Journals
Combined effect of Sr-addition and pressure induced solidification on eutectic-Si morphology and mechanical properties of squeeze cast Al-Si binary alloy, G Vasudevan, R Anbukkarasi, Hari Sanil, M Ravi, Materials Today Communications, 34, 105104 (2023)
Functionally Graded Al-Sic Composites by Squeeze Infiltration Technique, Arsha, A. G., Manoj, V., Akhil, M. G., AG Arsha, MG Akhil, Vishak Manoj, PR Rajimol, R Anbukkarasi, TPD Rajan, S Dhanalakshmi, International Journal of Metalcasting, 1-11, 2023.
Squeeze infiltration processing and characterization of Silicon Reinforced Composites, Arsha, A. G., Manoj, V., Akhil, M. G., Anbukkarasi, R., Rajimol, P. R., & Rajan, T. P. D., Materials Today Communications, 103870, 2022.
Effect of sliding-friction induced sub-surface strain hardening on the wear behavior of friction stir processed aluminium AA2219, Vimal Edachery, Aashish John, Agilan M, R Anbukkarasi, and Satish V. Kailas, Tribological Online, 2022.
Influence of complete Tool-offset position on Intrinsic Microstructure and Fatigue life of AA2024 Alloy-Cu Joint made by Friction Stir Welding, A. Rajendran. R. Hariharan, and S. Kailas, Journal of Materials Performance and Characterization, vol. 11. Published ahead of print, 20 September 2021.
Influences of shape of the new interfaces and morphology of the intermetallics on mechanical properties of aluminum AA2024–pure copper joints by friction stir welding, Anbukkarasi, R., and Satish V. Kailas, The International Journal of Advanced Manufacturing Technology, 106, no. 11 (2021): 5071-5083.
Effect of axial load depends deformation rate on the grain size distribution and mechanical properties of friction stir processed copper, A. Rajendran, N. Nadammal, K. Singh, and S. Kailas, Journal of Materials Performance and Characterization, vol. 10, no. 2 (2020): 268-278.
Synergistic influence of surface topography, hardness and real area of contact on the tribological properties of stress equalization heat treated Inconel X-750 subjected to shot blasting, Vimal Edachery, Aashish John, R Anbukkarasi, Vivek S, Santosh Kumar and Satish V. Kailas, Journal of Materials Processing and Characterization, 10, no. 2 (2020): 322-332.
Role of third material (interlayer) on mechanical properties of the aa2024–copper joints carried out by friction stir welding (FSW), Anbukkarasi, R., and Satish V. Kailas, Transactions of the Indian Institute of Metals 72, no. 6 (2019): 1603-1606.
Studies on friction stir welding of Al-Cu-Li (AA2195) alloy, Agilan, M., R. Anbukkarasi, T. Venkateswran, Paul G. Panicker, Satish V. Kailas, D. Sivakumar, and Bhanu Pant, Materials Science Forum, vol. 830, pp. 274-277. Trans Tech Publications Ltd, 2015.
Conference
Microstructural Evaluation of SS304, 617M similar and dissimilar welds fabricated by TIG process Anbukkarasi Rajendran, S. Kumar, Karthikeyan S., and S. Suwas, IGCAR, NSWEST 2021.
TIG welding of SS304HCu-617M dissimilar joint for AUSC application, Anbukkarasi, R., D Banerjee, Karthikeyan S, K Chattopadhyay, S Suwas and S Kumar, Conference on High Temperature Structural Materials 2020 (HTSM 2020), Oct 2020, India.
Role of Zn interlayer on the properties of friction stir welding joint, Anbukkarasi, R., and Satish V. Kailas, International Conference on Advanced Materials and Manufacturing Processes for Strategic Sectors (ICAMPS 18), Oct 2018, India.
Dissimilar Friction Stir Welding: Characterizing Residual Stress, Interface Topology Kinetics and Electrical Resistivity, Anbukkarasi R., Amlan Kar, Satish V. Kailas, Sounak Choudhury, Simha K. R. Y., All India Seminar on Residual Stress and Advanced NDE Techniques for Structural Integrity Assessment: Key Challenges & Remedies, May 2018, India.
Effect of tool offset position on properties of friction stir welded Aluminium AA2024 alloy - copper joints, Anbukkarasi, R., and Satish V. Kailas, Indian Institute of Welding- International Congress 2017 (IIW IC 2017), Dec 2017, India.
Elastic Response of Friction Stir Welded Bimetallic Disk, P. Wanchoo, Anbukkarasi R., Santosh Kumar, K. R. Y. Simha and Satish V. Kailas, All India Seminar on Residual Stress: Key Challenges & Remedies, 2016, India.
Microstructure and Flow Studies of Friction Stir Welded AA2024- Copper Joints with offset Tool Axis, Anbukkarasi, R., and Satish V. Kailas, Twenty-Four International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXIV), Dec 2015, Japan.
Effect of heat treatment on mechanical properties of friction stir welded Aluminium AA2024- copper joints, Anbukkarasi, R., and Satish V. Kailas, Nano-Yantrika 2015, India.
Influence of tool position in interfacial microstructure of AA2024- Cu joints by Friction Stir Welding, Anbukkarasi, R., and Satish V. Kailas, International Conference on Friction Based (ICFP), on Sep 2014, India.
Electrical Conductivity Measurements made on Diffusion bonded Commercially Pure Copper with an Aluminium Alloy Using Friction Stir welding (FSW), Anbukkarasi R., Satish V. Kailas and T.S. Srivatsan, Twenty Second International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXII), on Dec 2013, Singapore.
Mechanism for the formation of defect free joints in Aluminum-Copper by Friction Stir Welding, Anbukkarasi R., P.G. Venkata Krishnan, Satish V. Kailas and T.S. Srivatsan, Twenty First International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXI), Dec 2012, India.
Effect of tool position on AA2024-Commercial pure Cu dissimilar metal joints by Friction Stir Welding Process (FSW), Anbukkarasi R., P.G. Venkata Krishnan and Satish V. Kailas, International Conference on the Strength of Materials (ICSMA-16), Aug 2012, India.
Effect of Hard facing on mechanical properties of the mild steel using GTAW process, Anbukkarasi R., and P.G. Venkata Krishnan, Mass’11, A national Level Technical Symposium, Mar 2011, India.