Publications

JOURNAL PUBLICATIONS:

  1. Ekong, J., Blersch, D.M., Kardel, K., Carrano, A.L. (2019), Influence of Three-Dimensional Features of a Woven-fabric Substrate on Benthic Algal Biomass Production. Algal Research. 44, 101661. (https://doi.org/10.1016/j.algal.2019.101661)

  2. Khoshkhoo, A., Carrano, A.L., Blersch, D.M. and Kardel, K., (2019). Engineering of bio-mimetic substratum topographies for enhanced early colonization of filamentous algae. PloS one, 14(7), p.e0219150. (https://doi.org/10.1371/journal.pone.0219150)

  3. Kardel, K., Blersch, D.M., Carrano, A.L. (2018). Custom Design of Substratum Topography Increases Biomass Yield in Algal Turf Scrubbers. Environmental Engineering Science. 35 (8), 856-863. (https://doi.org/10.1089/ees.2017.0354)

  4. Gong, H., Snelling, D., Kardel, K., & Carrano, A. (2018). Comparison of Stainless Steel 316L Parts Made by FDM-and SLM-Based Additive Manufacturing Processes. JOM, 1-6. (https://doi.org/10.1007/s11837-018-3207-3)

  5. H. Ghaednia, O. Cermik, D. Marghitu, K. Kardel. (2017) “Collision Measurements Using Digital Image Correlation Techniques”. International Journal of Mechanical Sciences, 131(1), 836-846. (https://doi.org/10.1016/j.ijmecsci.2017.07.025)

  6. Sumaiya, S.*, Kardel, K., El Shahat, A. (2017). “Organic solar cell by inkjet printing – an overview”, Technologies, 5(3), 53. (doi:10.3390/technologies5030053)

  7. Kardel, K., Ghaednia, H., Carrano, A.L. and Marghitu, D. (2017) “Theoretical and experimental modeling of behavior of 3D printed materials under collision”. Additive Manufacturing, 14, 87-94. (https://doi.org/10.1016/j.addma.2017.01.004)

  8. Elliott, O., Gray, S., McClay, M., Nassief, B., Kardel, K., Carrano, A. L., Blersch, D. M. (2017). Design and Manufacturing of High Surface Area 3D‐Printed Media for Moving Bed Bioreactors for Wastewater Treatment. Journal of Contemporary Water Research & Education, 160(1), 144-156. (https://doi.org/10.1111/j.1936-704X.2017.03246.x)

  9. Blersch, D.M. Kardel, K. Carrano, A.L. (2016) “Customizing 3D-printed surface topography to govern species attachment preferences in a fresh water periphyton community”. Algal Research, 21, 52-57. (https://doi.org/10.1016/j.algal.2016.10.027)

  10. Kardel, K. Carrano, A.L. Blersch, D.M and Kaur, M. (2015) Preliminary development of 3D printed custom substrata for benthic algal biofilms. 3D Printing and Additive Manufacturing. 2(1):12-19. (https://doi.org/10.1089/3dp.2014.0024)

  11. N Javadian, K Kardel, F Adbesh, “A New Approach to Solving the Fixed Destination Multi-Depot Multiple Traveling Salesman Problem using Genetic Algorithms”, FRONTIERS SCIENCE SERIES, 49 (2007): 491-499.


CONFERENCE PUBLICATIONS:

  1. Sharaf Sumaiya, Adel El-Shahat, Kamran Kardel. “Multidimensional Modelling of Organic Solar Cell”, Proceeding of 2018 IEEE Global Humanitarian Technology Conference (GHTC), San Jose, California, October 2018.

  2. Khoshkhoo, A., Carrano, A.L., Blersch, D.M., Kardel, K., Ghaednia, H. “Understanding and engineering of natural surfaces with additive manufacturing”. Proceeding of the Solid Freeform Fabrication Symposium (SFF 2017), Austin, Texas, USA. August 5-8, 2017.

  3. Silwal, B., Gerdmann, C., Migues, S., Kardel, K., X, S. “The effect of arc-based direct metal energy deposition on PBF maraging steel”. Proceeding of the Solid Freeform Fabrication Symposium (SFF 2017), Austin, Texas, USA. August 5-8, 2017.

  4. A. Mirkouei, K. Kardel. “Enhance sustainability benefits through scaling-up bioenergy production from terrestrial and algae feedstock”. Proceedings of the ASME 2017 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC2017), At Cleveland, Ohio, USA. August 6-9, 2017.

  5. Carrano, A.L., Kardel, K., Blersch, D.M. “Understanding attachment preferences of Benthic Algae through controlled surface topographies on 3D-printed substrata”. 5th International Conference on Surface Metrology. (ICSM 2016), Poznan, Poland. April 4-7, 2016.