YOCTO for iMX6 Rex

As Freescale is doing iMX6 support through YOCTO, we will be adding iMX6 Rex into YOCTO.

If you need to use YOCTO for your own project, follow these pages. It may help you:

• How to start with YOCTO

• How to add support of custom board into YOCTO

Here are our first results. New iMX6 Rex u-Boot with ethernet working:

U-Boot 2014.01 (Nov 21 2014 - 06:03:04)

CPU: Freescale i.MX6Q rev1.2 at 792 MHz

Reset cause: WDOG

Board: iMX6 Rex

DRAM: 1 GiB

MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2

*** Warning - bad CRC, using default environment

No panel detected: default to Hannstar-XGA

Display: Hannstar-XGA (1024x768)

In: serial

Out: serial

Err: serial

Net: FEC [PRIME]

Hit any key to stop autoboot: 0

=> ping 192.168.0.1

Using FEC device

host 192.168.0.1 is alive

=>