33. Xinming Yan, Shaojie Gu, Sungmin Yoon, Yasuhiro Kimura, Daisuke Kobayashi, Yang Ju, Yuhki Toku, Restoring Plasticity in Nickel-Based Superalloy Using High-Density Pulsed Electric Current, Advanced Engineering Materials, (2024). https://doi.org/10.1002/adem.202401409
32. Xinming YAN, Sungmin YOON, Shaojie GU, Yasuhiro KIMURA, Daisuke KOBAYASHI, Yang JU, Yuhki TOKU, Elevating fatigue life in nickel-based superalloys through suppression of persistent slip bands/markings via high-density pulsed electric current treatment, JSME Mechanical Engineering Journal, (2024). https://doi.org/10.1299/mej.24-00178
31. Sungmin Yoon, Yasuhiro Kimura, Yang Ju, Yuhki Toku, Fatigue damage recovery and enhanced fatigue limit of austenitic stainless steel using multiple high-density pulsed electric currents, International Journal of Pressure Vessels and Piping, (2024). https://doi.org/10.1016/j.ijpvp.2024.105178
30. Md Sultan Mahmud, Shaojie Gu, Sungmin Yoon, Yasuhiro Kimura, Yuhki Toku, Yang Ju, Titanium-coated high-density Fe2O3 single crystal nanowire array for solar water splitting, Materials Express, (2024). https://doi.org/10.1166/mex.2024.2704
29. Yu Xiaoming, Gu Shaojie, Yoon Sungmin, Kimura Yasuhiro, Toku Yuhki & Ju Yang, Annealing Effect of High-Density Pulsed Electric Current Treatment on Cold-Rolled 6061 Aluminum Alloy, Journal of Materials Engineering and Performance, (2024). https://doi.org/10.1007/s11665-023-08522-z
28. Sungmin Yoon, Yasuhiro Kimura, Motoki Uchida, Yang Ju, Yuhki Toku, High Temperature Tensile and Compressive Behaviors of Nanostructured Polycrystalline AlCoCrFeNi High Entropy Alloy: A Molecular Dynamics Study, ASME Journal of Engineering Materials and Technology, (2024). https://doi.org/10.1115/1.4063802
27. Shaojie Gu, Chang Liu, Yuhki Toku, Yasuhiro Kimura, Sungmin Yoon, Shaoli Li, Yi Cui, Yang Ju, Ultrahigh deformability of Ti-6Al-4V assisted by high-density pulsed electric current treatment, Journal of Alloys and Compounds, (2024). https://doi.org/10.1016/j.jallcom.2023.172892
26. Seulgee Lee, Chayanaphat Chokradjaroen, Yasuyuki Sawada, Sungmin Yoon, Nagahiro Saito, Regulated Phase Separation in Al–Ti–Cu–Co Alloys through Spark Plasma Sintering Process, materials, (2024). https://doi.org/10.3390/ma17020304
25. Yi CUI, Ichiro TAKEUCHI, Wenzhi YANG, Shaojie GU, Sungmin YOON, Toshiro MATSUMOTO, Artificial neural network to predict the structural compliance of irregular geometries considering volume constraints, JSME Mechanical Engineering Journal, (2024). https://doi.org/10.1299/mej.24-00002
24. Sungmin YOON, Masato MORII, Yasuhiro KIMURA, Yuhki TOKU, Suppressing fatigue crack growth owing to welded joints of duplex stainless steel subjected to multiple high-density pulsed electric currents, JSME Mechanical Engineering Journal, (2024). https://doi.org/10.1299/mej.24-00015
23. Sungmin YOON, Yasuhiro KIMURA, Yuhki TOKU, Molecular dynamics study of nanostructured polycrystalline CoCrCuFeNi high entropy alloy concerning temperature dependence of deformation-induced phase transformation, JSME Mechanical Engineering Journal, (2024). https://doi.org/10.1299/mej.23-00551
22. Sungmin Yoon, Yasuhiro Kimura, Yuhki Toku, Yang Ju, Overcoming the trade-off between strength and ductility in austenitic stainless steel using a high-density pulsed electric current, Materialia, (2023). https://doi.org/10.1016/j.mtla.2023.101922
21. Yi CUI, Sungmin YOON, Shaojie GUI, Toru TAKAHASHI, Toshiro MATSUMOTO, A generalized exact volume constraint method for the topology optimization based on the nonlinear reaction-diffusion equation, Transactions of the Japan Society for Computational Methods in Engineering, (2023). https://doi.org/10.60443/jascome.23.0_81
20. Shaojie Gu, Chang Liu, Yasuhiro Kimura, Sungmin Yoon, Yi Cui, Xinming Yan, Yang Ju, Yuhki Toku, Realizing strength–ductility synergy in a lean duplex stainless steel through enhanced TRIP effect via pulsed electric current treatment, Materials Science and Engineering: A, (2023). https://doi.org/10.1016/j.msea.2023.145534
19. Jaewoong Jung, Shaojie Gu, Sungmin Yoon, Yasuhiro Kimura, Yuhki Toku & Yang Ju, Effect of high-density pulsed electric current on the formability of aluminum alloy, The International Journal of Advanced Manufacturing Technology, (2023). https://doi.org/10.1007/s00170-023-11841-z
18. Sungmin Yoon, Yasuhiro Kimura, Shaojie Gu, Yuhki Toku, Yang Ju, Yi Cui, Thermal stress-assisted formation of submicron pillars from a thin film of CoCrCuFeNi high entropy alloy: experiments and simulations, RSC Advances, (2023). https://doi.org/10.1039/D3RA04759H
17. Chang Liu, Shaojie Gu, Xinming Yan, Sungmin Yoon, Yasuhiro Kimura, Yuhki Toku, Yang Ju, Rapid microstructure modification of laser powder-bed fused superalloy IN718 using high-density pulsed electric current, Materials today Communications, (2023). https://doi.org/10.1016/j.mtcomm.2023.106892
16. Jaewoong Jung, Sungmin Yoon, Shaojie Gu, Yasuhiro Kimura, Yuhki Toku, Yang Ju, Influence of a high-density pulsed electric current on the fatigue behaviour of prestrained aluminium alloys, Engineering Failure Analysis, (2023). https://doi.org/10.1016/j.engfailanal.2023.107230
15. Sungmin Yoon, Shaojie Gu, Shaoli Li, Yasuhiro Kimura, Yuhki Toku, Yang Ju, Efficiency improvement of fatigue crack healing by multiple high-density pulsed electric currents: Application to austenitic stainless steel, Engineering Fracture Mechanics, (2023). https://doi.org/10.1016/j.engfracmech.2023.109235
14. Shaoli Li, Shaojie Gu, Sungmin Yoon, Yasuhiro Kimura, Yuhki Toku, Bin Liu, Yang Ju, Effect of high-density pulsed electric current on residual stress relief and microstructural modification of cold-bent commercially pure titanium, Materials today Communications, (2023). https://doi.org/10.1016/j.mtcomm.2023.107082
13. Chang Liu, Shaojie Gu, Xinming Yan, Sungmin Yoon, Yasuhiro Kimura, Yuhki Toku, Yang Ju, Rapid Microstructure Modification of Additively Manufactured Ni-Based Superalloy Using High-Density Pulsed Electric Current, Available at SSRN, (2023). http://dx.doi.org/10.2139/ssrn.4434853
12. Sungmin Yoon, Yi Cui, Yasuhiro Kimura, Shaojie Gu, Yuhki Toku, Yang ju, Improvement of low-cycle fatigue life of austenitic stainless steel by multiple high-density pulsed electric currents, International Journal of Fatigue, (2022). https://doi.org/10.1016/j.ijfatigue.2021.106639
11. Shaojie Gu, Yi Cui, Sungmin Yoon, Zizheng Wang, Yasuhiro Kimura, Yuhki Toku, Yang Ju, Rapid anisotropy recovery in deformed FCC metals by high-density pulsed electric current treatment, Vacuum, (2022). https://doi.org/10.1016/j.vacuum.2021.110855
10. Sungmin Yoon, Yasuhiro Kimura, Yi Cui, Yuhki Toku, Yang Ju, Evaluation of Electric Current-Induced Improvement of Fracture Characteristics in SUS316, MATERIALS TRANSACTIONS, (2021). https://doi.org/10.2320/matertrans.MT-M2020333
9. Soo-Jeong Park, Sung-Min Yoon, and Yun-Hae Kim, Chapter 1: Performance-Based Optimal Design of Multi-Layered Hybrid Composites with Halloysite Nanoparticles, Advanced Composites Engineering and Its Nano-Bridging Technology, (2021). https://doi.org/10.1142/9789811235320_0002
8. Sungmin YOON, Yasuhiro KIMURA, Yuhki TOKU, Yang JU, Soojeong PARK, Yunhae KIM, Assessment of creep behavior using a damage-coupled model for martensitic stainless steel, JSME Mechanical Engineering Journal, (2021). https://doi.org/10.1299/mej.21-00178
7. Sung-Min Yoon, Sung-Youl Bae, and Yun-Hae Kim, Computational study on interfacial peeling by uniformly distributed loading on aluminum hybrid anti-mechanical vibration panel, Modern Physics Letters B, (2020). https://doi.org/10.1142/S0217984920400436
6. Sung-Youl Bae, Sung-Min Yoon, and Yun-Hae Kim, A study on the lightweight design of lift structure by composite materials, Modern Physics Letters B, (2020). https://doi.org/10.1142/S0217984920400321
4. Sung-Min Yoon and Yun-Hae Kim, Prediction of healing efficiency of carbon-based nanocomposites under modified environment, International Journal of Modern Physics B, (2018). https://doi.org/10.1142/S0217979218400519
3. Kim Ki-Su, Shin Choon-Sik, Yoon Sung-Min, Park Chang-Kyu, Kang Kyeong-Hoon, Influence of Projectile Surface Defects on the Trajectory, KSPE, (2011). https://koreascience.kr/article/CFKO201132164220194.page
2. Chang-Min Suh, Sung-Min Yoon, Ju-Ho Jang, Min-Soo Suh, Young-Sik Pyoun, Tatsuo Sakai, Very high cycle fatigue characteristics of SCM435 under load variation by ultrasonic nanocrystal surface modification treatment, KSME 2009 proceeding, (2009). https://www.dbpia.co.kr/journal/articleDetail?nodeId=NODE01291549
Yang Ju, Shaojie Gu, Sungmin Yoon, Yasuhiro Kimura, Yuhki Toku, RAPID TEXTURE ALLEVIATION AND GRAIN REFINEMENT OF NiBASED SUPERALLOY IN718 INDUCED BY HIGH-DENSITY PULSED ELECTRIC CURRENT, ICEM20, (2023). https://www.up.pt/arquivoweb/paginas.fe.up.pt/_icem20/proceedings_icem20/data/papers/20128.pdf