Journals:

1. Kansara, K., Singh, S., Dwivedi, N.K., Khodachenko, M.L., 'Probing the melting dynamics in a phase change Rayleigh–Bénard system under low gravity conditions', International Journal of Heat and Mass Transfer, 234, 126073, 2024. IF: 5.0

2. Kansara, K., Singh, S., Dwivedi, N.K., Khodachenko, M.L., 'Investigating combined effects of varying gravity and heat flux direction on the melting dynamics of phase change material in space'. Acta Astronautica, 220, pp. 427-448, 2024. IF: 3.1

3. Sharma. A, Abhinand, S, Kothadia H, Singh S. & Mondal B, ‘Experimental analyses of solidification phenomena in an ice-based thermal energy storage system’. Applied Thermal Engineering, 236, pp.121888, 2024. IF: 6.1

4. Singh S., Chaudhary M., Sørensen K.‘Demonstration of real-time monitoring in smart graded-water supply grid: an institutional case study’, AQUA - Water Infrastructure, Ecosystems and Society, 72 (11), pp. 2152–2169, 2023. IF: 4.3

5. Dwivedi, N.K., Singh, S., Khodachenko, M.L., Kislyakova, K.G., Kis, A. Jovian Magnetosheath Turbulence Driven by Whistler. Physica Scripta, 99(4),045028, 2024. IF: 2.6

6. Sharma. A, Kothadia H, Singh S. & Mondal B, ‘Solidification of nanoparticle-based PCM in a fin-aided triplex-tube energy storage system for cooling applications’, Thermal Science and Engineering Progress, 42, pp.101872, 2023. IF: 5.1

7. Sharma. A, Sontakke, S, Kothadia, H and Singh, S, ‘Experimental Analysis of the Influential Factors Upon Mixed Convection Flow in Horizontal Pipes’, ASME Journal of Heat and Mass Transfer, 145 (9), 2023. IF: 2.1

8. Sharma. A, Patel, P, Singh S., Mondal B & Kothadia H, ‘Numerical study of ice freezing process on fin aided thermal energy storage system’.Int. Commun. Heat Mass Transf., 130, pp. 105792, 2022. IF: 6.4

9. Sharma. A, Patel, P, Singh S., Sharma M, Mondal B & Kothadia H.,‘Numerical study of tube diameter effects on solidification of PCM in a compact heat exchanger’, Journal of Enhanced Heat Transfer, 29, 2022. IF: 2.403

10. Sharma. A, Patel, P, Singh S., Sharma M, Mondal B and Kothadia H, ‘A numerical study of refrigerant tube diameter effect on enhancing the phase change process, Journal of Enhanced Heat Transfer, 10.1615/JEnhHeatTransf.2022040453, 2022. IF: 2.403

11. Kumar, K, Singh, S 2021, ‘Investigating thermal stratification under multiple transient operations of hot water storage tank’. Energy Reports, 7(2021), pp. 7186-7199. IF: 4.7

12. Singh, S., Dwivedi, N 2021, ‘Impact of thermal contact resistance on thermal-hydraulic characteristics of double fin-and-tube heat exchanger’, Advances in Fluid and Thermal Engineering, Lecture Notes in Mechanical Engineering, Springer Nature Singapore. pp. 187–197. 

13. Mangla B., Dwivedi N.K., Sharma D.K., Bardhan A., Rajput A., Singh S 2021. Low latitude, topside ionosphere composition and its variation with changeable solar activity, Indian Journal of Radio and Space Physics, Volume 50, Pages 190-197.

14. Singh, S, Sørensen, K, Condra, T, Batz, SS & Kristensen, K 2019, 'Investigation on transient performance of a large-scale packed-bed thermal energy storage' Applied Energy, vol. 239, pp. 1114-1129. https://doi.org/10.1016/j.apenergy. 2019.01.260. IF: 10.1

15. Singh, S, Sørensen, K & Condra, TJ 2019, 'Investigation of Vortex Generator Enhanced Double-Fin and Tube Heat Exchanger' Journal of Heat Transfer, vol. 141, no. 2, 021802, pp. 1-13. https://doi.org/10.1115/1.4042050. IF: 2.1

16. Välikangas, T, Singh, S, Sørensen, K & Condra, TJ 2018, 'Fin-and-tube heat exchanger enhancement with a combined herringbone and vortex generator design' International Journal of Heat and Mass Transfer, vol. 118, pp. 602-616. https://doi.org/10.1016/j.ijheatmasstransfer.2017.11.006. IF: 5

17. Singh, S, Sørensen, K, Simonsen, AS & Condra, TJ 2017, 'Implications of fin profiles on overall performance and weight reduction of a fin and tube heat exchanger' Applied Thermal Engineering, vol. 115, pp. 962–976. https://doi.org/10.1016/j.applthermaleng.2017.01.043. IF: 6.1

18. Dwivedi, NK & Singh, S 2017, 'Inertial range spectrum of field-aligned whistler turbulence' Physica Scripta, vol. 92, 035001. https://doi.org/10.1088/1402-4896/aa5950. IF: 2.6

19. Singh, S, Sørensen, K & Condra, TJ 2017, 'Investigation of material efficient fin patterns for cost-effective operation of fin and tube heat exchanger' Applied Thermal Engineering, vol. 126, pp. 903-914. https://doi.org/10.1016/j.applthermaleng.2017.08.010. IF: 6.1

20. Kyriakidis, F, Sørensen, K, Singh, S & Condra, TJ 2017, 'Modeling and optimization of integrated exhaust gas recirculation and multi-stage waste heat recovery in marine engines' Energy Conversion and Management, vol. 151, pp. 286-295. https://doi.org/10.1016/j.enconman.2017.09.004. IF: 9.9

21. Dwivedi, NK & Singh, S 2017, 'Nonlinear whistler wave model for lion roars in the Earth’s magnetosheath' Astrophysics and Space Science, vol. 362, no. 172. https://doi.org/10.1007/s10509-017-3156-2. IF: 1.8

22. Singh, S, Stechel, EB & Buttry, DA 2017, 'Transient modeling of electrochemically assisted CO2 capture and release' Journal of Electroanalytical Chemistry, vol. 799, pp. 156-166. IF: 4.1

23. Singh, S, Sørensen, K & Condra, TJ 2016, 'Influence of the degree of thermal contact in fin and tube heat exchanger: A numerical analysis' Applied Thermal Engineering, vol. 107, pp. 612-624. IF: 6.1

24. Singh, S & Kumar, S 2014, 'Performance evaluation of solar dryer system for optimal operation: Mathematical modelling and experimental validation' International Journal of Sustainable Energy, vol. 33, no. 1, pp. 141-158. IF: 3.1

25. Singh, S & Kumar, S 2013, 'Solar drying for different test conditions: Proposed framework for estimation of specific energy consumption and CO2 emissions mitigation' Energy, vol. 51, pp. 27-36. IF: 9

26. Singh, S & Kumar, S 2012, 'Comparative Thermal Performance Study of Indirect and Mixed-Mode Solar Dryers' International Journal of Sustainable Energy Development, vol. 1, no. 1/2, pp. 6-13. IF: 13.66

27. Singh, S & Kumar, S 2012, 'Development of convective heat transfer correlations for common designs of solar dryer' Energy Conversion and Management, vol. 64, pp. 403-414. IF: 9.9

28. Singh, S & Kumar, S 2012, 'New approach for thermal testing of solar dryer: Development of generalized drying characteristic curve' Solar Energy, vol. 86, no. 7, pp. 1981-1991. IF: 6

29. Singh, S & Kumar, S 2012, 'Testing method for thermal performance-based rating of various solar dryer designs' Solar Energy, vol. 86, no. 1, pp. 87-98. IF: 6

Conferences:

1. Singh A., Maheshwari A., Singh S. Digital Twin Framework for Leakages Detection in Large-scale Water Distribution Systems: A Case Study of IIT-Jodhpur Campus. International Conference on Advances in control and optimization of dynamical systems (ACODS 2024), (2024) IFAC-PapersOnLine, 57, pp. 292 – 297.

2. Singh, S., Kansara, K., Dwivedi, N.K., Khodachenko, M.L. Accessing the Melting Dynamics of Phase Change Material Under Reduced Gravity Conditions. ASME Fluids Engineering Division Summer Meeting (FEDSM2024), July 15-17, 2024, Anaheim, USA.

3. Kansara, K., Singh, S., Dwivedi, N.K., Khodachenko, M.L. Investigating the Influence of Mutual Orientation Between Heat Flux and Gravity on the Melting Dynamics of Phase Change Material. ASME Fluids Engineering Division Summer Meeting (FEDSM2024), July 15-17, 2024, Anaheim, USA.

4. Sahu, D., Kansara, K., Singh, S. (2024). Influence of Geometric Parameters on Power Generation from a Thermoelectric Module. In: Singh, K.M., Dutta, S., Subudhi, S., Singh, N.K. (eds) Fluid Mechanics and Fluid Power, Volume 6. FMFP 2022. Lecture Notes in Mechanical Engineering. Springer, Singapore. 

5. Kansara, K., Singh, S. (2024). Accommodating Volume Expansion Effects During Solid–Liquid Phase Change—A Comparative Study. In: Singh, K.M., Dutta, S., Subudhi, S., Singh, N.K. (eds) Fluid Mechanics and Fluid Power, Volume 5. FMFP 2022. Lecture Notes in Mechanical Engineering. Springer, Singapore.

6. Chauhan S. and Singh S. Investigation of Hydraulic Response to Leakage Scenarios in Water Distribution Network Using EPANET: Case study of IIT Jodhpur. Roorkee Water Conclave 2024, IIT Roorkee, India

7. Chauhan S. and Singh S. Modeling of Leakage Scenarios in Water Distribution Network using EPANET. International Conference on Water 2024, International Institute of Water, IIW, Jodhpur, India

8. Verma S. and Singh S. Multiphysics Modeling of Thermoelectric Unicouple and Comparison of Electrical Performance with Different Thermoelectric Materials. 2nd International Conference on Thermo-Fluids and System Design (ICTFSD) 2024, 4th -5th April 2024, BIT Mesra, Ranchi, India,

9. Veer, C., Singh, S., Ram, J. (2024). Improvement in Flow Distribution for Effective Thermal Management in Thermoelectric Generator for Waste Heat Recovery. In: Tyagi, R.K., Gupta, P., Das, P., Prakash, R. (eds) Advances in Engineering Materials. FLAME 2022. Lecture Notes in Mechanical Engineering. Springer, Singapore.

10. Sharma, A., Kothadia, H.B., Singh, S. Analysis of Mixed Convection Strength under Laminar and Turbulent Flow. Proceedings of the International Symposium on Turbulence, Heat and Mass Transfer, 2023. 10th International Symposium on Turbulence, Heat and Mass Transfer, (THMT 2023) September 11-15, 2023, Rome, Italy.

11. Singh S. and Rautela J, Numerical study of packed bed thermal energy storage with natural sandstone rock as a filler material, AIP Conf. Proc. 2863 (1), 020008, 2023.

12. T Kulkarni; A Maheshwai; Singh S., Dynamic Model Development for Management of Water Distribution System, 2nd Canadian IWA-Young Water Professional Conference 2023, June 1-3, Vancouver, BC.

13. Kansara K. and Singh S. Effect of Inverting Heat Source Direction on the Melting of Phase Change Material under the Influence of Microgravity Environment. Advances in Fluid and Thermal Engineering. FLAME 2022. Lecture Notes in Mechanical Engineering. Springer, Singapore, pp 95–105, 2023. https://doi.org/10.1007/978-981-99-2382-3_8

14. Kansara K., Veer C. and Singh S., Investigating Pin Fin Configurations on Automotive Exhaust Heat Exchanger Surface for Thermoelectric Generation. Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India, 1875-1880, DOI: 10.1615/IHMTC-2021.2830

15. Sharma. A, Singh S., Mondal B and Kothadia H, Investigating the effects of snowflake-shaped fin configurations on PCM solidification, Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India, pp. 2137-2143. DOI: 10.1615/IHMTC-2021.3230

16. Rai, S, Singh, S, Numerical investigation of turbulent heat transfer enhancement in partially corrugated tube using water based nanofluids, Proceedings of the 26thNational and 4th International ISHMT-ASTFE Heat and Mass Transfer Conference December 17-20, 2021, IIT Madras, Chennai-600036, Tamil Nadu, India, 2625-263. DOI: 10.1615/IHMTC-2021.3970

17. Rai, S, Singh, S, Performance Enhancement of Finned Tube Heat Exchanger using New Vortex Generator, Journal of Physics: Conference Series, Volume 2178, International Symposium on Fluids and Thermal Engineering (FLUTE 2021) 22 July 2021, Uttar Pradesh, India, J. Phys.: Conf. Ser. 2178 012002, 2022. DOI 10.1088/1742-6596/2178/1/012002

18. Sharma. A, Patel, P, Singh S., Sharma M, Mondal B and Kothadia H, Numerical study of tube diameter effects on solidification of PCM in a compact heat exchanger, International Symposium on Fluids and Thermal Engineering (FLUTE – 2021), July 22, 2021, AMITY, India.

19. Kumar, K., Singh, S, Investigating Thermal Stratification in a Hot Water Storage Tank during Charging Mode. FLUTE-2021, Journal of Physics: Conference Series, Volume 2178, International Symposium on Fluids and Thermal Engineering (FLUTE 2021) 22 July 2021, Uttar Pradesh, India J. Phys.: Conf. Ser. 2178 012001, 2022. DOI 10.1088/1742-6596/2178/1/012001

20. Kumar, K., Singh, S, A CFD Investigation of Turbulent Mixing in Horizontal T-joint. Proceedings of the 8th International and 47th National Conference on Fluid Mechanics and Fluid Power (FMFP 2020), December 9-11, 2020, IIT Guwahati, Assam, India.

21. Rai, S., Singh, S, ‘Open-sourced CFD Simulation of Natural Convection in an Enclosure’. Proceedings of the 8th International and 47th National Conference on Fluid Mechanics and Fluid Power (FMFP 2020), December 9-11, 2020, IIT Guwahati, Assam, India.

22. Remiro LC, Singh S., Iov F., ‘Flexible district heating network model that predicts mass flow, pressure and temperature losses’. 5th International Conference on Smart Energy Systems: 4th Generation, 2019.

23. Singh, S and Sørensen, K, Dynamic Performance Analysis of Large-Scale Packed Bed Truncated Conical Thermal Energy Storage, Proceedings of the ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference. Volume 1: Fluid Mechanics, July 28–August 1, 2019, San Francisco, California, USA. https://doi.org/10.1115/AJKFluids2019-5680

24. Singh, S and Sørensen, K, Dynamic model of a heat pump-based house heating system, Proceedings of the 59th SIMS Conference on Simulation and Modelling, SIMS 2018. vol. 153, Linköping University Electronic Press, Linköping Electronic Conference Proceedings, pp. 87-94, 59th SIMS Conference on Simulation and Modelling, September 26, 2018, Oslo, Norway. https://doi.org/10.3384/ecp1815387

25. Singh, S, Sørensen, K, Bojesen, C and Nielsen, MP, Physical modelling of heat pump for simultaneous space heating and hot water demand. in H Lund (ed.), 4th International Conference on Smart Energy Systems and 4th Generation District Heating. Aalborg University, pp. 302-303, 4th International Conference on Smart Energy Systems and 4th Generation District Heating, November 13, 2018, Aalborg, Denmark.

26. Singh, S and Sørensen, K, Concrete thermal energy storage for steam generation: A numerical investigation. Proceedings of the 58th Conference on Simulation and Modelling (SIMS 2017), 032, Linköping University Electronic Press, Linköping Electronic Conference Proceedings, pp. 234-240, September 25, 2017, Reykjavik, Iceland, https://doi.org/10.3384/ecp17138234

27. Välikangas, T, Pajunen, S, Baczkiewicz, J, Singh, S and Sørensen, K, Effect of natural convection and radiation inside of a hollow beam in a standard fire. in Proceedings of the 58th SIMS Conference on Simulation and Modelling (SIMS 2017), Linköping University Electronic Press, Linköping Electronic Conference Proceedings, pp. 121-127, September 25, 2017, Reykjavik, Iceland.

28. Singh, S and Sørensen, K, Numerical investigation of conjugate heat transfer and flow performance of a fin and tube heat exchanger with vortex generators. Proceedings of the 58th SIMS Conference on Simulation and Modelling (SIMS 2017). 138 Edn, Linköping University Electronic Press, Linköping Electronic Conference Proceedings, pp. 13-19, September 25, 2017, Reykjavik, Iceland.

29. Singh, S, Sørensen, K and Condra, TJ, 'Numerical Modeling of Fin and Tube Heat Exchanger for Waste Heat Recovery’, The First Pacific Rim Thermal Engineering Conference, March 13-17, 2016, Waikoloa Beach, Hawaii, USA.

30. Singh, S, Sørensen, K and Condra, TJ, Parametric CFD Analysis to Study the Influence of Fin Geometry on the Performance of a Fin and Tube Heat Exchanger. in Proceedings of the 2016 9th EUROSIM Congress on Modelling and Simulation. IEEE Computer Society Press, pp. 111-116, 9th EUROSIM Congress on Modelling and Simulation, 12/09/2016, Oulu, Finland.

31. Singh, S, Sørensen, K and Condra, TJ, Performance study of a fin and tube heat exchanger with different fin geometry. in A Kitanovski and A Poredos (eds), Proceedings of the 29th International Conference on Efficiency, Cost, Optimisation, Simulation and Environmental Impact of Energy Systems (ECOS 2016), 19/06/2016, Portoroz, Slovenia.

32. Singh, S, Sørensen, K and Condra, TJ, Multiphysics Numerical Modeling of a Fin and Tube Heat Exchanger. in Proceedings of the 56th Conference on Simulation and Modelling (SIMS 56) Linköping, Sweden, October 7-9, 2015., 039, 07/10/2015, Linköping, Sweden.

33. Singh, S and Kumar, S, Development of Simple Drying Model for Performance Prediction of Solar Dryer: Theoretical Analysis. in Proceedings of International Conference on Energy Security, Global warming and Climate (SOLARIS-2012), I.K. International Publishers, February 7, 2012, Varanasi, India, 

34. Kumar, S and Singh, S, Evaluation of Specific Energy Consumption During Solar Drying of Cylindrical Potato Samples for Different Thickness and Loading Densities. Proceedings of International Conference on Energy Security, Global warming and Climate (SOLARIS-2012). I.K. International Publishers, February 7, 2012, Varanasi, India.

35. Kumar, S and Singh, S, Performance evaluation of forced convection mixed-mode solar dryer: Experimental investigation. World Congress on Sustainable Technologies (WCST 2011), 6114251, pp. 112-117, 2011 World Congress on Sustainable Technologies, WCST 2011, November 7, 2011, London, United Kingdom.

36. Kumar, S and Singh, S, Influence of air flow circulation and absorbed thermal energy on convective heat transfer during operation of mixed-mode solar dryer. in 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics 2011, Mauritius. 8th International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics (HEFAT-2011), 11/07/2011, Mauritius.

37. Singh, S. and Kumar, S, Thermal test procedure for mixed mode solar dryer. World Congress on Sustainable Technologies, WCST 2011., 6114237, pp. 50-55, 2011 World Congress on Sustainable Technologies (WCST 2011), November 7, 2011, London, United Kingdom.

38. Singh, S and Kumar, S, Comparative Study on Heat Transfer of Natural Convection Cabinet and Mixed-Mode Solar Dryers: An Experimental Investigation. Proceedings of Clean Energy Technologies and Energy Efficiency for Sustainable Development (ENERSTATE 2010), December 27, 2010, Dehradun, India.

39. Kumar, S and Singh, S, Methodologies for Determination of Forced Convective Heat Transfer Coefficient for Indirect and Mixed Mode Solar Dryers. Proceedings of Clean Energy Technologies and Energy Efficiency for Sustainable Development (ENERSTATE 2010), December 27, 2010, Dehradun, India.

Book Chapters:

1. DevRoy, A., Prakash, O., Singh, S., Kumar, A. Application of software in predicting thermal behaviour of solar stills, Green Energy and Technology, Springer, 2019

2. Singh S., Thermal testing methods for solar dryers, Green Energy and Technology, Springer, 2017