Publications

Dry Laser‐Induced Graphene Fractal‐like ECG Electrodes (Advanced Electronic Materials, 2024)

Responsible Humidity Sensor by Direct Laser Writing on Cork Substrate (Advanced Sustainable Systems, 2024)

 The Role of Interdigitated Electrodes in Printed and Flexible Electronics  (Sensors, 2024)

Simple fabrication of laser-induced graphene functionalized with a copper-based metal–organic framework and its application in solid-state supercapacitors (Journal of Materials Chemistry C, 2024)

Graphene-enabled Wearable for Remote ECG and Body Temperature Monitoring  (IEEE Journal on Flexible Electronics, 2024)

Near-Field Communication Tag for Colorimetric Glutathione Determination with a Paper-Based Microfluidic Device (Biosensors, 2023)

Demonstration of bare laser-reduced Graphene Oxide sensors for Ammonia and Ethanol (IEEE Sensors Journal, 2023)

Comparison of printing techniques for the fabrication of flexible carbon nanotube-based ammonia chemiresistive gas sensors (Flexible and Printed Electronics, 2023)

Laser-synthesis of conductive carbon-based materials from two flexible commercial substrates: A comparison (Applied Surface Science, 2023)

Selectivity of Relative Humidity Using a CP Based on S-Block Metal Ions (Sensors, 2022)

Laser-Induced Graphene Electrodes Modified with a Molecularly Imprinted Polymer for Detection of Tetracycline in Milk and Meat (Sensors, 2022)

Portable Electronic system for fast detection of bacteria lactase fermentation in water samples (Sensors and Actuators A: Physical, 2022)

Reconfigurable Electronic Platforms: A Top-Down Approach to Learn about Design and Integration of Electronic Systems (Micromachines, 2022)

Paper and salt: biodegradable NaCl-based humidity sensors for sustainable electronics (Frontiers in Electronics, 2022)

Laser-Induced Graphene, Fused Filament Fabrication, and Aerosol Jet Printing for Realizing Conductive Elements of UHF RFID Antennas (IEEE Journal of Radio Frequency Identification, 2022)

Screen-printed capacitive pressure sensors with high sensitivity and accuracy on flexible substrates (Flexible and Printed Electronics, 2022)

A versatile wearable based on reconfigurable hardware for biomedical measurements (Measurement, 2022)

Optimization of a Handwriting Method by an Automated Ink Pen for Cost-Effective and Sustainable Sensors  (Chemosensors, 2021)

Facile manufacturing of sub-mm thick CNT-based RC filters (Materials Letters, 2021)

Cellulose nanofibers as substrate for flexible and biodegradable moisture sensors (Composites Science and Technology, 2021)

Fabrication of low cost and low impact RH and temperature sensors for the internet of environmental-friendly things (Materials Science and Engineering: B, 2021)

Properties of silver chloride and carbon screen printed patterns on different textiles (Textile Research Journal, 2021)

Carbon Dots as Sensing Layer for Printed Humidity and Temperature Sensors (Nanomaterials, 2020)

Dual-Band Store-and-Use System for RF Energy Harvesting with Off-the-Shelf DC/DC Converters (IEEE Internet of Things Journal, 2020)

Printed and Flexible Microheaters Based on Carbon Nanotubes (Nanomaterials, 2020)

Cost-Effective Printed Electrodes Based on Emerging Materials Applied to Biosignal Acquisition (IEEE Access, 2020)

Recent Advances in Printed Capacitive Sensors (Micromachines, 2020)

Screen Printed Security-Button for Radio Frequency Identification Tags (IEEE Access, 2020)

Fabrication and Characterization of Humidity Sensors Based on Graphene Oxide–PEDOT: PSS Composites on a Flexible Substrate (Micromachines, 2020)

Optimization of Cost-Effective and Reproducible Flexible Humidity Sensors Based on Metal-Organic Frameworks (Sensors, 2020)

treNch: Ultra-Low Power Wireless Communication Protocol for IoT and Energy Harvesting (Sensors, 2020)

Rational design of an unusual 2D-MOF based on Cu(I) and 4-hydroxypyrimidine-5-carbonitrile as linker with conductive capabilities: a theoretical approach based on high-pressure XRD (Chemical Communications, 2020)

Low-cost gas sensing: Dynamic self-compensation of humidity in cnt-based devices (ACS Sensors, 2019)

Next Generation Antennas Based on Screen‐Printed and Transparent Silver Nanowire Films (Advanced Optical Materials, 2019)

Screen-Printed Chipless Wireless Temperature Sensor (IEEE Sensors, 2019)

Inexpensive Graphene Oxide Heaters Lithographed by Laser (Nanomaterials, 2019)

An optimized measurement algorithm for gas sensors based on carbon nanotubes: optimizing sensor performance and hardware resources (IEEE Internet of Things Journal, 2019)

Inexpensive and flexible nanographene-based electrodes for ubiquitous electrocardiogram monitoring (npj Flexible Electronics, 2019)

Design, fabrication and characterization of capacitive humidity sensors based on emerging flexible technologies (Sensors and Actuators B: Chemical, 2019)

Cost-effective PEDOT: PSS Temperature Sensors Inkjetted on a Bendable Substrate by a Consumer Printer (Polymers, 2019)

Flexible and robust laser-induced graphene heaters photothermally scribed on bare polyimide substrates (Carbon, 2019)

Functionalized and oxidized silicon nanosheets: Customized design for enhanced sensitivity towards relative humidity (Sensors and Actuators B: Chemical, 2019)

A Facile and Efficient Protocol for Preparing Residual-Free Single-Walled Carbon Nanotube Films for Stable Sensing Applications (Nanomaterials, 2019)

Time stability of carbon nanotube gas sensors (Measurement, 2019)

Fully Transparent Gas Sensor Based on Carbon Nanotubes (Sensors, 2019)

Shear-Force Sensors on Flexible Substrates Using Inkjet Printing (Journal of Sensors, 2019)

Over-Stretching Tolerant Conductors on Rubber Films by Inkjet-Printing Silver Nanoparticles for Wearables (Polymers, 2018)

Light and Pressure Sensors Based on PVDF With Sprayed and Transparent Electrodes for Self-Powered Wireless Sensor Nodes (IEEE Sensors, 2018)

Reconfigurable electronics: Addressing the uncontrolled increase of waste electrical and electronic equipment (Resources, Conservation and Recycling, 2018)

On the sintering of solution-based silver nanoparticle thin-films for sprayed and flexible antennas (Nanotechnology, 2018)

A Potassium Metal-Organic Framework based on Perylene-3, 4, 9, 10-tetracarboxylate as Sensing Layer for Humidity Actuators (Scientific Reports, 2018)

Compact readout system for chipless passive LC tags and its application for humidity monitoring (Sensors and Actuators A: Physical, 2018)

A Handwriting Method for Low-Cost Gas Sensors (ACS Applied Materials and Interfaces, 2018)

Wireless Chipless System for Humidity Sensing (Sensors, 2018)

In-Depth Study of Laser Diode Ablation of Kapton Polyimide for Flexible Conductive Substrates (Nanomaterials, 2018)

Design guidelines of laser reduced graphene oxide conformal thermistor for IoT applications (Sensors and Actuators A: Physical, 2018)

Scalable Deposition of Nanomaterial-Based Temperature Sensors for Transparent and Pervasive Electronics (Journal of Sensors, 2018)

Towards low-power electronics: self-recovering and flexible gas sensors (Journal of Materials Chemistry A, 2018)

Asymmetric enhanced surface interdigitated electrode capacitor with two out-of-plane electrodes (Sensors and Actuators B: Chemical, 2018)

Biomineralisation of carbonate and sulphate by the halophilic bacterium Halomonas maura at different manganese concentrations (Extremophiles, 2017)

Comparison of Fabrication Techniques for Flexible UHF RFID Tag Antennas [Wireless Corner] (IEEE Antennas and Propagation Magazine, 2017)

Characterization of an Interdigitated Capacitive Structure With Branches for Relative Humidity Sensing (IEEE Sensors Letters, 2017)

Read Range Enhancement of a Sensing RFID Tag by Photovoltaic Panel (Journal of Sensors, 2017)

Fully Printed Flexible Single-Chip RFID Tag with Light Detection Capabilities (Sensors, 2017)

16S rRNA gene-based characterization of bacteria potentially associated with phosphate and carbonate precipitation from a granular autotrophic nitrogen removal bioreactor (Applied Microbiology and Biotechnology, 2017)

Hybrid printed device for simultaneous vapors sensing (IEEE Sensors Journal, 2016)

Development of a printed sensor for volatile organic compound detection at μg/L-level (Sensors and Actuators B: Chemical, 2016)

Printed electrodes structures as capacitive humidity sensors: A comparison (Sensors and Actuators A: Physical, 2016)

Tunable MEMS piezoelectric energy harvesting device (Microsystem Technologies, 2016)

Integration of a Thin Film PDMS-Based Capacitive Sensor for Tactile Sensing in an Electronic Skin (Journal of Sensors, 2016)

Inkjet printing and photonic sintering of silver and copper oxide nanoparticles for ultra-low-cost conductive patterns (Journal of Materials Chemistry C, 2016)

The influence of salt concentration on the precipitation of magnesium calcite and calcium dolomite by Halomonas anticariensis (Expert Opin Environ Biol, 2016 )

Improved manufacturing process for printed cantilevers by using water removable sacrificial substrate (Sensors and Actuators A: Physical, 2015)

Passive UHF RFID Tag with Multiple Sensing Capabilities (Sensors, 2015)

HF RFID tag as humidity sensor: Two different approaches (IEEE Sensors Journal, 2015)

A printed capacitive–resistive double sensor for toluene and moisture sensing (Sensors and Actuators B: Chemical, 2015)

Isolation and metagenomic characterization of bacteria associated with calcium carbonate and struvite precipitation in a pure moving bed biofilm reactor-membrane bioreactor (Biofouling, 2015)

Bioprecipitation of Calcium Carbonate Crystals by Bacteria Isolated from Saline Environments Grown in Culture Media Amended with Seawater and Real Brine (BioMed Research International, 2015)

Printed single-chip UHF passive radio frequency identification tags with sensing capability (Sensors and Actuators A: Physical, 2014)

Design and development of sensing RFID Tags on flexible foil compatible with EPC Gen 2 (IEEE Sensors Journal, 2014)

Feasibility Study of a Simple and Low-Cost Device for Monitoring Trihalomethanes Presence in Water Supply Systems Based on Statistical Models (Water, 2014)

Cantilever Fabrication by a Printing and Bonding Process (Journal of Microelectromechanical Systems, 2014)

A novel electrode structure compared with interdigitated electrodes as capacitive sensor (Sensors and Actuators B: Chemical, 2014)

Design and characterization of a low thermal drift capacitive humidity sensor by inkjet-printing (Sensors and Actuators B: Chemical, 2014)

Properties and printability of inkjet and screen-printed silver patterns for RFID antennas (Journal of electronic materials, 2014)

Precipitation of Phosphate Minerals by Microorganisms Isolated from a Fixed-Biofilm Reactor Used for the Treatment of Domestic Wastewater (International Journal of Environmental Research and Public Health, 2014)

Precipitation of Carbonates Crystals by Bacteria Isolated from a Submerged fixed-film Bioreactor used for the Treatment of urban Wastewater (International Journal of Environmental Research, 2014)

Screen printed flexible radiofrequency identification tag for oxygen monitoring (Analytical chemistry, 2013)

Carbonate precipitation of bacterial strains isolated from sediments and seawater: Formation mechanisms (Geomicrobiology Journal, 2013)

Precipitation of carbonates by bacteria isolated from wastewater samples collected in a conventional wastewater treatment plant (International Journal of Environmental Science and Technology, 2013)

Printed and chipless humidity sensor using NFC inspired technology (2024 8th IEEE Electron Devices Technology & Manufacturing Conference (EDTM))

Tuning cellulose nanofibers for sustainable environmental sensors. Oral presentation at the 2024 Spring Meeting of the European Materials Research Society (E-MRS) 

RFID Portable System For Sensing Applications (2023 8th International Conference on Smart and Sustainable Technologies (SpliTech))

Paper-Based Impedimetric Sensor for on-Plant Humidity and Transpiration Monitoring (2023 IEEE Conference on AgriFood Electronics (CAFE))

A fast method to design and characterize the performance of UHF RFID tags (2022 IEEE International Conference on RFID Technology and Applications (RFID-TA))

Readout Portable System For Wireless Chipless Biosensing (2021 IEEE International Conference on RFID Technology and Applications (RFID-TA))

Laser-Fabricated Antennas for RFID Applications (2020 50th European Microwave Conference (EuMC))

Temperature sensing by Laser Reduced Graphene Oxide at different Laser Power Levels (2020 IEEE Sensors)

Laser-fabricated flexible nanographene-based sensor for pH detection in saliva (2020 IEEE Sensors)

UHF Printed Sensor for Force Detection (AllSensors 2020)

Low-Cost Energy-Autonomous Sensor Nodes Through RF Energy Harvesting and Printed Technology (AllSensors 2020)

Screen Printable Electrochemical Capacitors on Flexible Substrates (AllSensors 2020)

Fully 3D-Printed RFID Tags based on Printable Metallic Filament: Performance Comparison with other Fabrication Techniques (2019 IEEE-APS Topical Conference on Antennas and Propagation in Wireless Communications)

2D silicon nanoscheets – study on stability, sensitivity and photoluminescence for future applications (Graphene week 2019)

Acoustic characterization of laser-induced graphene film thermoacoustic loudspeakers (2019 IEEE Nano)

Flexible Carbon Nanotube Sensors with Screen Printed and Interdigitated Electrodes  (2019 IEEE Nano)

Use of Low-Cost Printed Sensors with RF Energy Harvesting for IoT (Smart Systems Integration 2019)

Low-Cost Bio-Impedance Analysis System for the Evaluation of Fruit Ripeness (2018 IEEE Sensors)

Why Use RF Energy Harvesting in Smart Grids (2018 IEEE CAMAD)

Surface Engineering of Two-Dimensional Hydrogenated Silicon Nanosheets for Tailored Applications (IOP Conf. Series: Journal of Physics 2018)

Cost-effective fabrication techniques for organic solar cells (MSE Kolloquium 2018 Advances in Energy Transition)

Production of Smart Sensor Systems for Distributed Sensing by Printing Techniques (MSE Kolloquium 2018 Advances in Energy Transition)

Thermal and Mechanical Energy Harvesting based on PVDF (MSE Kolloquium 2018 Advances in Energy Transition)

Modular platform for sensor networks (MSE Kolloquium 2018 Advances in Energy Transition)

Nuevos Materiales para sistemas de electrónica flexible e impresa (MultiMat2018)

Carbon nanotube based sensor for CO2 detection generated by lactase fermentation (CARIBMAT 2018)

CO2 sensor based on Carbon Nanotubes for detection of lactose fermentation (ISFOE 2018)

Large-scale spray deposition of carbon nanotube-based thin-film devices (DPG-Verhandlungen 2018)

Inkjet-Printing, Screen-Printing, and Intense Pulsed Light Sintering for Flexible Hybrid Sensor Systems (LOPEC 2018)

Current and Future Obstacles and Chances of Printed Electronics from a Technical and an Economical Perspective (LOPEC 2018)

Multi-Layer Printed Shear Force Sensor on Flexible Substrates (AllSensors 2018)

Flexible Laser-Reduced Graphene Oxide Thermistor for Ubiquitous Electronics (AllSensors 2018)

Design and Simulation of Out-of-Plane Nanomaterial-Based Thermocouples (AllSensors 2018)

Multipurpose Sensing Platform Based on Laser-Reduced Graphene Oxide for Flexible and Ubiquitous Electronics (Smart Systems Integration 2018)

Design, simulation and fabrication strategies for printed out-of-plane thermoelectric devices (2017 IEEE Sensors)

Transparent thermocouples based on spray-coated nanocomposites (2017 IEEE Sensors)

Inkjet and Screen Printing for an Environmental-Friendly Production of Electronic Devices ( (MSE Kolloquium 2017 Advances in Energy Transition)

Silicane: The New 2D Silicon Nanomaterial For Sensing and Electronics (Faculty of Engineering Graduate Research Symposium 2017)

Capacitive Force Sensors for an Artificial Skin (LOPEC 2017)

Fabrication of Low-Cost Devices Based on Chemically Modified 2D Silicon Nanosheets (International Conference on Materials for Advanced Technologies 2017)

A Sustainable Production of Electronic Devices for the Internet of Things by Inkjet and Screen Printing (International Workshop on “Internet of Things: sustainability and energy awareness” 2017)

Structured Electrodes and Dielectrics by Multilayer Screen Printing (International Workshop on “Internet of Things: sustainability and energy awareness” 2017)

Modified 2D Silicon Nanosheets in Electronics: From Synthesis to Application (Graphene Week 2017)

Flexible NH3 sensor based on spray deposition and inkjet printing (2016 IEEE Sensors)

Optimization of process parameters for inkjet printing of CNT random networks on flexible substrates (IEEE Nano 2016)

Fabrication, characterization and modeling of flexible electronic components based on CNT networks (IEEE ISCAS 2016)

On the Way From Synthesis to Application of Highly Luminescent Hybrid Materials Based on Two-Dimensional Silicon Nanosheets (SiNSs) (2nd Annual ATUMS Meeting)

Comparative study of printed capacitive sensors (10th Spanish Conference on Electron Devices, 2015)

Design and characterization of ink-jet and screen printed HF RFID antennas (2012 Fourth International EURASIP Workshop on RFID Technology)

Frequency response of variants of a cantilever beam (2012 International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design)

Geometrical analysis of a MEMS microphone (2012 International Conference on Synthesis, Modeling, Analysis and Simulation Methods and Applications to Circuit Design)

Context-awareness in a service oriented e-health platform (International Workshop on Ambient Assisted Living)

Editorial for the Special Issue on Functional Nanomaterials for Sensor Applications (Nanomaterials, 2022)

Editorial for the Special Issue on Advances in Capacitive Sensors (Micromachines, 2020)

Cost-Effective Techniques for Sensors Technology (Journal of Sensors, 2019)