3D print

My creation is a soap holder. I learned how how uses a cad program to make a soap holder.Some standards that my project used are Empowered Leaner because I pick it but I asked a friend to help me with it so I could get it right and so I could have it so it didn't fall apart. Another standard I used was Innovative Designer because I had to uses tools to make my soap holder and I had to have a plan before I made my soap holder. A statement of a challenge I overcome was making a soap holder because when I was making my soap holder it was some what hard to uses Tinkercad again because I could not fined something to make the holes. How I overcame it was by having help from a friend and just making sure that the sides were touching and were in the right spot. Something I would do differently is make the hole that the water comes out of the on the side not so sharp and pointy. If you worked on houses or on buildings you could uses a 3D printer to make the house that you are building that day or if you are building something different you can still 3D print a picture of a the building or the house you are build that day you could uses a 3D printer to show the people that you are building the house for and you could show the people that are building the house if that is good or bad and if they say bad you can start over and make it look different.