES YES YES
Price EUR (1pcs) 89€ 102€ 115€ 129€
Price EUR (1000pcs) 59€ 71€ 82€ 99€
All the modules also include: User LED, power LED, 3x 100pins board to board connector and 0°C to +70°C commercial temperature range. As usual, custom builds will be available. Contact VOIPAC directly >
Posted on July 7, 2015 by Robert Feranec
We made couple of power measurements. These are just to give you an idea of iMX6 TinyRex power consumption.
More results will come when we have the complete software support, e.g. these tests don’t include running HDMI input or GPU.
iMX6 TinyRex SOLO module (during booting, the maximum 3W)
Description Vin [V] Iin [A] Pin [W]
Uboot only 4.99 0.31 1.55
Uboot + ETH 4.97 0.39 1.94
Maximum during booting 4.97 0.6 2.98
Linux idle 4.96 0.33 1.64
Linux + ETH 4.96 0.42 2.08
Stressapptest 1 thread CPU, 1 memory 4.94 0.56 2.77
iMX6 TinyRex QUAD module (during booting, the maximum 5W)
Description Vin [V] Iin [A] Pin [W]
Uboot only 4.96 0.34 1.69
Uboot + ETH 4.95 0.42 2.08
Maximum during booting 4.95 1 4.95
Linux idle 4.43 0.38 1.68
Linux + ETH 4.94 0.46 2.27
Linux + ETH + full HD HDMI – X windows 4.93 0.54 2.66
Stressapptest 4 thread CPU, 4 memory 4.89 0.97 4.74
*Notes:
Vin = Input voltage
Iin = Input current
Pin = Vin * Iin
Posted on July 1, 2015 by Robert Feranec
Preparing setup for running tests in Environmental chamber.
Posted on June 5, 2015 by Robert Feranec
For last 9 months we were working really hard Based on your comments, we developed a new module, which is half size of the standard iMX6 Rex and has almost all the iMX6 pins available on the board to board connectors, including camera interfaces. PDF schematic of the iMX6 TinyRex module will be available, but the module is not going to be open source.
If you need to power up the iMX6 Rex module from a single 5V power input, follow these steps: iMX6_Rex-5V_power_supply_modifications.pdf. The instructions also include iMX6 Rex Baseboard modification.
iMX6_Rex-5V_power_supply_modifications.pdfWe working on a new iMX6 fully open source project – including commercial use. Contribute to a new awesome project by answering couple of questions. You are helping to build new generation of Raspberry Pi or Arduino! Thank you!
Posted on December 12, 2014 by Robert Feranec
VOIPAC ported Android on the iMX6 Rex. If you would like to try the VOIPAC binaries, here you will find step-by-step instructions: How to test Android on iMX6 Rex
Fantastic job Marek! Thank you :)
To give you a better idea about how the iMX6 Rex module + Baseboard will look in a box, I 3D printed one. Here is the result …
In case you need to generate your own fresh & new filesystem, follow the instruction at How to create a filesystem. It’s a fantastic help, just few steps and you have it ready.
Thank you very much to Sam Nazarko. Sam created the script for you guys. Check out also Sam’s project called VERO (Recommended).
Page updated
Report abuse