Eva Lantsoght

PUBLICACIONES:

Tesis y Disertaciones

Lantsoght, E.O.L. (2013). “Shear capacity of reinforced concrete slabs under concentrated loads close to the support.” Ph.D. Dissertation, Delft University of Technology, Delft, the Netherlands.

Lantsoght, E. (2009). “Literature Review of Punching Shear in Reinforced Concrete Slabs.” Structural Engineering, Mechanics and Materials Research Report No. 09-10. Georgia Institute of Technology, Atlanta, GA.

Lantsoght, E. (2008). “Evaluation of the new insights on buckling of reinforced concrete column.” (en Holandés) MS.c Thesis, Vrije Universiteit Brussel, Bruselas, Bélgica.

Artículos en Revistas Evaluadas por Expertos (Journal Papers)

Kalsbeek, I., Arragon, M. v., Vries, R. d., Ghossein, A., Lourens, K., Plas, A. v. d., Heinsbroek, A., Yip, C., Semiari, A., Tian, K., Kabos, M., Griemink, A., Oortmerssen, L. v., Autar, N., Kraus, J., Reenen, K. v., Smaling, H., Gemeren, W. v., Straten, R. v., Teeuwen, B., Joosten, S., Altinga, N., Markerink, S., Vries, W. d., Lantsoght, E.O.L., and Hoogenboom, P. (2011). "Staafwerkmodellen voor wandliggers getoetst." Cement, 7(2011).

Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2011). "Shear capacity of slabs and slab strips loaded close to the support." SP287 – Recent Developments in Reinforced Concrete Slab Analysis, Design and Serviceability, pp. 5.1-5.17.

Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A., (2012) “Spreiding puntlasten plaatviaducten.” Cement 4(2012).

Lantsoght, E.O.L., van der Veen, C., Walraven, J, de Boer, A. (2013) “Shear Assessment of Reinforced Concrete Slab Bridges”. Structural Engineering International 4/2013, pp. 418-426.

Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2013). "Shear in One-way Slabs under a Concentrated Load close to the support." ACI Structural Journal, Vol. 110, No. 2, pp. 275-284.

Lantsoght, E.O.L., van der Veen, C., Walraven, J, (201X) “Transverse Load Redistribution and Effective Shear Width in Reinforced Concrete Slabs”. Heron (in press).

Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J.(2014) "Influence of width on shear capacity of reinforced concrete members." ACI Structural Journal Vol. 111, No. 6, pp. 1441-1450.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2015) "One-way slabs subjected to a combination of loads failing in shear." ACI Structural Journal, Vol. 112, No. 4, pp. 417-426.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2015). "Effective Shear Width of Concrete Slab Bridges." Institute of Civil Engineers – Bridge Engineering, (available ahead of print online)

Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2015). "Database of wide concrete members failing in shear." Magazine of Concrete Research, Vol. 67, No. 1, pp. 33-52.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2015). "Transition from one-way to two-way shear in slabs under concentrated loads." Magazine of Concrete Research, Vol. 67, nr. 17, pp. 909-922.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2015). "Proposal for the extension of the Eurocode shear formula for one-way slabs under concentrated loads." Engineering Structures, Vol. 95, pp. 16-24.

Lantsoght, E.O.L., van der Veen, C., Walraven, J, (2015) “Transverse Load Redistribution and Effective Shear Width in Reinforced Concrete Slabs”. Heron. V. 60, Nr. 3, pp. 145-180.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2016). "Comparison of Eurocode and AASHTO for shear in slab bridges." Institute of Civil Engineers – Bridge Engineering, 169, BE4, 285-297

Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Walraven, J. (2016). "Case Study on Aggregate Interlock Capacity for the Shear Assessment of Cracked Reinforced Concrete Bridge Cross-sections." Journal of Bridge Engineering - ASCE, Vol. 21, Nr. 5, pp. 040160041-10.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2016). "Proposal for the fatigue strength of concrete under cycles of compression" Construction and Building Materials, Vol. 107, 15 March 2016, pp. 138-156.

Lantsoght, E.O.L, van der Veen, C., de Boer, A. and Walraven, J.C. (2016). “Querkrafttragfähigkeit von Platten nähe Auflagern - Übersicht diverser Versuche,” Beton- und Stahlbetonbau, Vol. 111, No. 5, p. 288 – 300

Lantsoght, E.O.L., van der Veen, C. de Boer, A., Hordijk, D.A. (2016). “Probabilistic prediction of the failure mode of the Ruytenschildt Bridge”, Engineering Structures, V. 127, pp. 549 – 558

Lantsoght, E.O.L., Yang, Y., van der Veen, C., de Boer, A., Hordijk, D.A. (2016). “Ruytenschildt Bridge: field and laboratory testing”, Engineering Structures. V. 128, pp. 111-123.

Lantsoght, E.O.L., van der Veen, C., Hordijk, D.A., de Boer, A., (2017). "Development of recommendations for proof load testing of reinforced concrete slab bridges" Engineering Structures, Vol. 152, pp. 202-210.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A., (2017). "Proof load testing of reinforced concrete slab bridges in the Netherlands" Structural Concrete, Vol. 18, No. 4, pp. 597-606.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A., (2017). "Required proof load magnitude for probabilistic field assessment of viaduct De Beek" Engineering Structures, Vol. 148, pp. 767-779.

Lantsoght, E.O.L., Yang, Y., van der Veen, C., de Boer, A., Hordijk, D.A., (2017). "Beam experiments on acceptance criteria for bridge load tests" ACI Structural Journal, Vol. 114, No. 4, pp. 1031-1042

Lantsoght, E.O.L., Koekkoek, R.T., van der Veen, C., Hordijk, D.A., de Boer, A. (2017). "Pilot proof-load test on viaduct de Beek: case study" Journal of Bridge Engineering, (in press)

Lantsoght, E.O.L., van der Veen, C., de Boer, A. (2017). "Plastic model for symmetrically and asymmetrically loaded reinforced concrete slabs" ACI SP on slabs.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., and Alexander, S.D.B (2016). "Bridging the gap between one-way and two-way shear in slabs" ACI SP on punching.

Lantsoght, E.O.L., Koekkoek, R.T., Hordijk, D.A., de Boer, A., (2017). “Towards standardization of proof load testing: pilot test on viaduct Zijlweg”, Structure and Infrastructure Engineering (available online ahead of print)

Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). "State-of-the-art on load testing of concrete bridges" Engineering Structures, Vol. 150, pp. 231-241

Lantsoght, E.O.L., van der Veen, C., de Boer, A. (2017) “Extended Strip Model for slabs under combinations of loads”, Engineering Structures, Vol. 145, pp. 60-69.

Bonifaz, E.A., Baus, J.F., Lantsoght, E.O.L., (2017). “Modeling Concrete Material Structure: A Two-Phase Meso Finite Element Model.” Journal of Multiscale Modeling, V. 8, No. 2, 12 pp.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A., (2017). "Required proof load magnitude for probabilistic field assessment of viaduct De Beek" Engineering Structures, Vol. 148, pp. 767-779.

Lantsoght, E.O.L., Yang, Y., van der Veen, C., de Boer, A., Hordijk, D.A., (2017). "Beam experiments on acceptance criteria for bridge load tests" ACI Structural Journal, Vol. 114, No. 4, pp. 1031-1042

Lantsoght, E.O.L., Koekkoek, R.T., van der Veen, C., Hordijk, D.A., de Boer, A. (2017). "Pilot proof-load test on viaduct de Beek: case study" Journal of Bridge Engineering, Vol. 22, No. 12.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Collapse test and moment capacity of the Ruytenschildt Reinforced Concrete Slab Bridge”, Structure and Infrastructure Engineering, V. 13, No. 9, pp. 1130-1145.

Lantsoght, E.O.L., Koekkoek, R.T., Hordijk, D.A., de Boer, A., (2018). “Towards standardization of proof load testing: pilot test on viaduct Zijlweg”, Structure and Infrastructure Engineering, Vol. 14, No. 3, pp. 365-380.

Lantsoght, E.O.L., de Boer, A., van der Veen, C. (2017). “Levels of Approximation for the shear assessment of reinforced concrete slab bridges”, Structural Concrete V. 18, No. 1, pp. 143-152

Lantsoght, E.O.L., de Boer, A., van der Veen, C., (2017). "Distribution of peak shear stress in finite element models of reinforced concrete slabs," Engineering Structures, Vol. 148, 571-583.

Halicka, A., Hordijk, D. A., Lantsoght, E.O.L. (2018). “Rating of concrete road bridges with proof loads” ACI SP-323 Evaluation of Concrete Bridge Behavior through Load Testing – International Perspectives, 18 pp.

Lantsoght, E.O.L., Van der Veen, C., de Boer, A., Hordijk, D.A. (2018). “Assessment of slab bridge through proof loading in the Netherlands” ACI SP-323 Evaluation of Concrete Bridge Behavior through Load Testing – International Perspectives, 20 pp.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., van der Ham, H. (2018). “Long-term material and structural behavior of high strength concrete cantilever bridge: results of twenty years monitoring.” Structural Concrete (available online ahead of print)

Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). "State-of-the-art on load testing of concrete bridges" Engineering Structures, Vol. 150, pp. 231-241

Lantsoght, E.O.L., van der Veen, C., Hordijk, D.A., de Boer, A., (2017). "Development of recommendations for proof load testing of reinforced concrete slab bridges" Engineering Structures, Vol. 152, pp. 202-210.

Capítulos de libro

Lantsoght, E.O.L. (2014) “Share your research process via social media.” Invited essay in 53 interesting ways to communicate your research, ed. I. Daly & A. Brophy Haney, The Professional and Higher Partnership, Suffolk, UK.

Lantsoght, E.O.L. (2017) “Chapter 10: Field assessment of a concrete bridge: case study”, in Eco-efficient Repair and Rehabilitation of Concrete Infrastructures, F. Pachecho Torgal, R. Melchers, X. Shi, A. Saez, N. de Belie, K. Van Tittelboom, eds., Woodhead publishing series in civil and structural engineering, Cambridge, UK.

Libros

Lantsoght, E.O.L. (2016) “Top PhD Advice from Start to Defense and Beyond – Focus on the Netherlands with Universal Tips&Tricks”. Ed. Francien Horrevorts, Academic Transfer, Bookboon, London, UK, 94 pp.

Lantsoght, E.O.L. (2018) “The A-Z of the PhD Trajectory”, Springer Verlag.

Lantsoght, E.O.L. (ed.) (2019) “Load testing of bridges”, in: Structures and Infrastructures, D. Frangopol, series ed. Taylor and Francis

Artículos Presentados en Conferencias

Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2010). "Shear tests of reinforced concrete slabs with concentrated loads near to supports." 8th fib international PhD Symposium in Civil Engineering, G. Fisher, M. Geiker, O. Hededal, L. Ottosen, and H. Stang, eds., DTU Byg, Technical University of Denmark, Kgs. Lyngby, Denmark, pp. 81-86.

Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2010). "Experimental study of reinforced concrete bridge decks under concentrated loads near to supports." Structural Faults and Repair, 13th International Conference and Exhibition, Edinburgh, UK, 12 pp.

Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2011). "Experimental Study of Shear Capacity of Reinforced Concrete Slabs." ASCE Structures Congress, Las Vegas, NV, pp. 152-164.

Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2011). "Experimental Study of Shear in Reinforced Concrete One-Way Slabs subjected to Concentrated Loads." fib symposium Prague, pp. 551-554

Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2012). "Residual Capacity from aggregate interlock of cracked reinforced concrete slab bridge." IABMAS 2012, 6^th international conference on Bridge Maintenance, Safety and Management, Villa Erba, Lake Como, Italy, pp. 3368-3375

Lantsoght, E.O.L. (2012). "Shear tests of reinforced concrete slabs and slab strips under concentrated loads." 9^th fib International PhD Symposium in Civil Engineering, Karlsruhe, Germany, pp. 3-8.

Lantsoght, E.O.L., van der Veen, C., and Walraven, J. (2012). "Shear assessment of solid slab bridges." ICCRRR 2012, 3rd International Conference on Concrete Repair, Rehabilitation and Retrofitting, Cape Town, South Africa, pp. 827-833.

Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A., (2013). "Shear assessment of reinforced concrete slab bridges" TRB 2013 Washington DC , 17pp.

Lantsoght, E.O.L., van der Veen, C., Walraven, J., (2013) "Shear capacity of slabs under a combination of loads" fib Symposium 2013 Engineering a Concrete Future Technology, Modeling & Construction, Tel Aviv, Israel, 12 pp.

Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A. (2013) "Shear assessment of reinforced concrete slab bridges" International IABSE Conference, Assessment, Upgrading and Refurbishment of Structures, Rotterdam, The Netherlands, pp. 76 - 77.

Lantsoght, E.O.L., van der Veen, C., Walraven, J. (2013) " Concrete Slabs under a Combination of Loads in Shear" International IABSE Conference, Assessment, Upgrading and Refurbishment of Structures, Rotterdam, The Netherlands, pp. 526-527

Lantsoght, E.O.L., van der Veen, C., Walraven, J. (2013) "Prolonging the service life of existing reinforced concrete slab bridges through experimental studies on the shear capacity" First International Conference on Concrete Sustainability, ICCS 2013, Tokyo, Japan, pp.1052-1059

Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A. (2013) "Quick Scan Method - Dutch approach for the shear assessment of Reinforced Concrete Slab bridges" 30th International Bridge Conference, Pittsburgh, USA, 8 pp.

Lantsoght, E.O.L., de Boer, A., van der Veen, C., Walraven, J. (2013) " Peak shear stress distribution in finite element models of concrete slabs", SEMC 2013, the Fifth International Conference on Structural Engineering, Mechanics and Computation, Cape Town, South Africa, pp. 475 - 480

Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A. (2013). "Applying Experimental Results to the Shear Assessment Method for Solid Slab Bridges" Concrete 2013, Gold Coast, Australia, 10 pp.

Lantsoght, E.O.L., de Boer, A., van der Veen, C., Walraven, J., (2014). "Effective Width in Shear of Reinforced Concrete Solid Slab Bridges under Wheel Loads" TRB 2014 Washington DC, 15 pp.

Lantsoght, E.O.L., van der Veen, C., Walraven, J., de Boer, A. (2014). “Recommendations for the Shear Assessment of Reinforced Concrete Solid Slab Bridges” IABMAS 2014, Shanghai, China.

Lantsoght, E.O.L., de Boer, A., van der Veen, C. (2014). “Determination of distribution width for shear stresses at support in reinforced concrete slab bridges", Euro-C 2014, Computational Modelling of Concrete and Concrete Structures, St. Anton am Alberg, Austria, pp. 927-936.

Lantsoght, E.O.L., van der Veen, C., de Boer, A. (2014). “Predicting the shear capacity of reinforced concrete slabs subjected to concentrated loads close to supports with the Modified Bond Model", IABSE 2014, Engineering for Progress, Nature and People, Madrid, Spain.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2014). “Practical application of transverse load redistribution in reinforced concrete solid slabs", SMSB 2014, 9^th International Conference on Short and Medium Span Bridges, Calgary, Canada, XX pp. (in press)

Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2015). “Reliability-based expression for the shear capacity of reinforced concrete slabs under concentrated loads close to supports”, ESREL 2015, (in review)

Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2015). “Modified Bond Model for shear in slabs under concentrated loads”, fib 2015, Copenhagen, Denmark, 8 pp.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2015). “Development of improved expression for the fatigue strength of concrete under compression”, Concrete Repair, Rehabilitation and Retrofitting IV, ICCRRR 2015, Leipzig, Germany, 8 pp.

Flores Valverde, K., Lantsoght, E.O.L. (2016). “Analysis of structural condition and proposed maintenance for the bridge over the Tambura ravine”, IABMAS 2016, Foz de Iguacu, Brasil

Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2016). “Shear and Moment Capacity of the Ruytenschildt Bridge”, IABMAS 2016, Foz de Iguacu, Brasil

Lantsoght, E.O.L., van der Veen, C., de Boer, A., (2016). “Shear Capacity of the Ruytenschildt Bridge”, fib 2016, Cape Town, South Africa

Koekkoek, R.T., Lantsoght, E.O.L., Yang, Y., de Boer, A., Hordijk, D.A. (2016). “Defining loading criteria for proof loading of existing reinforced concrete bridges”, fib 2016, Cape Town, South Africa

Lantsoght, E.O.L., Yang, Y., Tersteeg, R.H.D., van der Veen, C., de Boer, A. (2016). “Development of Stop Criteria for proof loading”, IALCCE 2016, Delft, The Netherlands.

Lantsoght, E.O.L., de Boer, A., van der Veen, C., (2016). “Modelling of symmetrically and asymmetrically loaded reinforced concrete slabs”, SEMC 2016, Cape Town, South Africa

C. Mejia, E.O.L. Lantsoght (2016). “Strain and deflection analysis in plain concrete beams and reinforced concrete beams by applying Digital Image Correlations”, SEMC 2016, Cape Town, South Africa

D. Valdivieso, E.O.L. Lantsoght, T.A. Sanchez (2016). “Study of the effect of torsion in slabs”, SEMC 2016, Cape Town, South Africa

Lantsoght, E.O.L. (2017). “Pruebas de carga en puentes de hormigon armado: experiencias de un program de pruebas en Holanda”, 1er Congreso Iberamericano de Ingenieria Civil, Quito, Ecuador.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Proof load testing of viaduct de Beek”, IABSE 2017, Vancouver, Canada.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Recommendations for proof load testing of reinforced concrete slab bridges”, IABSE 2017, Vancouver, Canada.

Lantsoght, E.O.L., van der Veen, C., Hordijk, D.A., de Boer, A. (2017). “Reliability index after proof load testing: viaduct de Beek”, ESREL 2017, Slovenia

Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Determination of loading protocol and stop criteria for proof loading with beam tests”, fib symposium 2017, Maastricht, the Netherlands.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Extended Strip Model for slabs subjected to a combination of loads”, fib symposium 2017, Maastricht, the Netherlands.

Lantsoght, E.O.L., van der Veen, C., de Boer, A., Hordijk, D.A. (2017). “Proof load testing of reinforced concrete slab bridges in the Netherlands”, TRB Annual Compendium of papers 2017, Washington DC.

Alexander, S.D.B., Lantsoght E.O.L. (2018). “Modelling Concrete Loads Using an Arched Strut”, SMSB 2018, Quebec City, Canada.

Lantsoght, E.O.L., Yang, Y., van der Veen, C., Hordijk D.A. (2018). “Stop criteria for proof load tests verified with field and laboratory testing of the Ruytenschildt Bridge” IABSE Conference 2018 – Engineering the Past, to Meet the Needs of the Future, Copenhagen, Denmark.

Rodriguez, A., Lantsoght, E.O.L. (2018). “Verification of flexural stop criteria for proof load test son concrete bridges.” IALCCE 2018, Gent, Belgium.

Paredes, J.E., Lantsoght, E.O.L. (2018). “Non-linear finite element analysis of reinforced concrete beams with plain reinforcement for stop criteria.” IALCCE 2018, Gent, Belgium.

Benitez, K., Lantsoght, E.O.L., Yang, Y. (2018). “Development of a stop criterion for load tests based on the Critical Shear Displacement Theory.” IALCCE 2018, Gent, Belgium

Lantsoght, E.O.L., Van der Veen, C., Hordijk, D.A. (2018) “Proposed stop criteria for proof load testing of concrete bridges and verification”, IALCCE 2018, Gent, Belgium

Ensink, S., Lantsoght, E.O.L., van der Veen, C., Hordijk, D.A., van der Ham, H., de Boer, A., (2018), “Experimental full-size field test of capacity of old prestressed concrete girder bridge”, European Bridge Conference 2018, Edingburgh, UK.

Lantsoght, E.O.L., van der Veen, C., van der Ham, H., de Boer, A. (2018). “Twenty years monitoring of a high strength concrete cantilever bridge”, IABMAS 2018, Melbourne, Australia.

Lantsoght, E.O.L., van der Veen, C., Hordijk, D.A. (2018). “Monitoring crack width and strain during proof load testing”, IABMAS 2018, Melbourne, Australia.

Lantsoght, E.O.L., de Boer, A., van der Veen, C., Hordijk, D.A. (2018). “Modelling of the proof load test on viaduct De Beek”, Euro-C 2018, Bad Hofgastein, Austria.

Yang, Y., Zarate Garnica, G.I., Lantsoght, E.O.L., Hordijk, D.A. (2018). “Calibration of the shear stop criteria based on crack kinematics of reinforced concrete beams without shear reinforcement,” fib 2018, Melbourne, Australia.

Alexander, S.D.B., Lantsoght E.O.L. (2018). “The Arched Strut – A Tool for Modelling Column-Slab Connections”, 40th IABSE Symposium Tomorrow’s Megastructures, Nantes, France.

Presentaciones Técnicas

E.O.L. Lantsoght. (2009) "Shear in reinforced concrete slabs - Shear capacity near simple and continuous supports," 11th Symposium of the Research School Integral Design of Structures, Noordwijkerhout, The Netherlands.

E.O.L. Lantsoght. (2010) "Shear in reinforced concrete slabs - Concentrated loads close to supports," PhD lunchmeeting, Delft University of Technology.

E.O.L. Lantsoght. (2010) "Afschuiving in betonnen platen met puntlast nabij oplegging - Bespreking eerste testen," Progress meeting, Delft University of Technology.

E.O.L. Lantsoght. (2010) "Shear in reinforced concrete slabs - wheel loads close to support," 12th Symposium of the Research School Integral Design of Structures, Zeist, The Netherlands.

E.O.L. Lantsoght. (2010), "Afschuiving in betonnen platen - met puntlast nabij oplegging," 78th Stufib meeting, Delft, Países Bajos.

E.O.L. Lantsoght. (2011) "Afschuiving in betonnen platen - experimenteel onderzoek." Beëdigingsbijeenkomst Constructeursregister, Delft, Países Bajos.

E.O.L. Lantsoght. (2011) "Shear capacity of slabs and slab strips loaded close to the support", ACI Fall Convention, Cincinnati, USA.

E.O.L. Lantsoght. (2012) "Shear capacity of solid slab bridges - Recommendations based on experiments," fib committee SAG 7, Delft, Países Bajos.

E.O.L. Lantsoght. (2012). "Afschuifdraagvermogen van gewapende plaatconstructies zonder schuifwapening," Studiedag: Het nieuwe dwarskrachtrekenen aan bestaande betonnen kunstwerken, Rotterdam, Países Bajos.

E.O.L Lantsoght. (2012) "Bestaande betonnen bruggen - onderzoek naar restdraagvermogen," 3TU Bouw symposium, Eindhoven, Países Bajos.

E.O.L Lantsoght. (2012) "Shear capacity of slabs and slab strips - experimental results," PhD lunchmeeting, Delft University of Technology.

E.O.L Lantsoght. (2012) "Quick Scan platen - Achtergrondrapport en MathCad sheet" Progress meeting, Delft University of Technology.

E.O.L Lantsoght. (2012) "Afschuifdraagvermogen van platen - plaatbruggen onder verkeersbelasting," meeting, Delft University of Technology.

E.O.L Lantsoght. (2012) "Afschuifdraagvermogen van platen - plaatbruggen onder verkeersbelasting," meeting, Rijkswaterstaat, Utrecht, The Netherlands.

E.O.L Lantsoght. (2012) "Superposition of loading - Results of Experiments," Progress meeting for International Advisory Board, Schiphol.

E.O.L Lantsoght. (2012) "Quick Scans of Solid Slab Bridges," Progress meeting for International Advisory Board, Schiphol.

E.O.L Lantsoght. (2012) "Superpositie van belastingen - Experimentele resultaten," meeting, Delft University of Technology.

E.O.L Lantsoght. (2012) "Shear Capacity of Existing Reinforced Concrete Slab Bridges under Traffic Loads," International Bridge Conference, Pittsburgh, USA.

E.O.L Lantsoght. (2013) "Shear in Reinforced Concrete Slabs under Concentrated Loads close to Supports", Introduction presentation at doctoral defense, Delft University of Technology, The Netherlands.

E.O.L. Lantsoght. (2013) "Shear in Reinforced Concrete Slabs under Concentrated Loads close to Supports", lecture for research group Mechanics of Materials and Structures, Vrije Universiteit Brussel, Brussels, Belgica.

E.O.L. Lantsoght. (2014) “Vermoeiing van beton onder druk – Literatuuronderzoek & voorstel,” Infraquest, Delft, The Netherlands.

E.O.L. Lantsoght. (2015) “Testing to failure of the Ruytenschildt Bridge: Comparison between predicted capacity and test results”, ACI Spring Convention, Kansas City, MO, USA, April 2015.

E.O.L. Lantsoght. (2015) “Extending the service life of existing bridges,” I Congreso y Expo de Diseño y Construcción de Estructuras Metálicas y Hormigón, ESPOL, Guayaquil, Ecuador.

E.O.L. Lantsoght. (2015) “Extender la vida útil de puentes existentes,” Seminario Internacional – Avances Recientes en Ingenieria Estructural, Quito, Ecuador.

E.O.L. Lantsoght. (2015) “Testing to Failure of the Ruytenschildt Bridge – Analysis of the Ultimate Limit State Results.”, Seminario de Investigacion USFQ, Quito, Ecuador.

E.O.L. Lantsoght. (2015) “Modified Bond Model for shear in slabs under concentrated loads,” fib symposium 2015, Copenhagen, Denmark.

E.O.L. Lantsoght. (2015) “Improved formulation for compressive fatigue strength of concrete,” ICCRRR 2015, Leipzig, Germany.

E.O.L. Lantsoght. (2015) “Proof loading of existing reinforced concrete bridges in The Netherlands,” ACI Fall Convention, Committee 342: Evaluation of Concrete Bridges and Bridge Elements, Denver, CO, US.

E.O.L. Lantsoght. (2015) “Proof loading of existing bridges – Recent developments in The Netherlands,” IV Jornadas de Ingenieria Civil, Escuela Politecnica Nacional, Quito, Ecuador.

E.O.L. Lantsoght (2016) “Development of a guideline for load testing in the Netherlands,” ACI Spring Convention, Research in Progress, Milwaukee, WI, USA.

E.O.L. Lantsoght (2016) “Defining loading criteria for proof loading of existing reinforced concrete bridges”, fib symposium, Cape Town, South Africa, November 2016.

E.O.L. Lantsoght (2016) “Shear capacity of the Ruytenschildt Bridge”, fib symposium, Cape Town, South Africa, November 2016.

E.O.L. Lantsoght (2016) “Development of stop criteria for proof loading”, IALCCE Symposium, Delft, the Netherlands, October 2016.

E.O.L. Lantsoght (2016) “Bridging the gap between one-way and two-way shear in slabs,” ACI-fib punching symposium, Philadelphia, PA, USA, October 2016

E.O.L. Lantsoght (2016) “Load testing of reinforced concrete bridges in the Netherlands,” MeMC, Vrije Universiteit Brussel, Brussels, Belgium, October 2016.

E.O.L. Lantsoght (2016) “Afschuifcapaciteit van betonnen plaatbruggen – Plaatproeven en Quick Scan,” TU Delft, June 2016.

E.O.L. Lantsoght (2017) “Proof load testing in the Netherlands,” ACI Spring Convention 2017, Committee 437: Strength Evaluation of Existing Concrete Structures, Detroit, MI, USA, March 2017

E.O.L. Lantsoght (2017) “Pruebas de carga en puentes de hormigon armado: experiencias de un programa de pruebas en Holanda,” 1er congreso Iberamericano de Ingenieria Civil, 2017, Quito, Ecuador.

E.O.L. Lantsoght (2017) “Assessment of slab bridges through proof loading in the Netherlands”, ACI Fall Convention 2017, Anaheim, CA.

E.O.L. Lantsoght (2017) “On the way to the development of a shear stop criterion with Acoustic Emission measurement”, ACI Fall Convention 2017, Anaheim, CA.

E.O.L. Lantsoght (2017) “Determination of loading protocol and stop criteria for proof loading with beam tests”, fib symposium 2017, Maastricht, the Netherlands.

E.O.L. Lantsoght (2017) “Extended Strip Model for slabs subjected to a combination of loads”, fib symposium 2017, Maastricht, the Netherlands.

E.O.L. Lantsoght (2017) “Proof load testing of reinforced concrete slab bridges in the Netherlands”, TRB Annual Meeting, January 2017.

E.O.L. Lantsoght (2017) “Pruebas de carga en puentes de hormigon armado: experiencias de un programa de pruebas en Holanda,” 1er congreso Iberamericano de Ingenieria Civil, October 2017, Quito, Ecuador.

E.O.L. Lantsoght (2017) “Assessment of slab bridges through proof loading in the Netherlands”, ACI Fall Convention 2017, Anaheim, CA.

E.O.L. Lantsoght, on behalf of Y. Yang (2017) “On the way to the development of a shear stop criterion with Acoustic Emission measurement”, ACI Fall Convention 2017, Anaheim, CA.

E.O.L. Lantsoght (2018) “Proof load testing of the viaduct De Beek,” IABSE Belgium and the Netherlands event, Breda, the Netherlands, May 2018.

E.O.L. Lantsoght (2018) “Load testing of structures” Paper presentations – Load testing of structures, ACI USFQ Student Chapter, Quito, Ecuador, October 2018.

Presentaciones

E.O.L. Lantsoght. (2012) "Fifty Shades of Concrete" TEDx Delft Salon, Delft, The Netherlands.

E.O.L. Lantsoght. (2014) “El cemento y el hormigon, los materiales mas usados del mundo luego del agua”, USFQ, Quito, Ecuador.

E.O.L. Lantsoght. (2014) “Civil Engineering”, Seminario de Ciencias y Ingenieria, USFQ, Quito, Ecuador.

E.O.L. Lantsoght. (2015) “Sound applications in engineering,” Charlas de Medicina – El Viaje del Sonido, Quito, Ecuador.

E.O.L. Lantsoght. (2015) “Civil Engineering”, Seminario de Ciencias y Ingenieria, USFQ, Quito, Ecuador.

E.O.L. Lantsoght. (2015) “The road to breaking bridges and stereotypes,” Foro II, Women in Science and Engineering, Universidad San Francisco de Quito, Quito, Ecuador.

E.O.L. Lantsoght. (2016) “Sound applications in engineering,” Coloquio del Politecnico, Quito, Ecuador.

E.O.L. Lantsoght. (2016) “The adventures of a concrete researcher – or how I ended up breaking bridges for a living” ACI Student Chapter USFQ, Quito, Ecuador, October 2016

E.O.L. Lantsoght. (2018) “Sound applications in engineering,” Coloquio del Politecnico, March 2018, Quito, Ecuador.

Posters

E.O.L. Lantsoght. (2012) "Shear Capacity of Existing Reinforced Concrete Slab Bridges under Traffic Loads," International Bridge Conference, Pittsburgh, USA, June 2012.

E.O.L. Lantsoght. (2017) “Recommendations for proof load testing of reinforced concrete slab bridges”. IABSE 2017, Vancouver, CA.

E.O.L. Lantsoght. (2017) “Beam experiments to investigate loading protocol and stop criteria for load testing”, ACI Spring Convention 2017, ACI 123 poster session Research in Progress, Detroit, MI, USA.

Participación en Comités Técnicos y Servicio a la profesión

· Miembro del Comité Técnico TRB AFF 30: Concrete Bridges del Transportation Research Board

· Secretario del Comité Técnico TRB AFF 40: Testing and Evaluation of Transportation Structures del Transportation Research Board

· Vice president del Comité Técnico ACI 445-E: Torsion del American Concrete Institute

· Miembro del Comité Técnico ACI-DAfStB 445-D: Shear Databases del American Concrete Institute y Deutscher Ausschuß für Stahlbeton

· Miembro del Comité Tecnico ACI 342: Evaluation of Concrete Bridges and Concrete Bridge Elements of the American Concrete Institute

· Miembro del Comite Tecnico ASCE-ACI 421: Design of Reinforced Concrete Slabs of the American Concrete Institute and the American Society of Civil Engineers

· Miembro del Comite Tecnico ASCE-ACI 445: Shear and Torsion of the American Concrete Institute and the American Society of Civil Engineers

· Miembro del Comite Tecnico ACI 437: Strength Evaluation of Existing Concrete Structures of the American Concrete Institute

· Miembro del Advisory Group – Full scale testing of Concrete Bridges of Vejdirektoratet Denmark

· Guest associate editor for Frontiers in Built Environment – Bridge Engineering Research Topic Diagnostic and Proof Loading Tests on Bridges

· Editor of Special Issue “Advanced Structural Concrete Materials in Bridges” for the journal Materials

· Editor academico de PLOS One

· Editor en jefe de ACI Avances en Ciencias e Ingenierías

· Miembro del equipo editorial de Structural Engineering International¸ Revista tecnica de IABSE, International Association of Bridge and Structural Engineering

· Revisor para Structural Engineering International, revista tecnica de IABSE, International Association of Bridge and Structural Engineering

· Revisor para Transportation Research Records, revista del Transportation Research Board.

· Revisor para Bridge Engineering, revista del Institution of Civil Engineers.

· Revisor para American Concrete Insitute – Special Publications

· Revisor para International Journal of Heritage Architecture: Studies, Repairs and Maintenance

· Revisor para Construction & Building Materials

· Revisor para Civil Engineering Infrastructures Journal (University of Tehran)

· Revisor para Structural Concrete, technical journal of fib, the international concrete federation

· Revisor para Structure and Infrastructure Engineering

· Revisor para Revista Politecnica, the journal of the Escuela Politecnica Nacional (Quito, Ecuador)

· Revisor para Sensors

· Revisor para Structures, the journal of the Institution of Structural Engineers

· Revisor para Engineering Fracture Mechanics

· Revisor para Nuclear Engineering and Design

· Revisor para KSCE Journal of Civil Engineering

· Revisor para the Journal of Earthquake Engineering

· Revisor para PLOS One

· Revisor para Multidiscipline Modeling in Materials and Structures

· Revisor para ACI Avances en Ciencias e Ingenierías

· Revisor para Journal of Materials in Civil Engineering (ASCE)

· Revisor para Engineering Structures

· Revisor para Journal of Bridge Engineering (ASCE)

· Revisor para Journal of Visual Languages and Computing

· Revisor para Materials

· Revisor para Infrastructures

· Revisor para Applied Sciences

· Revisor para Fibers

· Revisor para Sustainability

· Revisor para Buildings

· Revisor para Frontiers of Structural and Civil Engineering

· Revisor para ACI Structural Journal, journal of the American Concrete Institute

· Revisor para Journal of Structural Integrity and Maintenance, journal of the Korea Institute for Structural Maintenance and Inspection

· Revisor para European Journal of Environmental and Civil Engineering

· Revisor para Advances in Civil Engineering Materials

· Revisor para Symmetry

· Revisor para IEEE Access

· Revisor para Computers and Structures

· Revisor para International Journal of Fatigue

· Revisor para Engineering Computations

· Revisor para Case Studies in Construction Materials

· Revisor para Journal of Engineering – University of Baghad

· Revisor para Journal of Engineering Research

· Revisor para International Journal for Numerical Methods in Engineering

· Revisor para Scientia Iranica

· Revisor para Structural Control and Health Monitoring

· Revisor para Ciencia de la Universidad Estatal de Milagro

· Revisor para International Journal of Concrete Structures and Materials

· Revisor para Materials and Structures

· Revisor para Journal of Structural Engineering – ASCE

· Revisor para Accountability in Research

· Revisor para Journal of Computational Design and Engineering

· Miembro del Commite Scientifico de IABSE 2017, Vancouver – conference of the International Association for Bridge and Structural Engineering.

· Miembro del Commite Scientifico de IABMAS 2018, Melbourne – conference of the International Associations for Bridge Maintenance and Safety.

· Miembro del Commite Scientifico de SHMII-17, Brisbane – Structural Health Monitoring of Intelligent Infrastructure Conference 2017.

· Miembro del Commite Scientifico de AMCM, 10th International Conference on Advanced Models and New Concepts in Concrete and Masonry Structures Lublin University of Technology, Lublin, Poland

· Organizador de Mini Symposium MS10: Assessment of structural capacity by proof loading, IALCCE 2016, Delft, the Netherlands

· Organizador de Mini Symposium MS1: Load Testing of New and Existing Structures, IALCCE 2018, Ghent, Belgium

· Organizador de Special Session SS18: Bridge Monitoring: techniques and results regarding bridge condition and loading, IABMAS 2018, Melbourne, Australia.

· Organizador de ACI Fall Convention 2017 Session “Evaluation of Concrete Bridge Behaviour through Load Testing - International Perspective”, Anaheim, CA, USA

· Organizador de Mini Symposium: Field Testing of Bridges at BEI 2019, Honolulu, Hawaii

· Organizador del Special Session SS18: “Monitoring techniques and their interpretation for the integrity assessment of bridges”

· Organizer of Special Session: “Towards extending the service life of existing concrete infrastructure through advanced assessment methods” IABSE 2021

· Editor de ACI Special Publication “Evaluation of Concrete Bridge Behaviour through Load Testing - International Perspective”

· Editor de ACI Special Publication “Examples for the design of reinforced and prestressed concrete members under torsion”

· Miembro de IABMAS, the International Association for Bridge Maintenance and Safety.

· Miembro de IALCCE, the International Association for Life-Cycle Civil Engineering.

· Miembro de ACI, the American Concrete Institute.

· Miembro de ASCE, the American Society of Civil Engineers.

· Miembro de IABSE, the International Association for Bridge and Structural Engineering.

· Miembro de fib, the International Concrete Federation.

· Miembro de BEI, Bridge Engineering Institute

· Miembro del comité de selección para la beca WISE (Women in Science and Engineering) de Universidad San Francisco de Quito 2018 y 2019

· Miembro del comité de selección para las becase Fulbright de Belgica, 2019

· Co-supervisor of Christian Overgaard Christensen at Danish University of Technology

Fondos de Investigacion como Investigador Principal

· Chancellor Grant 2015 – 3500 USD. Project: Desarrollo del Modified Bond Model para losas de hormigón estructural

· Chancellor Grant 2016 – 3000 USD. Project: Development of Stop Criteria for Proof Load Tests.

· PoliGrant 2017 – 4000 USD. Project: Shear Capacity of Steel Fiber Reinforced Concrete.

· PoliGrant 2018 – 10000 USD. Project: Crack kinematics of shear in steel fiber reinforced concrete.

· Collaboration Grant 2018 – 2019 – 5000 USD. Project: Data-driven Design of Concrete Structures. With Miguel Abambres.