Search this site
Embedded Files
Skip to main content
Skip to navigation
Artemis CubeSat Kit
Home
Overview
Mission
Preface
Safety Procedures
Educational Resources
Publications
After You Receive Your Kit
Unboxing & Assembly
Testing
Power Distribution Unit
On Board Computer
Antenna Board
Battery Board
Solar Panels
Subsystem Information
Artemis Subsystems
Avionics
Introduction
On Board Computer
Electrical Power System
Power Distribution Unit
Battery Board
Solar Panels
Thermal
Communications
Payload
Camera Board
Wire Harnessing
Mechanical
Introduction
Structure References
Hardware List
Software
Introduction
Prerequisites
Using a Command Line Interface
Installing Git
Installing Visual Studio Code
COSMOS
COSMOS Installation
Teensy 4.1 Software
Installing Arduino IDE 2.0 & Artemis Library
Setting up the Teensy 4.1 FSW
Raspberry Pi Software
Setting up the RPi
Running the RPi Flight Software
RPi Power Saving Settings
Ground Station Software
Setting up the Ground Station Test SW
Using the GS Software and Commanding the Satellite
PDU Software
Artemis CubeSat Kit
Using the GS Software and Commanding the Satellite
12.0 Using the Ground Station Test SW and Communicating with the Artemis Cubesat Kit
Continue to the PDU Software Section
Report abuse
Report abuse
