(Under FRIA Award)
She received the BE degree in Instrumentation and Control Engineering from Savitribai Phule Pune University, Pune, India, in 2018, M.Tech degree in Electronics and Communication Engineering from J. K. Institute of Applied Physics & Technology, University of Allahabad, Uttar Pradesh, India, in 2020, and PhD degree from Indian Institute of Technology, Ropar, India in 2025. Her research interests include radio frequency (RF), antenna design for Internet of Things (IoT) applications, Bluetooth Low Energy (BLE), and IoT networks.
He received the B.Tech Degree in Electronics & Communication Engineering with minors in Mathematics from Shiv Nadar University in 2016. He received the M.Tech Degree in Electronics & Communication Engineering from IIIT Delhi in 2019. Previously he worked on circularly polarized Fabry Perot cavity antennas in M.Tech Thesis. He also published a conference paper on the same in IEEE International Radar Conference in June 2020. He also designed rectangular and circular patch antennas on wood in his B.Tech project. His current research interest is in Designing Antenna for 5G and IoT applications.
He received his BE degree in electronics and communication from Madhav institute of technology and science Gwalior (MITS) in 2019 and received M.Tech in signal processing and communication (SPCOM) from Indian institute of technology Ropar. His area of interest is in the field of antenna design for 5G and Currently working on the implementation of chip less tag for 5G using biodegradable material
She received her Btech degree from Shri Mata Vaishno Devi University Katra in 2018 and did her MTech from National Institute of Technology Jalandhar in 2022. She has also worked with ZF group as an Application Software Engineer for a brief period. She has earlier worked in the areas of Image processing and Design of Active Devices at high frequency. She is currently working towards PhD on the topic of next generation communication systems with reconfigurable intelligent surface design and implementation.
(Funded from DST-SERB Project)
He received his Bachelor of Technology degree in electronics and communication engineering from The L.N.M. Institute of Information Technology, Jaipur, India, in 2014, and his Master of Technology degree in electronics and communication engineering from the National Institute of Technology, Jalandhar, Punjab, India, in 2018. He is pursuing a Ph.D. in Electrical Engineering with I.I.T. Ropar, India. His research interests include Antenna Design for RFEH and WPT and ITS Solutions.
He received his B.Tech. in electronics and communication engineering from H.N.B. Garhwal University (A Central University), Uttarakhand in 2020. He completed his M.E. in electronics and communication engineering from the National Institute of Technical Teachers Training and Research, Chandigarh, in 2022. He has a six months teaching experience at Chandigarh University, Mohali, Punjab. He also worked at I.I.T. Patna as a project fellow for a brief period. His area of interest is mmWave antenna designs for I.S.M. Band applications, meta-structure, and meta-antenna design using additive manufacturing techniques.
(Funded from ARDB-DRDO Project)
He received his B.Tech degree in Electronics and Communication Engineering from the University Institute of Engineering and Technology, Panjab University, in 2022. He completed his M.Tech in Electronics and Communication Engineering from the National Institute of Technology, Hamirpur, in 2024. He worked as an Embedded Software Engineer Intern at iHub-AWaDH from 2021 to 2022 and also has good knowledge in device modeling of 2D material-based FETs and MATLAB tools. Now, as a PhD student in Electrical Engineering at the Indian Institute of Technology Ropar, his areas of interest include designing multibeam antenna arrays for UAVs.
(Visvesvaraya PhD Scholar)
He received his BE degree in Electronics Engineering from Madhav Institute of Technology and Science (MITS), Gwalior, in 2020. He also holds a Post Graduate Diploma in Computer Applications from Makhanlal Chaturvedi National University, completed in 2021. He completed his ME in Communication Systems from Jabalpur Engineering College (JEC), Jabalpur, in 2023. He has interned with Sagar Smart City, focusing on UI/UX design, and conducted research on antenna arrays during a research internship at IIT Patna. His research includes the design and analysis of microstrip patch antenna arrays for sub-6 GHz 5G applications. He has also undergone vocational training at BHEL Bhopal, BSNL Sagar, and West Central Railway Jabalpur. His current research interests include advanced antenna design, next-generation communication systems, and integrating AI-driven algorithms for 5G and beyond.
(International PhD Scholar)
He received his M.Tech degree in Communication, Networking, and Signal Processing (CNSP) under the Department of Electronics and Communication Engineering from IIT Roorkee. As part of his M.Tech project, he implemented a hardware prototype of a Cell-Free System using SDR, which won the Best Demo Award at the 2024 Research Scholars Day. He completed his B.Tech in Electronics and Telecommunications Engineering at East West University, Bangladesh. His current research interests include Advanced Antenna Design for Next-generation Communication Systems and IoT Applications.
(Funded from DoT 6G Project)
He completed his B.Tech in Automobile Engineering from Noida International University in 2020, followed by an M.Tech in Artificial Intelligence and Machine Learning (AI/ML) from the Indian Institute of Technology Hyderabad (IIT Hyderabad) in 2023. As part of his M.Tech thesis, he developed an Unmanned Ground Vehicle (UGV) for Surveillance and Reconnaissance with a strong emphasis on defence applications. Since 2023, he has continued this work under the Entrepreneur-in-Residence (EiR) program funded by TiHAN IIT Hyderabad, focusing on advancing the project towards real-world deployment. His research interests include Artificial Intelligence, Machine Learning, Deep Learning, and Robotics, with a particular focus on their applications in defence and autonomous systems
(Co-supervisor: Dr. Santosh K. Vipparthi)
He received his Diploma in Electrical Engineering from the Government Polytechnic College, Amritsar, in 2017, and his B.Tech in Electrical Engineering from Guru Nanak Dev Engineering College, Ludhiana, in 2020. He completed industrial automation training at Siemens and subsequently worked as an Automation Engineer in 2021. From 2021 to 2024, he served as a Junior Research Fellow (JRF) at ICAR-CIPHET, Ludhiana, where he contributed to various automation projects in post-harvest technology in collaboration with Punjab Agricultural University (PAU), Ludhiana. In July 2025, he joined the Department of Electrical Engineering at the Indian Institute of Technology Ropar as a PhD student. His research focuses on AI/ML-based design and optimization of antennas.
(Registered in sAIDE, Co-supervisor: Dr. Santosh K. Vipparthi)
He received his B.Sc. in Electronic Science from the University of Delhi in 2020. He completed his M.Sc. in Informatics from the University of Delhi in 2022. He obtained his M.Tech. in Computer Science & Technology from Jawaharlal Nehru University, New Delhi, in 2024, where he carried out his dissertation work titled “Robust Deep Learning Model for Classification of Motor Imagery Tasks.” He is currently pursuing his Ph.D. in sAIDE, IIT Ropar (since July 2025). His research interests include Deep Learning and Machine Learning.
(Supervisor: Dr. Santosh K. Vipparthi)
She received her Bachelor of Technology degree in Electronics and Telecommunication Engineering from Shri Guru Gobind Singhji Institute of Engineering and Technology, Nanded, Maharashtra, India, in May 2025. She joined the Department of Electrical Engineering at the Indian Institute of Technology Ropar as a full-time Ph.D. student in July 2025. Her research interests include communication systems and machine learning techniques for next-generation 6G networks.
He received his Bachelors degree (Hons.) in Electronics and Communication Engineering from Himachal Pradesh University (HPU), Shimla in 2009 and a Master's degree in Electronics and Communication Engineering from Panjab University (PU), Chandigarh in 2017. Currently, he is a faculty in the Department of Technical Education, Himachal Pradesh since 2013. His current research interests include full-duplex antennas, flexible wearable antennas, low-profile antennas, and Electromagnetic Bandgap (EBG)/Artificial Magnetic Conductor (AMC) design.
BTech in Electronics and communications from TKM College of Engineering (APJ Abdul Kalam Technological University),Kerala. Currently MTech in Signal processing and communications, IIT Ropar. Master thesis Project work under: ARISE ML: ML driven 6G AR optimization for Advanced Self sustainable IoT devices.
She completed her B.E. in Electronics and Telecommunication from Savitribai Phule Pune University, Pune, Maharashtra in 2023. She is currently pursuing her M.Tech in Signal Processing and Communication (SPCOM) at the Indian Institute of Technology (IIT) Ropar. Her M.Tech thesis project, ARISE ML: ML-driven 6G AR Optimization for Advanced Self-Sustainable IoT Devices, primarily involves work on the localization of batteryless IoT nodes as part of the broader 6G initiative under the ARISE ML project.
Thesis Title:- Quality-aware synthesis of antenna systems for simultaneous wireless information and power transfer in IoT applications
Defended on: 20 Jan 2025
Post-PhD position: Assistant Professor, IIIT DM Kancheepuram
Thesis Title:- Misalignment Insensitive Wireless Power Transfer System for Powering Implanted Biomedical Devices
Defended on: 16 july 2024
Post-PhD position: Postdoc Fellow at IIT Bombay
Current Position: Senior wireless power engineer, Dolby Laboratory India Pvt. Ltd..
Thesis Title:- Mitigation of Lateral Misalignment Problem in Wireless Power Transfer Applications
Defended on: 2 August 2023
Post-PhD position: Senior Antenna Engineer at NuCurrent Company
Current Position: Faculty at BITS Pilani, Dubai Campus.
Thesis Title:- Performance Enhancement of Wireless Power Transfer Rectenna System for IoT Applications
Defended on: 11 May 2023
Post-PhD position: Post-Doc at the University of Alberta, Canada
Current Position: Post-Doc at the University of Glasgow, United Kingdom
Shobit Agarwal | Jan 2019-Oct 2019 | Placement: PhD from University of Bologna, Italy |
Ajey Kumar Rajak | 2025 | Thesis:- Joint Sensing and Communication With 6G Through AI/Ml For Vehicle-to-Vehicle Localization
Prajjval Bharadwaj | 2024 | Thesis:- Desing of Circular Polarized Integrated Rectenna
Vikas Deshmukh | 2024 | Thesis:- To Optimize vRAN with FlexRAN framework and Networking (JMT with Intel)
Dharuv Dass | 2023 | Thesis:- Reconfigurable Multi-beam Antenna for UAV Applications | Joined DRDO as scientist
Ankit Singh | 2023 | JMT: VIP Enhancements and Debugging For Embedded Multi Media Card (eMMC) | Joined Synopsis
Suraj Kumar Gupta | 2021 |Thesis:- Chip less tag for super high frequencies| Joined to pursue PhD at AMR Lab IIT Ropar
Pratyush Verma | 2021 |Thesis:- UHF RFID passive tag 3D localization using machine learning | Joined to pursue PhD from IIT Ropar
Ajay Kumar | 2021 |Thesis:- Detection of antenna device by backscattering| Joined K12 techno services
Ashutosh Prajapati | 2020 | Thesis:- Interference-aware Antenna Synthesis for Intelligent Transportation System used in Next Generation Electronic Toll Collection | Joined TCS Innovation Lab| Joined University of Oulu Finland for PhD.
Harshit Rana and Rudra Chourasia | 2025 | Capstone Project: Development of a large Reconfigurable Intelligent Surface
Harshit| 2025 | Capstone Project: Implementing Subcarrier Amplitude Modulation in OFDM
Ramavath Jayaprakash| 2025 | Capstone Project: Design and simulation of a 2x2 microstrip patch antenna array
Chirag Ghodke| 2025 | Capstone Project: Design and simulation of a 2x2 microstrip patch antenna array
Rajan Singh| 2025 | Capstone Project: Drone localization
Priyanshi Shisodia| 2025 | Capstone Project: Wireless Drone Charging Platform
Sanket Wadhwa| 2025 | Capstone Project: Vibrational Analysis with Dense Sensor Node Networks
Anas Malik and Aryan Singh| 2025 | Capstone Project: Study and Design Replication of AWR2944 EVM ADAS Radar Board
Trinabh Garg and Pushpendra Jain | 2025 | Mid-price forecasting using limit order book data (Co-supervisor: Dr. Puneet Pasricha, Math)
Aman Saini | 2024 | Capstone Project: Design of Reconfigurable Intelligent Surfaces
Pankaj Suthar and Ankita Meena | 2024 | Capstone Project: Design RF to DC Converter for Low Input Power
Ayush Teharpuria, Yash Yadav, Yatin | 2024 | Capstone Project: Simultaneous wireless information and power transfer
Sparsh Verma, Akshit Barnwal, Yash Varshney, Keshav Arora, and Aryan Bansal| 2024 | Capstone Project: Pattern reconfiguration in financial time series data
Ajey Singh Bhadauria| 2022 | Capstone Project: Survey on novel Antenna Designs for Massive MIMO Applications and their implementation in MATLAB
Sachin Gupta | 2022 | Capstone Project: RFID Tag Antenna Design for Measuring Water Level of a Plastic Bottle
Vishal Singh | 2021 | Project: Wireless Power Transfer
Harnit Singh Sudan | 2020 | Project: Smart Platform for Magnetic Dipole Localisation
Ambarish Borah | 2020 | Project: Smart Platform for Magnetic Dipole Localisation
Arjit Gupta | 2020 | Project: A compact, long-range, flexible UHF RFID tag for liquid bottles
J P Amit | 2019 | Project: Smart surface for wireless charging of smart vehicles
Jitender Kumar | 2019 | Project: Smart surface for wireless charging of smart vehicles
Arpit Sharma | 2019| Project: Analysis of cluster-based wireless sensor networks
Naman Gola | 2019| Project: Analysis of cluster-based wireless sensor networks
DEP projects
Aditya Gupta| 2025 | DEP Project: Solar Powered Satellite-Based Microwave Receiver
Jalpan Upadhyay and Vartika Pant | 2025 | DEP Project: Transmission of Visual Data using USRP
Ragini Gupta and Sumit Bahl| 2025 | DEP Project: Drone Communication Relay System
Sumit Bahl| 2025 | DEP Project: Autonomous Drone Landing on RF Charging Pad using Direction Finding
Navnoor Singh Bal | 2025 | DEP Project: Drone Building, calibration, and control
Tanveer Singh, Pushpendra Jain, Prachi, Divyanshu Sharma | 2025 | DEP Project: Creating a web-based DL platform for medical application (Co-supervisor: Dr. Sukrit Gupta).
Aaryan Yashvardhan Sharma, Kirtdeep Kaur, Rudra Kumar Chourasia, Yash Agarwal | 2024 | DEP Project: Experimental Study of Communication Range Enhancement of Drones
Harshit Rana, Harsh Vardhan Srivastava, Harshit, Devangita Sharma | 2024 | DEP Project: Development of Energy Autonomous IoT Sensor Node
Nikhil Kumar, Priyansh Kashyap, Pulkit Singh, Ritul Anand | 2024 | DEP Project: Development Of Autonomous Drone Wireless Charging Station
Mehul, Chirag, Devansh, Pranav| 2024 | DEP Project: Electricity Bill Management Portal
Ashish, Ankit, Dishant, Keshav| 2023 | DEP Project: Orientation estimation with rectenna array for blind people navigation
Kritika Garg| 2023 | DEP Project: (Co-supervisor: Dr. Shashi Shekhar Jha CSE)
Yash varshney, Sparsh, Keshav, Yash yadav, Akshit | 2023 | DEP Project: (Co-supervisor: Dr. Puneet Goyal CSE)
Navneet Khevandiya, Nitin Rathore, Pankaj, Rohit Dagar, Somesh Sangwan| 2022 | DEP Project: RFID-based Smart parking management system
Neloy Ghosh | 25 May 2024- 15 July 2024 | Design and Development of Autonomous Drone Wireless Charging Platform.
Sanchati Ronak Jain | 1 May 2024- 30 June 2024 | Development and Design of an Autonomous Drone Wireless Charging Platform.
Netsanet Tsegaye Debebe | 22 May 2023- 28 July 2023 | Design of a high frequency rectifier for a wireless power reception using magnetic resonance coupling
Dhruba Jyoti Barua | 22 May 2023- 18 July 2023 | Finding a cost-effective solution for underwater wireless communication
Neel Kumar Gupta | 23 May 2022- 18 July 2022
Shubham Kalra | May 2020-Oct 2020
Aayush Pandey| May 2020- Oct 2020
Raushan Kumar Jha | May 2019- July 2019
Hitesh Sandal | May 2019- July 2019