Publications

Publications in Year 2023

1. Comparative Study of Surface Integrity for AZ31B Magnesium Alloy during the Application of Ultrasonic Vibration and Laser Energies in the Turning Process

N Deswal, R Kant ,Journal of Materials Engineering and Performance, 1-19

2. Effect of Compressed Air Cooling on Tool Wear During Ultrasonic-Vibration-Laser Assisted Turning of Aluminium Alloy

N Deswal, R Kant,Journal of Vibration Engineering & Technologies, 1-18

3. Experimental study on laser bending of mild steel with buckling mechanism

R Yadav, R Yadav, R Kant,Optics & Laser Technology 167, 10980

4. Machinability and surface integrity analysis of magnesium AZ31B alloy during laser assisted turning

N Deswal, R Kant,Journal of Manufacturing Processes 101, 527-545

5. Sustainable Material, Design, and Process

R Kant, H Gurung, S Yadav,CRC Press

6. Industry 4.0: Concepts, Processes and Systems

R Kant, H Gurung,10.1201/9781003246466

7. Smart sensors and actuators in Industry 4.0

H Gurung, R Kant, Industry 4.0: Concepts, Processes and Systems, 25-60

8. Introduction to Additive Manufacturing: Concepts, Challenges, and Future Scope

S Rathor, R Kant, E Singla,Industry 4.0: Concepts, Processes and Systems, 192-217

9. Enhancing the bend angle and mechanical properties of mild steel using fiber laser bending technique under the influence of electromagnetic force

YP Sharma, BS Sidhu, R Kant, R Yadav,Optics and Lasers in Engineering 168, 107631

10. Robotic tool-path generation for complex and overhang-angled parts through offline programming

S Rathor, S Kumar, E Singla, R Kant, CK Nirala,Proceedings of the 2023 6th International Conference on Advances in Robotics …

11. Robotic Path Planning for direct slicing method to Minimize Support Structure in Fused Filament Fabrication Process

S Sharma, E Singla, R Kant,Proceedings of the 2023 6th International Conference on Advances in Robotics 

12. Laser transmission welding of polycarbonate sheets using electrolytic iron powder absorber

DK Goyal, R Yadav, R Kant,Optics & Laser Technology 161, 109165

13. Influence of Substrate Roughness and Ceramic Content on Deposition Characteristics of Cold-Sprayed Ti/TiO2 Deposits

A Kumar, H Singh, R Kant,Metals and Materials International 29 (6), 1669-1683

14. Comparative Corrosion Behaviour of Cold Sprayed Titanium/Hydroxyapatite and Titanium/Baghdadite Composite Coatings in Simulated Body Fluid Environment

A Kumar, T Chand, R Kant, H Singh,ITSC 2023, 487-494

15. Improving Bend Angle by Using Forced Cooling when Laser Bending Al Sheet

R Yadav, R Kant,Lasers in Engineering 55 (1-2), 75-85

16. How Different Coating Conditions Affect Temperature and Bend Angle when Laser Bending Mild Steel Sheet

R Yadav, DK Goyal, R Kant,Lasers in Engineering 55 (1-2), 103-115

17. Radial direction ultrasonic-vibration and laser assisted turning of Al3003 alloy

N Deswal, R Kant,Materials Research Express 10 (4), 044004

18. Effectiveness of forced cooling during laser bending of duplex-2205

R Yadav, R Kant,Materials and Manufacturing Processes 38 (5), 598-607

19. Hybrid turning process by interacting ultrasonic vibration and laser energies

N Deswal, R Kant,Materials and Manufacturing Processes 38 (5), 570-576

20. The synergistic influence of lemon extract on the physio-chemical properties of Kibisu silk reinforced wheat gluten biocomposite

P Bhowmik, R Kant, R Nair, H Singh,Polymer Bulletin 80 (4), 4371-4386

21. Mechanism of bonding during laser transmission welding using EIP absorber

DK Goyal, R Kant,Materials and Manufacturing Processes 38 (4), 485-493

22. Effect of degumming duration on the behavior of waste filature silk-reinforced wheat gluten composite for sustainable applications

P Bhowmik, R Kant, H Singh,ACS omega 8 (7), 6268-6278

23. Preface

R Kant, CK Nirala,Lasers in Engineering 55 (1-2), 1-2

Publications in Year 2022

1. An integrated hybrid methodology for estimation of absorptivity and interface temperature in laser transmission welding

R Kant, R Yadav, DK Goyal

2. Multi-scan laser bending of duplex stainless steel under different cooling condition.

R Yadav, DK Goyal, R Kant,CIRP Journal of Manufacturing Science and Technology 39, 345-358

3. An Experimental Study of Forced Cooling in Single-Scan Laser Bending

R Yadav, DK Goyal, R Kant,Advances in Forming, Machining and Automation: Select Proceedings of AIMTDR …

4. A Study on Ultrasonic Vibration and Laser-Assisted Turning of Aluminum Alloy

N Deswal, R Kant,Advances in Forming, Machining and Automation: Select Proceedings of AIMTDR …

5. Microstructural and tribological properties of laser-treated cold-sprayed titanium/baghdadite deposits

A Kumar, R Kant, H Singh,Journal of Materials Research

6. Enhancing process competency by forced cooling in laser bending process

R Yadav, DK Goyal, R Kant,Journal of thermal stresses

7. Enhancing Corrosion Performance of Cold-Sprayed Titanium/Baghdadite (Ti/BAG) Bio-Composite Coatings via Laser Treatmen

A Kumar, DK Goyal, R Kant, H Singh,Coatings 12 (7), 1010

8. Synergistic effect of ultrasonic vibration and laser energy during hybrid turning operation in magnesium alloy

N Deswal, R Kant,The International Journal of Advanced Manufacturing Technology 121 (1), 857-876

9. An integrated hybrid methodology for estimation of absorptivity and interface temperature in laser transmission welding

DK Goyal, R Yadav, R Kant,The International Journal of Advanced Manufacturing Technology 121 (5), 3771 …

10. A comprehensive study on the effect of line energy during laser bending of duplex stainless steel

R Yadav, DK Goyal, R Kant,Optics and Laser Technology 151, 108025

11. Machinability analysis during laser assisted turning of aluminium 3003 alloy

N Deswal, R Kant,Lasers in Manufacturing and Materials Processing 9 (1), 56-71

12. Preface

R Kant,Lasers in Engineering 53 (3-4), 137-138

13. Laser-assisted Turning of Aluminium 3003 Alloy

N Deswal, R Kant,Lasers in Engineering 53 (3-4), 197-214

14. Study of Temperature Field Considering Gradient Volumetric Heat Absorption in Transparent Sheet During Laser Transmission Welding (LTW)

DK Goyal, R Yadav, R Kant,Lasers in Engineering 53 (3-4), 215-229

15. Experimentally Validated Analytical Modelling of the Laser Bending of Low Carbon Steel Sheets

R Nair, R Kant, R Yadav, H Gurung,Lasers in Engineering 53 (3-4), 253-265

16. FE analysis of Ultrasonic vibration assisted turning of magnesium AZ31B alloy

N Deswal, R Kant,Materials Today: Proceedings 62, 7473-7479

17. Experimental investigation on magnesium AZ31B alloy during ultrasonic vibration assisted turning process

N Deswal, R Kant,Materials and Manufacturing Processes, DOI: 10.1080/10426914.2022.2039701

18. Advanced Finishing Processes for Biomedical Applications

TS Bedi, R Kant, H Gurung,Advanced Micro-and Nano-manufacturing Technologies: Applications in …

Publications in Year 2021

1. Development of cold sprayed titanium/baghdadite composite coating for bio-implant applications

A Kumar, H Singh, R Kant, N Rasool,Journal of Thermal Spray Technology 30 (8), 2099-2116

2. Tribological behavior of cold-sprayed titanium/baghdadite composite coatings in dry and simulated body fluid environments

A Kumar, R Kant, H Singh,Surface and Coatings Technology 425, 127727

3. Effect of surface modification on mechanical properties of filature silk waste and nanoclay filler-based polymer matrix composite

R Nair, A Bhattacharya, P Bhowmik, R Kant,Polymers and Polymer Composites 29 (9_suppl), S696-S706

4. Development and Analysis of Laser-assisted Bending with Moving Pre-displacement Load.

R Kant, H Gurung, U Sarma, SN Joshi,Lasers in Engineering (Old City Publishing) 49\

5. Influence of natural crosslinker and fibre weightage on waste kibisu fibre reinforced wheatgluten biocomposite

P Bhowmik, R Kant, R Nair, H Singh,Journal of Polymer Research 28, 1-14

6. Special Issue Advancements and Futuristic Trends in Mechanical and Materials Engineering (AFTMME 2019) Preface

R Kant,LASERS IN ENGINEERING 49 (1-3), 1-2

7. Comparative performance of magnetorheological external finishing tools using different magnetic structures

TS Bedi, R Kant,Materials Today: Proceedings 41, 908-91

8. Influence of injection and holding pressure on tribological and mechanical behavior of injection moulded thermoplastic

R Yadav, A Pancharya, R Kant,Materials Today: Proceedings 41, 915-920

Publications before Year 2021

A numerical investigation into the effect of forced convection cooling on the performance of multi-scan laser bending process

R Kant, SN Joshi,Application of Lasers in Manufacturing: Select Papers from AIMTDR 2016, 21-43

Optimization of laser-assisted joining through an integrated experimental-simulation approach

F Lambiase, S Genna, R Kant,The International Journal of Advanced Manufacturing Technology 97, 2655-2666

Numerical investigations into influence of scanning path curvature on deformation behavior during curvilinear laser bending of magnesium sheets

R Kant, SN Joshi,Journal of Thermal Stresses 41 (3), 313-330

Experimental studies on curvilinear laser bending of thin sheets

R Kant, PM Bhuyan, SN Joshi,Techno-Societal 2016: Proceedings of the International Conference on …

Simulations for design and manufacturing

US Dixit, R Kant,Singapore: Springer

A procedure for calibration and validation of FE modelling of laser-assisted metal to polymer direct joining

F Lambiase, S Genna, R Kant,Optics & Laser Technology 98, 363-372

Analyses of significant features of l-Prolinium Picrate single crystal: an excellent material for non linear optical applications

V Jayaramakrishnan, MS Jayalakshmy, R Kant, M Vij, N Vijayan, ...

A study on straightening of bent Aluminium 5052 sheets using laser line heating

S Garg, R Kant, SN Joshi, US Dixit,Proceedings of 6th International & 27th All India Manufacturing Technology …

Numerical and Experimental Studies on the Laser Bending of Magnesium M1A Alloy.

R Kant, SN Joshi Lasers in Engineering (Old City Publishing) 35

Thermo-mechanical studies on bending mechanism, bend angle and edge effect during multi-scan laser bending of magnesium M1A alloy sheets

R Kant, SN Joshi,Journal of Manufacturing Processes 23, 135-148

Assessment of Feasibility, Productivity and Product Quality during Laser Based Bending of Magnesium Alloy Sheets

R Kant,Indian Institute of Technology Guwahati

Research issues in the laser sheet bending process

R Kant, SN Joshi, US Dixit,Materials Forming and Machining, 73-97

An integrated FEM-ANN model for laser bending process with inverse estimation of absorptivity

R Kant, SN Joshi, US Dixit,Mechanics of advanced materials and modern processes 1, 1-12

Experimental studies on TGM and BM dominated curvilinear laser bending of aluminum alloy sheets

R Kant, PM Bhuyan, SN Joshi,Lasers Based Manufacturing: 5th International and 26th All India …

Laser forming systems: a review

US Dixit, SN Joshi, R Kant,International Journal of Mechatronics and Manufacturing Systems 8 (3-4), 160-205

Experimental investigation on laser bending of metal sheets using parabolic irradiations

PM Bhuyan, R Kant, SN Joshi,International & 26th All India Manufacturing Technology, Design and Research …

Numerical modeling and experimental validation of curvilinear laser bending of magnesium alloy sheets

R Kant, SN Joshi,Proceedings of the Institution of Mechanical Engineers, Part B: Journal of …

State of the art and experimental investigation on edge effect in laser bending process

R Kant, S Joshi, U Dixit,Proceedings of the national conference NCRAME, 8-9

Numerical simulation of multi-pass laser bending processes using finite element method

R Kant, S Joshi,Proceeding of 2nd International Conference on IRAM, 16-18

Finite element simulation of multi-pass laser bending process with forced cooling

R Kant, SN Joshi,Proceedings of the 8th international conference COPEN 2013, 13-15

Finite element simulation of laser assisted bending with moving mechanical load

R Kant, SN Joshi,International journal of mechatronics and manufacturing systems 6 (4), 351-366

Experimental Studies on Laser Bending of Magnesium M1A Alloy Sheet

R Kant, SN Joshi, US Dixit,National Conference on Manufacturing: Vision for Future, MVF-2013

Numerical simulation of laser bending of magnesium alloy AZ31B using FEM

R Kant, SN Joshi,Proceedings of international deep drawing research group, 736-746

In-plane testing behavior of adhesive-bonded steel sheets: influence of sheet surface roughness, adhesive thickness, and bonding width

R Kant, RG Narayanan,Journal of Testing and Evaluation 40 (2), 292-301

Thermo-mechanical analysis of curvilinear laser bending of magnesium alloy sheet using finite element method

R Kant, SN Joshi,Proceedings of the 4th International & 25th National AIMTDR 2012 Conference …

Analysis of sheet-holding methods in laser bending process using FEM

R Kant, SN Joshi,Proceedings of The 3rd Asian Symposium on Materials & Processing, ASMP-2012

Analysis of Sheet-holding Methods in Laser Bending Process

R Kant, SN Joshi,3rd Asian Symposium on Materials & Processing

Sound health and silk waste

R Kant,ASIAN TEXTILE JOURNAL-BOMBAY- 11 (7), 61-62

Investigation on Importance of Absorptivity during Laser Bending Process

R Kant, AP Sunny, H Gurung,Governing 4, 5

Finite Element Analysis of Laser Bending Process

R Kant¹, SN Joshi, US Dixit

Investigation on the forming of adhesive bonded blanks

R Kant, RG Narayanan