Publications

Book

• High Entropy Alloys, 2nd edition, B.S. Murty, J.W. Yeh, S. Ranganathan, P.P. Bhattacharjee, Elsevier, 2019.

• The Status of Bulk Metallic Glass and High Entropy Alloys Research, SR Reddy, PP Bhattacharjee, BS Murty, Future Landscape of Structural Materials in India, Springer, INAE, 2022, 233-278.

   Journals

1. M. Gor, M. Barnett, P. Bhattacharjee, D. Fabijanic, Microstructure and mechanical properties of Ti-6Al-4V alloy processed by additive friction stir deposition over a wide temperature range, Materials Science and Engineering: A 945 (2025) 149038.

2. N.K. Chaitanya, M.K. Singh, P.K. Ojha, S. Paul, S. Mallika, K. Guruvidyathri, P.P. Bhattacharjee, M. Vaidya, Oxidation behavior of Al0.3Cr1.3Co1Fe1Mn1Ni0.7 dual-phase high entropy alloy, Journal of Alloys and Compounds, Volume 1022, 2025, 179860, ISSN 0925-8388.

3. Rajakrishnan, N., Sadeghifar, M., Bhattacharjee, P., Champliaud, H., & Jahazi, M. (2025). Kinetics of Austenite Formation in a Medium-Carbon, Low-Alloy Steel with an Initial Martensite Microstructure: Influence of Prior Austenite Grain Size. Journal of Manufacturing and Materials Processing, 9(1), 10. 

4. Bhattacharjee, P. P., Teja, N. S., Paul, S., Ojha, P. K., & Saha, R. (2024). Annealing textures of low stacking fault energy (SFE) FCC materials: Traversing binary to high entropy alloys (HEAs). Journal of Alloys and Metallurgical Systems, 8, 100130. 

5. Ojha, P. K., Sunkari, U., & Bhattacharjee, P. P. (2024). Microstructure and mechanical properties of a severely cold-rolled and annealed dual-phase compositionally complex alloy (CCA) with an exceptionally deformable Laves phase. Intermetallics, 174, 108461. 

6. Bhattacharjee, P. P., & Reddy, S. R. (2024). A Brief Perspective on the Status and Future Prospects of Eutectic High-Entropy Alloys. Transactions of the Indian National Academy of Engineering, 9(3), 595-610. 

7. M. Gor, M. Barnett, D. Fabijanic and P. P. Bhattacharjee, Additive friction stir deposition of super duplex stainless steel: Microstructure and mechanical properties. Additive Manufacturing Letters, 2024 Vol. 9 Pages 100204

8. Superior strength-ductility balance of an extremely low stacking fault energy (SFE) high-entropy alloy (HEA) processed by novel hybrid-rolling, S. Paul, P.P.Bhattacharjee, Materials today communication, 38 (2024), 107678

9. Highly deformable Laves phase in a high entropy alloy, PK Ojha, S Yoshida, U Sunkari, B Tripathy, N Tsuji, PP Bhattacharjee, Scripta Materialia, 240 (2024), 115828

10. High Strain Rate Superplastic Flow and Fracture Characteristics of a Fine-Grained Eutectic High Entropy Alloy, SR Reddy, X Li, S Guo, PP Bhattacharjee, AH Chokshi, Metallurgical and Materials Transactions A, 2023

11. Cryo-rolling and annealing-mediated nano/ultrafine structure, texture, and properties of extremely low stacking-fault energy high entropy alloys: Comparative perspectives, S Paul, R Saha, PP Bhattacharjee, Journal of Alloys and Compounds, (2023) 170025

12. Effect of warm-rolling on microstructure and superior mechanical properties of a cost-effective AlCrFe2Ni2 high entropy alloy, B Tripathy, PK Ojha, PP Bhattacharjee, Journal of Alloys and Compounds 948 (2023), 169783 

13. Remarkable effect of warm-rolling temperature on the homogeneity of microstructure and texture of a cost-effective AlCrFe2Ni2 high entropy alloy, B Tripathy, R Saha, PP Bhattacharjee, Materials Characterization 201 (2023), 112957

14. Effect of ultrafine microstructure on interdiffusion-driven phase transformations in Ni-Sn sandwich diffusion couples, NK Chaitanya, B Yadav, PP Bhattacharjee, M Vaidya, Materials Today Communications (2023), 105843

15. Annealing-Mediated Microduplex Structure and Texture Evolution in Severely Cold-Rolled Nanolamellar Pearlite: A Perspective on the Effect of Starting Inter-lamellar Spacing, R Hamshini, B Tripathy, S Paul, S Narayanswamy, R Saha, PP Bhattacharjee, Metallurgical and Materials Transactions A (2023), 1-14

16. Effect of High Pressure Torsion on Microstructure and Properties of Intermetallic Containing CoCrFeNi2.1Nb0.2 High Entropy Alloy: Comparative Insights, A Gnaneshwar, U Sunkari, SR Reddy, B Tripathy, PP Bhattacharjee, Journal of Materials Engineering and Performance (2023), 1-8

17. Microstructure and texture of heavily cold-rolled and annealed extremely low stacking fault energy Cr26Mn20Fe20Co20Ni14 high entropy alloy: Comparative insights, S Paul, B Tripathy, R Saha, PP Bhattacharjee, Journal of Alloys and Compounds 930 (2023), 167418

18. Perpendicular magnetic anisotropy in a sputter deposited nanocrystalline high entropy alloy thin film, T Manoj, HP Perumal, B Paikaray, A Haldar, J Sinha, PP Bhattacharjee, Journal of Alloys and Compounds 930 (2023), 167337

19. Superior strength-ductility synergy of a cost-effective AlCrFe2Ni2 high entropy alloy with heterogeneous microstructure processed by moderate cryo-rolling and annealing, B Tripathy, PP Bhattacharjee, Materials Letters 326 (2022), 132981

20. Microstructure and unusually strong recrystallization texture of the FCC phase of a cost-effective high-strength dual-phase AlCrFe2Ni2 high entropy alloy, B Tripathy, R Saha, PP Bhattacharjee, Intermetallics 145 (2022), 107559.

21. Microstructure and texture of severely warm-rolled and annealed coarse-grained CoCrNi medium entropy alloy (MEA): A perspective on the initial grain size effect, J. Saha, R. Saha, P.P. Bhattacharjee, Journal of Alloys and Compounds 904 (2022) 163954.

22. Microstructure and texture development in CoCrNi medium entropy alloy processed by severe warm cross-rolling and annealing, J. Saha, R. Saha, P.P. Bhattacharjee, Intermetallics 143 (2022) 107463.

23. Germanium Antimony Bonding In Ba4Ge2Sb2Te10 with Low Thermal Conductivity Subhendu; Panigrahi, Gopabandhu; Ishtiyak, Mohd; Narayanswamy, Sake; Bhattacharjee, Pinaki P.; Niranjan, Manish K.; Prakash, Jai., Inorganic Chemistry, 61 (2022) 968-981.

24. Reactive Molten-Flux Assisted Syntheses of Single Crystals of Cs19Ln19Mn10Te48 (Ln = Pr and Gd) Crystallizing in a New Structure Type, Panigrahi, Gopabandhu, Jana, Subhendu; Narayanswamy, S, Bhatacharjee, Pinaki, Niranjan, Manish, Prakash, Jai, CrystalEngComm, 23 (2021) 8418-8429.

25. Development of ultrafine grained cobalt-free AlCrFe2Ni2 high entropy alloy with superior mechanical properties by thermo-mechanical processing, B. Tripathy, S.R.K. Malladi, P.P. Bhattacharjee, Materials Science and Engineering A., 831 (2022), 142190.

26. Microstructure and Texture of CoCrNi Medium Entropy Alloy (MEA) Processed by Severe Cryo-Rolling: A study vis-a-vis cold-rolling, J.Saha, R.Saha, S.R.K.Malladi, P.P. Bhattacharjee, Intermetallics 138 (2021) 107345.

27. Influences of thermomechanical processing by severe cold and warm rolling on the microstructure, texture, and mechanical properties of an equiatomic CoCrNi medium-entropy alloy (MEA), J. Saha, P.P. Bhattacharjee, Journal of Materials Engineering and Performance, 30 (2021), 8956–8971.

28. Ba2Ln1−xMn2Te5 (Ln = Pr, Gd, and Yb; x = Ln vacancy): syntheses, crystal structures, optical, resistivity, and electronic structure, Gopabandhu Panigrahi, Subhendu Jana, Mohd Ishtiyak,  S Narayanswamy,   Pinaki Bhatacharjee,   Kandalam V Ramanujachary,   Manish Niranjan and  Jai Prakash, Dalton Transactions, 50 (2021), 6688-6701.

29. High Entropy Alloys: Recrystallization, S.R. Reddy, Upender Sunkari, Pinaki Prasad Bhattacharjee, Encyclopedia of Materials: Metals and Alloys, 2022, 417-426.

30. Syntheses, crystal structures, optical, and theoretical study of two ternary chalcogenides CsSc5Te8 and Cs0.6(1)Ti6Se8 with tunnel structures, M. Ishtiyak, S. Jana, G. Panigrahi, A. K. Srivastava, S. Narayanswamy, P. P. Bhattacharjee, M. K. Niranjan, Jai Prakash, Solid State Science 114 (2021) 106577.

31. Effects of Cr Alloying on the Evolution of Solidification Microstructure and Phase Transformations of high-Nb containing γ-TiAl based Alloys, Vajinder Singh, Chandan Mondal, Rajdeep Sarkar, P.P. Bhattacharjee, P. Ghosal, Intermetallics, 131 (2021), 107-117.

32. Severe warm-rolling mediated microstructure and texture of equiatomic CoCrFeMnNi high entropy alloy: A comparison with cold-rolling, J. Saha, G. Ummethala, S.R.K. Malladi, P.P. Bhattacharjee*, Intermetallics, 129 (2021),107029.

33. Cross-rolling mediated microstructure and texture evolution in severely cold-rolled and annealed ultrafine pearlite, S. Narayanswamy, R. Saha, P.P. Bhattacharjee*, Materials Characterization, 171 (2021) 110751.

34. Strain dependent evolution of microstructure and texture in severely cold-rolled and annealed ultrafine pearlite, S. Narayanswamy, R. Saha, P.P. Bhattacharjee*, Materials Characterization, 169 (2020), 110583.

35. Influence of Process Parameters on Microstructure Evolution during Hot Deformation of a Eutectic High Entropy Alloy (EHEA), M. Zaid Ahmed, K. Chadha, S. R. Reddy, D. Shahriari, P.P. Bhattacharjee, M. Jahazi, Metall Mater Trans A, 51(2020), 6406–6420.

36. High Entropy Alloys: key issues under passionate debate”, K. Biswas, J-W Yeh, P.P. Bhattacharjee, J. Hosson, Scripta Materialia 188 (2020) 54-58.

37. Effect of niobium alloying on the microstructure, phase stability and mechanical properties of CoCrFeNi2.1Nbx high entropy alloys: Experimentation and thermodynamic modeling”, U Sunkari, SR Reddy, KS Athira, S Chatterjee, PP Bhattacharjee*, Materials Science and Engineering A 793 (2020) 139897.

38. Heterogeneous precipitation mediated heterogeneous nanostructure enhances strength ductility synergy in severely cryo-rolled and annealed CoCrFeNi2.1Nb0.2 high entropy alloy, Upender Sunkari, SR Reddy, BDS Rathod, SS Satheesh Kumar, R Saha, S Chatterjee, PP Bhattacharjee*, Scientific Reports, 10 (2020) 1-9.

39. Dynamic recrystallization of a β(B2)-Stabilized γ-TiAl based Ti–45Al–8Nb–2Cr-0.2B alloy: The contributions of constituent phases and Zener-Hollomon parameter modulated recrystallization mechanisms”, V. Singh, Chandan Mondal, R.Sarkar, P.P. Bhattacharjee, P. Ghosal, Journal of Alloys and Compounds, 828 (2020) 154386. 

40. An experimental study on strain-induced martensitic transformation behavior in SUS304 austenitic stainless steel during higher strain rate deformation by continuous evaluation of relative magnetic permeability”, Bo Cao, T. Iwamoto, P.P. Bhattacharjee*, Materials Science and Engineering A, Materials Science and Engineering: A 774 (2020): 138927.

41. Compressive creep behavior of a γ-TiAl based Ti–45Al–8Nb–2Cr-0.2B alloy: The role of β(B2)-phase and concurrent phase transformations." V. Singh, C. Mondal, R. Sarkar, P.P. Bhattacharjee, P. Ghosal, Materials Science and Engineering: A 774 (2020): 138891.

42. Tuning nanostructure using thermo-mechanical processing for enhancing mechanical properties of complex intermetallic containing CoCrFeNi2. 1Nbx high entropy alloys”, Upender Sunkari, SR Reddy, BDS Rathod, D Kumar, R Saha, S Chatterjee, P.P. Bhattacharjee*, Materials Science and Engineering A, 769 (2020) 138489.

43. Synthesis, crystal structure, optical absorption study, and electronic structure of Cs3FeCl5”, Subhendu Jana, Gopabandhu Panigrahi, S Narayanswamy, Mohd Ishtiyak, Manajit Das, Pinaki P Bhattacharjee, Manish K Niranjan, Jai Prakash, Solid State Science, 2019, 106604.

44. Microstructural design by severe warm-rolling for tuning mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy”, SR Reddy, Upender Sunkari, A Lozinko, R Saha, S Guo, P.P. Bhattacharjee*, Intermetallics, 114 (2019) 106601.

45. Engineering heterogeneous microstructure by severe warm-rolling for enhancing strength-ductility synergy in eutectic high entropy alloys, Materials Science and Engineering: A 764 (2019) 138226.

46. Nanostructuring with Structural-Compositional Dual Heterogeneities Enhances Strength- Ductility Synergy in Eutectic High Entropy Alloy”, S.R. Reddy, S. Yoshida, T. Bhattacharjee, N. Sake, A. Lozinko, S. Guo, P.P. Bhattacharjee*, N. Tsuji, Scientific Reports, 9(2019),11505.

47. Intrinsic extremely low thermal conductivity in BaIn2Te4: Synthesis, crystal structure, Raman spectroscopy, optical, and thermoelectric properties.", Mohd Ishtiyak, Subhendu Jana, S Narayanswamy, Abhishek K Nishad, Gopabandhu Panigrahi, Pinaki P Bhattacharjee, Jai Prakash, Journal of Alloys and Compounds, 802 (2019) 385–393.  

48. (Invited article) Development and homogeneity of microstructure and texture in a lamellar AlCoCrFeNi2.1 eutectic high entropy alloy severely strained in the warm-deformation regime, S.R. Reddy, U. Sunkari, A. Lozinko, S. Guo, P.P. Bhattacharjee*, Journal of Materials Research 34 (2019) 687-699.

49. Effect of prolonged aging on phase evolution and mechanical properties of intermetallic strengthened CoCrFeNi2.1Nbx high entropy alloys”, U. Sunkari, S.R. Reddy, S. Chatterjee, P.P. Bhattacharjee*, Materials Letters 248 (2019) 119-122.

50. Texture Homogeneity and Stability in Severely Warm-Rolled and Annealed Ultrafine Pearlite”, S. Narayanswamy, S.R. Reddy, R. Saha, P.P. Bhattacharjee*, Materials Science and Technology 35 (2019) 437-447.

51. Microstructural Characterization by Automated Crystal Orientation and Phase Mapping by Precession Electron Diffraction in TEM: Application to Hot Deformation of a γ-TiAl based Alloy, Vajinder Singh, Chandan Mondal, P.P. Bhattacharjee, P. Ghosal, Microscopy and Microanalysis, 25(6)(2019), 1457-1465.

52. "Hot Deformation of High Nb-containing γ-TiAl Alloy in the Temperature Range of 1000°-1200°C: Microstructural Attributes to Hot Workability", V. Singh, C. Mandal. P.P. Bhattacharjee, P. Ghosal, SN Applied Sciences, 1, 366 (2019)..

53. Evolution of microstructure and microtexture during hot deformation in an advanced P/M nickel base superalloy, S.S. Kumar, T. Raghu, P.P. Bhattacharjee*, G.A. Rao, U. Borah, Materials Characterization 146(2018) 217-36.

54. High temperature compressive flow behavior and associated microstructural development in a β- stabilized high Nb-containing γ-TiAl based alloy, Vajinder Singh, Chandan Mondal, Atul Kumar, P.P. Bhattacharjee and P. Ghosal, Journal of Alloys and Compounds 788 (2019) 573-585.

55. Uniaxial compression behaviour of porous copper: Experiments and modelling, B.R. Bodapati, P. Sudharshan Phani, P.P. Bhattacharjee*, G. Sundararajan, Materials Today Communications. 16 (2018) 320-329.

56. On the Constraint Factor and Tabor Coefficient Pertinent to Spherical Indentation, B.R. Bodapati,P. Sudharshan Phani, P.P. Bhattacharjee*, G. Sundararajan, Transactions of the  Indian  Institute  of Metal, 71(2018), 2893–2901.

57. Strain-path controlled microstructure, texture and hardness evolution in cryo-deformed AlCoCrFeNi2.1 eutectic high entropy alloy”, A. Patel, I. Wani, S.R. Reddy, S. Narayanaswamy, A. Lozink, R. Saha, S. Guo, P.P. Bhattacharjee*, Intermetallics 97 (2018) 12-21.

58. Simultaneous Strength-Ductility Enhancement of a Nano-Lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy by Cryo-Rolling and Annealing”, T. Bhattacharjee, I.S. Wani, S. Sheikh, I.T. Clark, T. Okawa, S. Guo, P.P. Bhattacharjee, N. Tsuji, Scientific Reports 8(2018) 3276.

59. Influence of strain on the formation of cold-rolling and grain growth textures of an equiatomic HfZrTiTaNb refractory high entropy alloy, R.R. Eleti, V. Raju, M. Veerasham, S.R. Reddy, P.P. Bhattacharjee*, Materials Characterization 136 (2018) 286-292.

60. Hot Deformation behavior of CoCrFeMnNi FCC High Entropy Alloy, Rajeshwar Reddy Eleti, Tilak Bhattacharjee, Lijia  Zhao, P.P.  Bhattacharjee, Nobuhiro  Tsuji,  Materials  Chemistry  and Physics 210 (2018) 176-186.

61. Effect of low temperature on tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy, Tilak Bhattacharjee, Ruixiao Zheng, Yan Chong, Saad Sheikh, Sheng Guo, Ian Thomas Clark, Toshiro Okawa, Irfan Samad Wani, Pinaki Prasad Bhattacharjee, Akinobu Shibata, Nobuhiro Tsuji, Materials Chemistry and Physics 210 (2018) 207-212.

62. Severe plastic deformation driven nanostructure and phase evolution in a Al0.5CoCrFeMnNi dual phase high entropy alloy, TS Reddy, IS Wani, T Bhattacharjee, SR Reddy, R Saha, P.P. Bhattacharjee* Intermetallics 91 (2017) 150-157.

63. Work hardening characteristics and microstructural evolution during hot deformation of a nickel superalloy at moderate strain rates, SS Satheesh Kumar, T Raghu, P.P. Bhattacharjee*, G Appa Rao, Utpal Borah, Journal of Alloys and Compounds 709 (2017) 394-409.

64. Deformation and Recrystallization Behavior of the Cast Structure in Large Size, High Strength Steel Ingots: Experimentation and Modeling, K.  Chadhaa, D.  Shahriari, R.Trembly, P.P. Bhattacharjee, M. Jahazi, Metallurgical and Materials Transactions A 48 (2017) 4297-4313.

65. Effect of strain path on microstructure and texture formation in cold-rolled and annealed FCC equiatomic CoCrFeMnNi high entropy alloy, S.R. Reddy, M.Z. Ahmed, G.D. Sathiaraj, P.P. Bhattacharjee*, Intermetallics 87 (2017) 94-103.

66. Superplastic-like flow in a fine grained equiatomic CoCrFeMnNi high entropy alloy (HEA), S.R. Reddy, S. Bapari, P.P. Bhattacharjee, A.H. Chokshi, Materials Research Letters 5 (2017) 408-414.

67. Cold-rolling and Recrystallization Textures of a Nano-lamellar AlCoCrFeNi2.1 Eutectic High Entropy Alloy, I.S. Wani, T. Bhattacharjee, S. Sheikh, I. T. Clark, M. H. Park, T. Okawa, S. Guo, P.P. Bhattacharjee*, N. Tsuji, Intermetallics 84 (2017) 42-51.

68. Tailoring nanostructures and mechanical properties of AlCoCrFeNi2.1 eutectic high entropy alloy using thermo-mechanical processing, I.S. Wani, T. Bhattacharjee, S. Sheikh, P.P. Bhattacharjee*, S. Guo, N. Tsuji, Materials Science and Engineering A 675 (2016) 99-109.

69. The effect of heating rate on microstructure and texture formation during annealing of heavily cold-rolled equiatomic CoCrFeMnNi high entropy alloy, G.D. Sathiaraj, C.W. Tsai, J.W. Yeh, M. Jahazi, P.P. Bhattacharjee*, Journal of Alloys and Compounds 688 (2016) 752-761.

70. Evolution of microstructure and texture during thermo-mechanical processing of a two phase Al0.5CoCrFeMnNi high entropy alloy, I.S. Wani, G. Dan Sathiaraj, M.Z. Ahmed, S.R. Reddy, P.P. Bhattacharjee*, Materials Characterization, 118 (2016) 417-424.

71. Microstructure and texture of heavily cold-rolled and annealed fcc equiatomic medium to high entropy alloys, G.D. Sathiaraj, M.Z. Ahmed,P.P. Bhattacharjee*, Journal of Alloys and Compounds 664 (2016) 109-119.

72. Strain rate dependent microstructural evolution during hot deformation of a hot isostatically processed nickel base superalloy, S. Satheesh, T Raghu, P.P. Bhattacharjee, G Appa Rao, U. Borah, Journal of Alloys and Compounds 681 (2016) 28-42.

73. Ultrafine grained AlCoCrFeNi2.1 eutectic high entropy alloy, I.S. Wani, T. Bhattacharjee, S. Sheikh, Y. Lu, S. Chatterjee, P.P. Bhattacharjee*, S. Guo, N. Tsuji, Materials Research Letters 4 (2016) 174-179.

74. Effect of heavy cryo-rolling on the evolution of microstructure and texture during annealing of equiatomic CoCrFeMnNi high entropy alloy, G.D. Sathiaraj, P.P. Bhattacharjee*, Che-Wei Tsai, Jien-Wei Yeh, Intermetallics 69 (2016) 1-9.

75. Effect of cold-rolling strain on the evolution of annealing texture of equiatomic CoCrFeMnNi high entropy alloy, G.D. Sathiaraj, P .P. Bhattacharjee*, Materials Characterization 109 (2015) 189-197.

76. Effect of prior recovery treatment on the evolution of cube texture during annealing of severely warm-rolled Al-2.5wt.%Mg alloy, J.R. Gatti, P .P. Bhattacharjee*, Metallurgical and Materials Transactions A 46A (2015) 4966-4977.

77. Constitutive modelling for predicting peak stress characteristics during hot deformation of hot isostatically processed nickel base superalloy, S. S. Satheesh Kumar, T Raghu, P .P. Bhattacharjee, G Appa Rao, Utpal Borah, Journal of Materials Science 50 (2015) 6444-6456.

78. “Effect of starting grain size on the evolution of microstructure and texture during thermomechanical processing of CoCrFeMnNi high entropy alloy”, G.D. Sathiaraj, P.P. Bhattacharjee*, Journal of Alloys and Compounds 647(2015) 82-96.

79. “Analysis of microstructure and microtexture during grain growth in low stacking fault energy equiatomic CoCrFeMnNi high entropy and Ni-60wt.%Co alloys”, G.D. Sathiaraj, P.P. Bhattacharjee* Journal of Alloys and Compounds 637(2015) 267-276.

80. “Microstructure, texture and tensile properties of a severely warm-rolled and annealed duplex stainless steel”, M. Ahmed, P.P. Bhattacharjee, Steel Research International 87 (2016) 472-483.

81. “Nucleation behavior and formation of recrystallization texture in pre-recovery treated heavily cold and warm-rolled Al-2.5wt.%Mg alloy”, J.R. Gatti, P.P. Bhattacharjee*, Materials Characterization 106 (2015) 141-151.

82. “Microtexture of constituent phases in a heavily warm-rolled and annealed duplex stainless steel”, M. Zaid, P.P. Bhattacharjee*, Materials Science and Engineering, 82(2015), Article number 012046.

83. “Evolution of microstructure and texture during annealing of Al-2.5%Mg-0.2%Sc severely deformed by a combination of accumulative roll bonding (ARB) and conventional rolling”, J.R. Gatti, P.P. Bhattacharjee*, IOP Conference Series: Materials Science and Engineering, 82 (2015), Article number 012045.

84. “Evolution of microstructure and crystallographic texture in severely cold rolled high entropy equiatomic CoCrFeMnNi alloy during annealing”, G. D. Sathiaraj, C. Lee, C. W. Tsai, J. W. Yeh, P. P. Bhattacharjee*, IOP Conference Series: Materials Science and Engineering, 82 (2015), Article number 012068.

85. “Microstructure and texture of Al-2.5wt.%Mg processed by combining Accumulative Roll Bonding and conventional rolling”, J.R. Gatti, P.P. Bhattacharjee*, Journal of Materials Engineering and Performance, 23 (2014) 4453-4462.

86. Evolution of microstructure and texture during isothermal annealing of a heavily warm-rolled duplex steel, M. Zaid, P.P. Bhattacharjee*, ISIJ International, 54 (2014) 2844-2853.

87. Effect of warm-rolling on the formation of microstructure and microtexture of the constituent phases in a duplex steel, M. Zaid, P.P. Bhattacharjee*, Materials Science Forum, 783-786 (2014) pp. 2555-2560.

88. Microstructure, Texture, and Tensile Properties of a Severely Warm-Rolled and Annealed Duplex Stainless Steel. steel research int., Ahmed, M.Z. and Bhattacharjee, P.P.* 87 (2016) 472-483.

89. Annealing textures of severely cold and warm-rolled Al-2.5%Mg alloy, J.R. Gatti, P.P. Bhattacharjee*, Journal of Alloys and Compounds, 615(2014) pp. 950-961.

90. Effect of change in strain path during cold rolling on the evolution of microstructure and texture in Al and Al-2.5%Mg, P.P. Bhattacharjee*, S. Saha, J.R. Gatti, Journal of Materials Engineering and Performance, 23 (2014) 458-468.

91. Microstructure and texture evolution during annealing of equiatomic CoCrFeMnNi high-entropy alloy, P.P. Bhattacharjee*, G.D. Sathiaraj, M. Zaid, J.R. Gatti, Chi Lee, Che Wei Tsai, Jien-Wei Yeh, Journal of Alloys and Compounds, 587(2014) 544-552.

92. Evolution of microstructure and texture during warm-rolling of a duplex steel, P.P. Bhattacharjee*, M. Zaid, G. D. Sathiaraj, B. Bhadak, Metallurgical and Materials Transactions A, 45 (2014) 2180-2191.

    1.  

93. Effect of Warm Rolling on the Evolution of Microstructure, Microtexture and Mechanical Properties of Commercial Grade Duplex Steel, B. Bhadak, M. Zaid, P.P. Bhattacharjee*, Procedia Materials Science 5 (2014), 855-862.

94. Texture evolution during cross-rolling and annealing of high purity nickel, P.P. Bhattacharjee*, M. Joshi, V.P. Chaudhary, M. Zaid, Metallurgical and Materials Transactions A, 44 (2013) 2707-2716.

95. The effect of starting grain size on the evolution of microstructure and texture in nickel during processing by cross-rolling, P.P. Bhattacharjee*, M. Joshi, V.P. Chaudhary, M. Zaid, Materials Characterization 76 (2013) 2127.

96. Evolution of microstructure and texture during cold rolling and annealing of a highly cube textured ({001}<100>) polycrystalline nickel sheet, P.P. Bhattacharjee*, Y. Takatsuji, Y. Miyajima, D. Terada and N. Tsuji, Metallurgical and Materials Transactions A, 43 (2012) 2442-2452.

97. Evolution of microstructure and texture during cold rolling and annealing of a highly cube textured ({001}<100>) polycrystalline nickel sheet with and without strong starting cube texture, P.P. Bhattacharjee*, Y. Takatsuji, Y. Miyajima, D. Terada and N. Tsuji, Materials Science Forum 753 (2013) 293-296.

98. Effect of ultrahigh straining on the evolution of cube texture ({100}<100>) in high purity nickel, P.P.    Bhattacharjee*, N. Tsuji, Materials Science Forum, Vols.702-703 (2012), pp.406-410.

99. Stability of Cube Oriented Grains during Cold-Rolling of Highly Cube-Oriented Polycrystalline Nickel, Nobuhiro Tsuji, Yoshihiro Takatsuji, Yoji Miyajima, P.P. Bhattacharjee, Daisuke Terada, Materials Science Forum 702-703 (2012), pp.402-405.

100. Effect of initial grain size on the evolution of {001}<100> texture in severely deformed and annealed high purity Nickel, P.P. Bhattacharjee*, N. Tsuji and R.K. Ray, Metallurgical and Materials Transactions A, 42 (2011), pp.2769-2780.

101. Development of Textured Coated Superconductor Substrate Tapes by Severe Plastic Deformation Processing, P.P. Bhattacharjee* and N. Tsuji, Materials Science Forum, 667-679 (2011) 1189-1194.

102. Development of Highly Cube Textured Nickel Superconductor Substrate tapes by Accumulative Roll Bonding (ARB), P.P. Bhattacharjee* and Nobuhiro Tsuji, International Journal of Materials Research (formerly Z. Metallkunde), 102 (2011) 173-182.

103. “Evolution of Deformation and Recrystallization Textures in High Purity Ni and Ni-5at.%W Alloy”, P.P. Bhattacharjee, R.K. Ray and N. Tsuji, Metallurgical and Materials Transactions A, 41 (2010) 2856- 2870.

104. Microstructure and Texture Evolution During the Accumulative Roll Bonding of Pure Ni, P.P. Bhattacharjee* and N. Tsuji, Microstructures and Textures in Steels and Other Materials, Springer, London, 2009, 421-429.

105. Texture evolution in pure aluminum subjected to monotonic and reversal straining in high pressure torsion, D. Orlov, P.P Bhattacharjee*, Y. Todaka, M. Umemoto and N. Tsuji, Scripta Materialia 60 (2009) 893-896.

106. Cold-rolling and recrystallization textures of a Ni-5at.%W alloy, P.P. Bhattacharjee*, R.K. Ray and N. Tsuji, Acta Materialia 57 (2009) 2166-2179.

107. Development of cube texture in cold-rolled and annealed multilayer tapes for coated superconductor applications, P.P. Bhattacharjee and R.K. Ray, Ceramic Transactions 201 (2008) 381- 390.

108. Reversal straining to manage structure in pure aluminum under SPD, D. Orlov, P.P. Bhattacharjee*, Y. Todaka, M. Umemoto and Nobuhiro Tsuji, Materials Science Forum, 584-586 (2008) 133-138.

109. Processing and Characterization of Ni Base Coated Superconductor Substrate Tapes with Layered Architecture, P.P. Bhattacharjee* and R.K. Ray, IEEE Transaction on Applied Superconductivity 18 (2008) 1704-1710.

110. Texture and Mechanical Properties of Cold Deformed and Annealed Multilayer Ni Base Substrate Tapes Prepared by a Powder Metallurgy Route, P.P. Bhattacharjee*, R.K. Ray and A. Upadhyaya Materials Science and Engineering A 488 (2008) 84-91.

111. Effect of processing variables on cube texture formation in powder metallurgically prepared Ni and Ni-W alloy tapes for use as substrates for coated conductor applications, P.P. Bhattacharjee* and R.K. Ray, Materials Science and Engineering A 459 (2007) 309-323.

112. Enhancement of cube texture in Ni by the addition of W or Mo, R.K. Ray and P.P. Bhattacharjee*, Philosophical Magazine 87(2007) 2417-2426.

113. Nickel base substrate tapes for coated superconductor applications (Review Article), P.P. Bhattacharjee*, R.K. Ray and A. Upadhyaya, Journal of Materials Science 42 (2007) 1984-2001.

114. Recrystallization textures of powder metallurgically prepared pure Ni, Ni-W and Ni-Mo alloy tapes for use as substrates for coated superconductors, P.P. Bhattacharjee*, R.K. Ray and A. Upadhyaya Physica C: Superconductivity 449 (2006) 116-121.

115. Effect of sintering temperature on grain boundary character distribution in pure nickel, P.P. Bhattacharjee, S.K. Sinha, A. Upadhyaya, Scripta Materialia 56 (2007) 13-16.

116. Development of cube texture in pure Ni, Ni-W and Ni-Mo alloys  prepared by the powder metallurgy route, P.P. Bhattacharjee*, R.K. Ray and A. Upadhyaya, Scripta Materialia 53 (2005) 1477- 1481

117. Cube texture formation in P/M Ni, Ni-W and Ni-Mo alloy tapes for coated superconductor applications, P.P. Bhattacharjee*, R.K. Ray and A. Upadhyaya, Materials Science Forum 495-497 (2005) 1437-1442.

118. Development of Cube Texture in Pure Ni Following Ultrahigh Straining by Accumulative Roll Bonding and Annealing, P. P. Bhattacharjee, and Nobuhiro Tsuji, Materials Science Forum, 715 (2012), pp. 521-521

119. Development of Textured Single layer and Multilayer Coated Superconductor Substrates by the Powder Metallurgy Route, P.P. Bhattacharjee, R.K. Ray and A. Upadhyaya, Transactions-Powder metallurgy association of India Hyderabad 32 (2006), p. 57

120. Deformation And Recrystallization Textures in Pure Ni and Ni-W Alloy Prepared by the P/M Route, , P.P. Bhattacharjee, R.K. Ray and A. Upadhyaya, Transactions of the Indian Institute of Metals 58.5 (2005).

121. Cube Texture Formation in P/M Ni, Ni-W and Ni-Mo Alloy Tapes for Coated Superconductor Applications, P.P. Bhattacharjee, R.K. Ray and A. Upadhyaya, Materials Science Forum, 495-497 (2005), pp. 1437-1442.

122.  Alloyed Nickel Base Substrate Tapes for Coated Superconductor Applications, P.P. Bhattacharjee, R.K. Ray and A. Upadhyaya, Transactions of the Indian Institute of Metals 57.5 (2004).

International/National Conference/Workshops (2014-2019)

1. “Bulk Heterostructured High Entropy Alloys: Emergence of a Novel Class of Advanced Structural Materials”, P.P. Bhattacharjee, 1st International Conference on Processing and Characterization of Materials, ICPCM 2018, December 6-8 2018, NIT Rourkela, India (invited lecture).

2. “High Entropy Alloys with Tailored Heterogeneities: A Novel Class of Advanced Structural Materials”, P.P. Bhattacharjee, Advances in Metallurgy and Manufacturing Processes, July 13-14, 2018 Hyderabad, India (invited lecture).

3. Microstructure and texture of severely warm-rolled nano-lamellar AlCoCrFeNi2.1 eutectic high entropy alloy, S.R. Reddy, P.P. Bhattacharjee, NMD-ATM 2018, 14-16th November 2018, Kolkata, India (Best paper award).

4. Thermo-mechanical processing strategies for developing AlCoCrFeNi2.1 eutectic high entropy alloy with outstanding strength-ductility balance, P.P. Bhattacharjee, NMD-ATM 2017, 11-14th November, BITS Pilani, Goa, India (Invited lecture).

5. Microstructural engineering for developing AlCoCrFeNi2.1 eutectic high entropy alloy with outstanding strength-ductility combination, P.P. Bhattacharjee, T. Bhattacharjee, I.S. Wani, S. Sheikh, I.T. Clark, T. Okawa, S. Guo, N. Tsuji, International Union of Material Research Societies‐International Conference in Asia (IUMRS-ICA 2017)), 5-9th November, 2017, Taipei, Taiwan (invited lecture).

6. Effect of severe cold-rolling and annealing on microstructure and tensile properties of AlCoCrFeNi2.1 eutectic high entropy alloy, I S Wani, T Bhattacharjee, S Sheikh, Y Lu, S Chatterjee1, S Guo, P P Bhattacharjee and N Tsuji, NanoSPD 7, 2-8th July, 2017, Sydney, Australia.

7. Microstructure and Remarkable Mechanical Properties of a Thermo-Mechanically Processed AlCoCrFeNi2.1 Eutectic High Entropy Alloy, P.P. Bhattacharjee, International Workshop on High Entropy Materials (IWHEM 2017), March 11-12 2017, Hyderabad, India.

8. Annealing Texture of FCC Equiatomic CoCrFeMnNi High Entropy Alloys, P.P. Bhattacharjee, 1st International Conference in High Entropy Materials (ICHEM 2016), National Tsinghua University, Hsinchu, Taiwan, 6-9th November, 2016 (invited lecture).

9. Thermo-Mechanical processing of a novel AlCoCrFeNi2.1 Eutectic High Entropy Alloy, Irfan S. Wani, Tilak Bhattacharjee, Samad Sheikh, Yiping Lu, Subhradeep Chatterjee, Sheng Guo, Nobuhiro Tsuji, Pinaki P. Bhattacharjee, International Symposium of Research Scholars on Metallurgy, Materials Science and Engineering (ISRS 2016), December 21-23, 2016, IIT Madras, India. (Best paper award).

10. Processing, Microstructure and Properties of a Novel AlCoCrFeNi2.1 Eutectic High Entropy Alloy, P.P. Bhattacharjee, NMD-ATM 2016, 11-14th November 2016, IIT Kanpur, India (Invited lecture).

11. Microtexture aspect of grain growth in an equiatomic CoCrFeMnNi HEA: A comparative study with binary Ni-60at.%Co alloy, G.D. Sathiaraj, P.P. Bhattacharjee, NMD-ATM 2015, 13-16th November, Coimbatore, India (Best paper award).