研討會論文

[1] G. C. Hsieh, C. H. Lin, and T. J. Hsieh, “Realization study of 100W high power density DC/DC converter,” Proc. 1995 The 16th Symp. Electrical Power Eng., pp.365-369, Nov. 1995

[2] 謝冠群, 林長華, 孫永安,“螢光燈管之特性及其匹配安定器的研究,” 海峽兩岸第三屆照明科技與營銷研討會, pp. 178-188, 深圳, 1996.

[3] 謝冠群, 林長華, 孫永安, “電子安定器的發展演進與節能,” 八十六年節約能源論文發表會, pp. 316-325, June, 1997.

[4] 謝冠群, 林長華, 于本中, “照明管理系統之發展與趨勢,”海峽兩岸第四屆照明科技與營銷研討會, pp. 126-145, 台北, 1997.

[5] G. C. Hsieh, and C. H. Lin, “Modeling and estimation of the fluorescent lamp and its pre-heating control,” LUX PACIFIC’97, pp. B113-119, Nagoya, Japan, Oct., 1997. [NSC86-2213-E011-078]

[6] G. C. Hsieh, C. H. Lin and B. J. Yu, “A harmonized strategy for breaking the acoustic resonance in the fluorescent lamp,” in Conf. Rec. IEEE PESC’98, vol. 2, pp. 2041-2046, Fukuoka, Japan, May 17-22, 1998. [NSC87-2213-E011-071]

[7] G. C. Hsieh, C. H. Lin and B. J. Yu, “Igniting behavior of the fluorescent lamp in high-frequency operation,” in Conf. Rec. IEEE IECON’98, vol. 2, pp. 964-969, Aachen, Germany, Aug./Sep. 1998. [NSC87-2213-E011-071]

[8] 林長華, 謝冠群, “電子安定器中電流諧波之數學模型,” 台灣電磁相容研討會, pp. 352-357, Oct. 1999. [NSC87-2213-E011-071]

[9] G. C. Hsieh, C. H. Lin, and H. H. Lin, “Design of feedback-controlled frequency-modulation electronic ballast and dimming system,” in Proc. 1999 The 20th Symp. Electrical Power Eng., pp. 315-319, Nov. 1999. [NSC88-2213-E011-061]

[10] C. H. Lin, G. H. Lin, and G. C. Hsieh, “A charge-pump dimming controller for back-lighting electronic ballast,” in Proc. 2000 The 21th Symp. Electrical Power Eng., pp. 953-957, Nov. 2000. [NSC89-2213-E-011-090]

[11] G. C. Hsieh, C. H. Lin, C. H. Lin, and H. I. Hsieh, “Primary-side charge-pump dimming controller for the cold-cathode fluorescent lamp ballast,” in Conf. Rec. IEEE TENCON’01, vol. 2, pp. 717-723, Singapore, Aug. 2001. [NSC89-2213-E-011-090]

[12] C. H. Lin, L. R. Chen, and W. S. Liu, “Based on spectrum relocation for eliminating striation in the fluorescent lamp,” in 2001 Workshop on Consumer Electronics, pp. 1-6, Oct. 2001.

[13] L. R. Chen, and C. H. Lin, “A circuit model for describing the Li-ion battery discharge behavior,” in 2001 Workshop on Consumer Electronics, pp. 11-15, Oct. 2001.

[14] G. C. Hsieh, W. H. Liu, C. H. Lin, and H. I. Hsieh, “Asymmetrical group-pulse-width-modulated technique for eliminating striation in the dimmable fluorescent lamps,” in Conf. Rec. IEEE IECON’01, vol. 2, pp. 1090-1095, Denver, Nov. 2001.

[15] C. H. Lin, L. R. Chen, and K. J. Pki, “Design of variable-frequency single-stage back-lighting electronic ballast with differential-integral controller,” in Proc. 2002 The 23th Symp. Electrical Power Eng., pp. 897-901, Dec. 2002. [NSC90-2213-E-129-006]

[16] L. R. Chen, and C. H. Lin, “A Li-ion battery discharge simulink model,” in Proc. 2002 The 23th Symp. Electrical Power Eng., pp. 240-244, Dec. 2002.

[17] C. H. Lin, and K. J. Pki, “A variable-frequency single-stage electronic ballast for cold cathode fluorescent lamp,” in 2002 Workshop on Consumer Electronics, pp. 208-213, Dec. 2002. [NSC90-2213-E-129-006]

[18] C. H. Lin, and K. J. Pai, “Differential-integral controller for the single-stage back-lighting electronic ballast,” in Conf. Rec. IEEE PESC’03, vol. 2, pp. 1000-1005, June 2003. [NSC90-2213-E-129-006]

[19] C. H. Lin, and K. J. Pai, “A digital dimming controller with soft-starting for single-stage back-lighting electronic ballast,” in Conf. Rec. CAC’03, pp. 1136-1141, Mar. 2003.

[20] C. H. Lin, L. R. Chen, and K. J. Pai, “Application of soft-starting technique to improve digital-dimming behavior for backlight module,” in Conf. Rec. IEEE INTELEC’03, pp. 727-732, Mar. 2003. [NSC90-2213-E-129-006]

[21] L. R. Chen, C. H. Lin, C. S. Liu, C. M. Lai and J. L. Jaw, “Phase-locked battery charge system,” in Conf. Rec. IEEE INTELEC’03, pp. 323-329, Mar. 2003. [NSC92-2213-E-129-009]

[22] L. R. Chen, C. H. Lin, R. C. Hsu, B. G. Ku, and C. S. Liu, “A study of Li-ion Battery Charge Forecasting Using Grey Theory,” in Conf. Rec. IEEE INTELEC’03, pp. 744-749,  Mar. 2003.

[23] C. H. Lin, and K. J. Pai, “Improvement of ignition behavior for cold cathode fluorescent lamp applying soft-starting technique,” in Proc. 2003 CSCST, pp. 124-128, Oct. 2003. [NSC92-2213-E-129-009]

[24] C. H. Lin, L. R. Chen, and K. J. Pai, “An improved digital-dimming controller for Back-light Module applying frequency-shift technique,” in Conf. Rec. IEEE IECON’03, pp. 496-501, Nov. 2003. [NSC92-2213-E-129-009]

[25] C. H. Lin, and K. J. Pai, “Design of single-stage backlight electronic ballast with maximum efficiency tracking,” in Proc. 2003 The 24th Symp. Electrical Power Eng., pp. 1154-1158, Dec. 2003.

[26] C. H. Lin, and J. C. Teng, “Design of high frequency emergency lighting electronic ballast for telecommunication power system,” in Proc. 2003 The 24th Symp. Electrical Power Eng., pp. 1150-1153, Dec. 2003. [NSC91-2213-E-129-007]

[27] C. H. Lin, K. C. Hsu, and H. C. Ho, “Improved digital-dimming controller design for backlight module applying frequency-shift technique,” in Proc. 2003 The 24th Symp. Electrical Power Eng., pp. 1464-1468, Dec. 2003. [NSC92-2213-E-129-009]

[28] C. H. Lin, Y. Lu, and K. J. Pai, “Digital-dimming controller with current spikes elimination technique for LCD backlight electronic ballast,” in Conf. Rec. IEEE APEC’04, pp. 1206-1211, Anaheim, USA, Feb. 22-26, 2004. [NSC92-2213-E-129-009]

[29] C. H. Lin, S. J. Yang, and K. J. Pai, “Design of Single-Stage Backlight Module Incorporating Piezoelectronic Transformer with Maximum-Efficiency Tracking,” in Conf. Rec. SCI’04, pp. 1106-1110, Florida, USA, July 18-21, 2004. [NSC92-2213-E-129-009]

[30] C. H. Lin, Y. Lu, and J. C. Teng, “Implementation of High-Frequency Emergency Lighting Electronic Ballast for Telecommunication Power System,” in Conf. Rec. SCI’04, pp. 626-630, Florida, USA, July 18-21, 2004. [NSC91-2213-E-129-007]

[31] C. H. Lin, Y. Lu, K. J. Pai, and Ying-Qi Chen, “Achieving Maximum-Efficiency Tracking Control for Backlight Electronic Ballast with Phase-Locked Loop Techniques,” in Conf. Rec. IEEE CCA’04, pp. 1651-1656, Taipei, ROC, Sep. 2-4, 2004. [NSC93-2213-E-129-014]

[32] C. H. Lin, and K. C. Hsu, “Design and Implementation of a Microcontroller-based Electronic Ballast for Metal Halide Lamp,” in Proc. 2004 Taiwan Power Electronics Conference., pp. 114-118, Taipei, Sep. 2004.

[33] C. H. Lin, and Ying-Chi Chen, “Design of Class E Backlight Module Incorporating Piezoelectric Transformer,” in Proc. 2004 The 25th Symp. Electrical Power Eng., pp. 1271-1275, Tainan, Nov. 2004. [NSC93-2213-E-129-014]

[34] C. H. Lin, Ying Lu, Yu-Kang Lo, and K. J. Pai, “Control Strategy for Eliminating the Temperature Effect of Piezoelectric Transformer in the Backlight Module,” in Conf. Rec. IEEE IECON’04, pp. 920-925, Pusan, Korea, Nov. 2004. [NSC93-2213-E-129-014]

[35] C. H. Lin, Y. Lu, and K. J. Pai, “Application of Maximum-Efficiency Tracking Control for Backlight Module Based on Phase-Locked Loop Technique,” in Conf. Rec. IEEE APCCAS’04, pp. 641-644, Tainan, ROC, Dec. 2004. [NSC93-2213-E-129-014]

[36] C. H. Lin, and Ying-Chi Chen, “Design of Class E Backlight Module Incorporating Piezoelectric Transformer,” in Conf. Rec. IEEE ISCAS’05, pp. 3655-3659, May 2005. [NSC93-2213-E-129-014]

[37] C. H. Lin, Ying-Chi Chen, and Ying Lu, “The Tracking of the Optimal Operating Frequency in Backlight Module Applying PLL Technique,” in Conf. Rec. IEEE ICSS’05,  pp. 203-208, Kaohsiung, April 2005. [NSC93-2213-E-129-014]

[38] C. H. Lin, Y. C. Chen, J. Y. Chen, and F. L. Wen, “The Elimination of the Temperature Effect on a Piezoelectric Transformer in a Backlight inverter Based on the Phase-locked Loop Technique,” in Conf. Rec. IEEE ICM’05, pp. 828-833, July 2005. [NSC93-2213-E-129-014]

[39] F. L. Wen, I. Hsu, Y. C. Chen, and C. H. Lin, “A Virtual Analyzer for Piezoceramics’ Admittance Measurement,” in Conf. Rec. IEEE ICM’05, pp. 185-190, July 2005.

[40] Y. C. Chen, F. L. Wen, C. H. Lin, and D. F. Lin, “A New Automatic Measurement System for a Bicycle,” in Conf. Rec. IEEE ICM’05, pp. 514-519, July 2005.

[41] C. H. Lin, Y. C. Chen, Y. Lu, and F. L. Wen, “DPLL Technique Applied to Backlight Module for Eliminating Temperature Effect in Piezoelectric Transformer,” in Conf. Rec. IEEE PEDS’05, pp. 1040-1045, Nov. 2005.  [NSC93-2213-E-129-014]

[42] C. H. Lin, Chung-Lun Ou, and Ying-Chi Chen, “Design of Class D Backlight Resonant Inverter Based on Digital Phase-Locked Loop Technique,” in Proc. 2004 Taiwan Power Electronics Conference, pp. 578-583, Taipei, Hsinchu, Sep. 2005.

[43] C. H. Lin, and Ken-Chuan Hsu, “Constant Power Design of High Frequency Electronic Ballast Applying PLL Technique for Metal Halide Lamp,” in Proc. 2005 The 26th Symp. Electrical Power Eng., pp. 1951-1955, Jung-Li, Dec. 2005.

[44] F. L Wen, S.-C. Mou, and C. H. Lin, “Processing Characteristics for Pulsed DC Plasma Using System Identification Technique,” in Proc. 2005 CACS Automatic Control Conference, (ISBN: 986-80773-4-6), pp. 88-93, Tainan, Taiwan, Nov 18-19, 2005.

[45] F. L. Wen, Y.-L. Lo, C.-H. Lin, and S.-C. Mou, “A Pulse DC Plasma Deposited Resistor Process,” in Proc. ICAM 2005 Proceedings, pp. 1147-11520, Nov. 28-Dec. 2, 2005, Grand Hotel, Taipei, Taiwan.

[46] C. H. Lin, C. L. Ou, T. S. Liu, and K. J. Pai, “A multi-lamp current sharing controller using current-mirror technique for LCD backlight module,” in Conf. Rec. IEEE PESC’06, pp. 1027-1032, Jeju, Korea, June 18-22, 2006..

[47] Y. K. Lo, C. H. Lin, and K. J. Pai, “Design and analysis of a piezoelectric transformer-based half-bridge resonant inverter for CCFL backlight modules,” in Conf. Rec. IEEE ISIE’06, pp. 892-896, Montreal, Canada, July 9-12, 2006.

[48] C. H. Lin, T. S. Liu, and C. L. Ou, “A novel constant power control of high frequency electronic ballast applying the PLL technique for a metal halide lamp,” in Conf. Rec. IEEE IPEMC’06, pp. 1963-1967, Shanghai, China, Aug. 14-16 2006.

[49] C. H. Lin, C. L. Ou, T. Y. Hung, and M. H. Lin, “The Elimination of the Leakage Current Effect for LCD Backlight Module Based on the Primary-side Control and the DPLL Technique,” in Proc. 2006 Taiwan Power Electronics Conference, pp. 435-440, Yunlin, Sep. 2006.

[50] C. H. Lin, C. L. Ou, and T. Y. Hung, “Realization of Digitized Current Equalizer for High Power LED Backlighting,” in Proc. 2006 The 27th Symp. Electrical Power Eng., pp. OB5.1.1- OB5.1.5, Hsinchu, Dec. 2006.

[51] C. H. Lin, G. Lin, Y. J. Shiue, J. J. Liu, and Y. C. Li, “Realization of Two-Phase Electronic Ballast for Xenon Lamp,” in Proc. 2006 The 27th Symp. Electrical Power Eng., accepted for publication, Hsinchu, Dec. 2006.

[52] C. H. Lin, J. H. Su, and C. Y. Ho, “Design of Class E Backlight Module With Optimal Operating Frequency Tracking Mechanism,” in Conf. Rec. IEEE ICIEA’07, pp. 1933-1938, Harbin, China, May 23-25, 2007.

[53] C. H. Lin, T. Y. Hung, and Y. Lu, “The Elimination of the Leakage Current Effect for LCD Backlight Module Based on the Primary-side Control and the DPLL Technique,” in Conf. Rec. IEEE ICIEA’07, pp. 1950-1955, Harbin, China, May 23-25, 2007.

[54] C. H. Lin, and T. Y. Hung, “Study of the Parasitical Capacitance Effect in LCD Shell and Its Control Strategy,” in Proc. 2007 Taiwan Power Electronics Conference, pp. 733-739, Changhua, Sep. 7, 2007.

[55] M. H. Lin, T. Y. Hung, and C. H. Lin, “Suppressing Temperature Effect of Piezoelectric Transformer for Backlight Module Based on Micro Controller” in Proc. 2007 Taiwan Power Electronics Conference, pp. 950-954, Changhua, Sep. 7, 2007.

[56] C. H. Lin, T. Y. Hung, and K. J. Pai, “A Balancing Strategy and Implementation of Current Equalizer For High Power LED Backlighting,” in Conf. Rec. IEEE PEDS’07, pp. 1613-1617, Bangkok, Thailand, Nov. 27-30, 2007.

[57] C. H. Lin, T. Y. Hung, and K. J. Pai, “Modeling of the Parasitical Capacitance Effect in LCD Panel And Corresponding Elimination Strategy,” in Conf. Rec. IEEE PEDS’07, pp. 1618-1623, Bangkok, Thailand, Nov. 27-30, 2007.

[58] C. M. Wang, C. H. Su, C. H. Lin, M. Y. Liu, and K. F. Fang, “High Performance Single-Phase Voltage Regulator with a Simple Circuit Topology,” in Conf. Rec. IEEE PEDS’07, pp. 1456-1460, Bangkok, Thailand, Nov. 27-30, 2007.

[59] C. M. Wang, C. H. Su, C. H. Lin, M. Y. Liu, and K. F. Fang, “A Novel Zero-Voltage-Switching Single-Stage High-Power-Factor Electronic Ballast,” in Conf. Rec. IEEE PEDS’07, pp. 1563-1567, Bangkok, Thailand, Nov. 27-30, 2007.

[60] C. H. Lin, J. H. Su, and C. M. Wang, “Multi-Lamp Current-Balancing Technique for Cold Cathode Fluorescent Lamp Based on PWM Control and Fourier Analysis,” in Conf. Rec. IEEE ICIT’08, pp. MP1-B3, Chengdu, China, Apr. 21-24, 2008.

[61] C. H. Lin, K. J. Pai, and C. M. Wang, “Microcontroller-Based Backlight Module with DPLL Function for Reducing the Parasitic Capacitance Effect in LCD Panel Housing,” in Conf. Rec. IEEE ICIT’08, pp. MP1-B4, Chengdu, China, Apr. 21-24, 2008.

[62] C. M. Wang, C. H. Su, C. H. Lin, M. Y. Liu, M. C. Jiang, and K. F. Fang, “High-Power-Factor Soft-Switched DC Power Supply System,” in Conf. Rec. IEEE ICIT’08, pp. MP2-B5, Chengdu, China, Apr. 21-24, 2008.

[63] C. M. Wang, C. H. Su, C. H. Lin, M. Y. Liu, M. C. Jiang, and K. F. Fang, “A ZVS-PWM Voltage-Doubler Rectifier With High Power Factor,” in Conf. Rec. IEEE ICIT’08, pp. TP2-B2, Chengdu, China, Apr. 21-24, 2008.

[64] C. H. Lin, S. P. Hsieh, C. M. Wang, and Chung-Heng Lin, “Design of Resonant Backlight Inverter By Using Primary-Side Control and Double-Ended Driving,” in Conf. Rec. IEEE ICIEA’09, pp. 794-798, Xi’an China, May 25-27, 2009.

[65] C. H. Lin, M. H. Hung, and C. M. Wang, “Design and Implementation of Full-Bridge driver for Carbon Nanotube Field Emission Lamp,” in Conf. Rec. IEEE ICIEA’09, pp. 811-815, Xi’an China, May 25-27, 2009.

[66] C. Y. Ho, T. W. Jou, and C. H. Lin, “Design and Implementation of Four-Phase PWM Dimming Control for Backlight Inverter,” in Conf. Rec. IEEE ICIEA’09, pp. 1068-1073, Xi’an China, May 25-27, 2009.

[67] C. M. Wang, C. H. Su, C. H. Lin, M. C. Jiang, C. C. Li, and S. Y. Chang, “A ZCS-PWM Voltage-Doubler Rectifier With High Power Factor,” in Conf. Rec. IEEE ICIEA’09, pp. 1407-1412, Xi’an China, May 25-27, 2009.

[68] C. M. Wang, C. H. Su, C. H. Lin, and S. Y. Chang, “A Novel Single-Phase Soft-Switching AC Chopper Without Auxiliary Switches,” in Conf. Rec. IEEE ICIEA’09, pp. 2949-2954, Xi’an China, May 25-27, 2009.

[69] C. H. Lin, M. H. Hung, C. M. Wang and C. C. Yang, “High Voltage Pulse Generator with Energy Recovery Circuit for Driving CNT Field Emission Lamp,” in Conf. Rec. IEEE ISIE’09, pp. 880-884, Seoul Korea, July 5-8, 2009.

[70] C. M. Wang, C. H. Su, C. H. Lin, and C. H. Liu, “A Series-Resonant Single-Phase AC Chopper,” in Conf. Rec. IEEE ISIE’09, pp. 1240-1244, Seoul Korea, July 5-8, 2009.

[71] C. H. Lin, M. H. Hung, and C. M. Wang, “Analysis and Implementation of a High Voltage Pulse Driver with Energy Recovery Circuit for CNT-FE Lamp,” in Conf. Rec. IEEE PEDS’09, pp. 557-562, Taipei Taiwan, Sep. 2-5, 2009.

[72] C. M. Wang, M. C. Jiang, C. H. Lin, C. H. Liu, and D. J. Yang, “A Series-Resonant Single-Phase Step up/down AC Chopper,” in Conf. Rec. IEEE PEDS’09, pp. 603-608, Taipei Taiwan, Sep. 2-5, 2009.

[73] C. H. Lin, C. M. Wang, M. H. Hung, and C. Y. Ho, “High Voltage Driving Circuit with Negative Pulse feature for Tubular Field Emission Lamp,” in Conf. Rec. IEEE ICIEA’10, pp. 1118-1123, Taichung Taiwan, Jun. 15-17, 2010.

[74] C. H. Lin, H. W. Liu, and C. M. Wang, “Design and Implementation of a Bi-directional Power Converter for Electric Bike with Charging Feature,” in Conf. Rec. IEEE ICIEA’10, pp. 538-543, Taichung Taiwan, Jun. 15-17, 2010.

[75] C. M. Wang, C. H. Lin, T. C. Yang, and H. Y. Lin “Analysis and Design of High Performance Voltage-Doubler Rectifier,” in Conf. Rec. IEEE ICIEA’10, pp. 1124-1129, Taichung Taiwan, Jun. 15-17, 2010.

[76] C. Y. Ho, T. W. Chou, and C. H. Lin, “Design and Implementation of Six-Phase PWM Dimming Control for Backlight Inverter,” in Conf. Rec. IEEE ICIEA’10, pp. 1136-1141, Taichung Taiwan, Jun. 15-17, 2010.

[77] C. Y. Ho, T. W. Chou, and C. H. Lin, “System Parameters Comparison between Four-Phase and Six-Phase PWM Dimming Control for Backlight Inverter,” in Conf. Rec. IEEE ICIEA’10, pp. 1130-1135, Taichung Taiwan, Jun. 15-17, 2010.

[78] C. H. Lin, C. M. Wang, C. H. Liu, and T. C. Yang, “A Forward Converter Employing a Simple ZCS-PWM Auxiliary Circuit to Achieve Soft-Switching and Power Transformer Resetting,” in Conf. Rec. IEEE IPEC’10, pp. 118-124, Sapporo Japan, Jun. 21-24, 2010.

[79] C. M. Wang, C. H. Lin, C. H. Liu, and T. C. Yang, “High Performance Single-Stage Transformer-Isolated AC/DC Converter,” in Conf. Rec. IEEE IPEC’10, pp. 131-136, Sapporo Japan, Jun. 21-24, 2010.

[80] C. Y. Ho, C. H. Lin, and T. W. Chou, “Design and Analysis for Backlight Inverter with Six-Phase PWM Dimming Control Circuit,” in Conf. Rec. IEEE IPEC’10, pp. 1214-1221, Sapporo Japan, Jun. 21-24, 2010.

[81] C. M. Wang, C. H. Lin, and H. Y. Lin, “A ZVS-PWM inverter using a simple ZVS-PWM auxiliary commutation pole,” in Conf. Rec. IEEE ICIEA’11, pp. 1203-1208, Beijing China, Jun. 21-23, 2011.

[82] C. M. Wang, C. H. Lin, and H. Y. Lin, “High-efficiency and low-stress ZVS-PWM bidirectional DC/DC converter for battery charger,” in Conf. Rec. IEEE ICIEA’11, pp. 1185-1190, Beijing China, Jun. 21-23, 2011.

[83] C. H. Lin, C. M. Wang, M. H. Hung, and C. Y. Ho, “A low-cost single-switch field-emission driver applying impulsed-power technique for lighting,” in Conf. Rec. IEEE ICIEA’11, pp. 686-691, Beijing China, Jun. 21-23, 2011.

[84] C. H. Lin, C. M. Wang, and M. H. Hung, “Series-resonant battery charger with synchronous rectifiers for LiFePO4 battery pack,” in Conf. Rec. IEEE ICIEA’11, pp. 316-321, Beijing China, Jun. 21-23, 2011.

[85] C. Y. Ho, C. H. Lin, and C. M. Wang, “Design and Analysis for Backlight Inverter with Four-phase PWM Dimming Control,” in Conf. Rec. IEEE TENCON’11, pp. 1344-1348, Bali Indonesia, Nov. 21-24, 2011.

[86] C. M. Wang, C. H. Lin, and Y. H. Lai, “A High Power Factor ZCS-PWM Transformer Isolated Voltage-Double Boost Rectifier,” in Conf. Rec. IEEE TENCON’11, pp. 398-402, Bali Indonesia, Nov. 21-24, 2011.

[87] C. M. Wang, C. H. Lin, Y. H. Lai, and C. Y. Ho, “Zero-Current-Transition Current-Fed Full-Bridge PWM Converter,” in Conf. Rec. IEEE TENCON’11, pp. 595-599, Bali Indonesia, Nov. 21-24, 2011.

[88] C. H. Lin, H. Y. Chao, C. M. Wang, and M. H. Hung, “Battery Management System with Dual-Balancing Mechanism for LiFePO4 Battery Module,” in Conf. Rec. IEEE TENCON’11, pp. 450-454, Bali Indonesia, Nov. 21-24, 2011.

[89] C. H. Lin, M. H. Hung, C. Y. Ho, and C. M. Wang, “High Voltage Pulse Power Supply for Driving Tubular Field Emission Lamp Based on Flyback Topology,” in Conf. Rec. IEEE TENCON’11, pp. 514-518, Bali Indonesia, Nov. 21-24, 2011.

[90] C. H. Lin, C. M. Wang, C. Y. Ho, and M. H. Hung, “Dual-Balancing Control for Improving Imbalance Phenomenon of Lithium-Ion Battery Packs,” in Conf. Rec. IEEE ICSET’12, pp. 229-234, Nepal, Sep. 24-27, 2012.

[91] C. H. Lin, C. M. Wang, M. H. Hung, and R. H. Wu, “Eliminating the Wall Charge in Field Emission Lamp Based on the Impulse-Power Technique with PLL Mechanism,” in Conf. Rec. IEEE ICSET’12, pp. 235-240, Nepal, Sep. 24-27, 2012.

[92] C. M. Wang, C. H. Lin, H. Y. Lin, Y. H. Lai, and M. Y. Liu, “A Soft-Switching Inverter Using a Voltage Clamp Soft-Switching Step-Up/Down DC Link,” in Conf. Rec. IEEE ICSET’12, pp. 276-280, Nepal, Sep. 24-27, 2012.

[93] C. M. Wang, C. H. Lin, S. Y. Hsu, Y. H. Lai, and M. Y. Liu, “A ZVS-PWM Interleaved Transformer-Isolated Boost DC-DC Converter with a Simple ZVS-PWM Auxiliary Circuit,” in Conf. Rec. IEEE ICSET’12, pp. 299-304, Nepal, Sep. 24-27, 2012.

[94] C. H. Lin, M. H. Hung, C. M. Wang, and L. C. Lee, “An Impulsed-Power Supply for Field Emission Lamp with PLL Feedback Mechanism,” in Conf. Rec. IEEE TENCON’13, pp. 123-126, Xi’an, Oct. 22-25, 2013.

[95] C. H. Lin, M. H. Hung, C. M. Wang, and C. Y. Ho, “Design and Implementation of a Fast Charger with SOC Estimation Technique for LiCoO2 Battery,” in Conf. Rec. IEEE TENCON’13, pp. 324-327, Xi’an, Oct. 22-25, 2013.

[96] C. M. Wang, S. Y. Hsu, C. H. Lin, C. M. Lu, and J. C. Li, “A ZCS-PWM Interleaved Boost DC/DC Converter,” in Conf. Rec. IEEE TENCON’13, pp. 456-469, Xi’an, Oct. 22-25, 2013.

[97] C. M. Wang, C. M. Lu, C. H. Lin, and J. C. Li, “A ZVS-PWM Interleaved Boost DC/DC Converter,” in Conf. Rec. IEEE TENCON’13, pp. 877-880, Xi’an, Oct. 22-25, 2013.

[98] C. Y. Ho, C. H. Lin, and C. C. Wu, “System Parameters Compare between Six-Phase and Improved Twelve-Phase PWM Dimming Control by Design Rule for Backlight Inverter,” in Conf. Rec. IEEE TENCON’13, pp. 1134-1137, Xi’an, Oct. 22-25, 2013.

[99] C. M. Wang, C. M. Lu, C. H. Lin, and J. C. Li, “A ZVS-PWM Interleaved Boost Rectifier,” in Conf. Rec. IEEE IFEEC’13, pp. 48-51, Tainan, Nov. 3-6, 2013.

[100] C. H. Lin, M. H. Hung, C. M. Wang, and C. Y. Ho, “A Microcontroller-Based Fast Charger with State-Of-Charge Estimation for LiCoO2 Battery,” in Conf. Rec. IEEE IFEEC’13, pp. 115-118, Tainan, Nov. 3-6, 2013.

[101] C. M. Wang, C. M. Lu, C. H. Lin, and C. Y. Ho, “A ZCS-PWM Interleaved Forward Converter,” in Conf. Rec. IEEE IFEEC’13, pp. 344-348, Tainan, Nov. 3-6, 2013.

[102] C. H. Lin, M. H. Hung, C. M. Wang, and L. C. Lee, “A Novel Impulsed-Power for Field Emission Lighting with Phase-Locked Loop Feedback Mechanism,” in Conf. Rec. IEEE IFEEC’13, pp. 590-593, Tainan, Nov. 3-6, 2013.

[103] C. H. Lin, C. M. Wang, W. H. Li, M. H. Hung, and L. C. Lee, “Design of MCU-Based Electronic Ballast for Electrodeless Fluorescent Lamp,” in Conf. Rec. IEEE ICIEA’14, pp. 292-296, Hangzhou, June 9-11, 2014.

[104] C. H. Lin, C. M. Wang, C. Y. Chen, M. H. Hung, and L. C. Lee, “A MCU-Based Intelligent Charger with Multi-Charging Mode,” in Conf. Rec. IEEE ICIEA’14, pp. 286-291, Hangzhou, June 9-11, 2014.

[105] C. M. Wang, C. H. Lin, H. C. Kuo, and C. I. Lin, “Zero-Current Transition Interleaved Boost DC/DC Converter,” in Conf. Rec. IEEE ICIEA’14, pp. 278-281, Hangzhou, June 9-11, 2014.

[106] C. M. Wang, C. H. Lin, and C. H. Cheng, “A ZCS-PWM Interleaved Boost Rectifier,” in Conf. Rec. IEEE ICIEA’14, pp. 282-285, Hangzhou, June 9-11, 2014.

[107] C. H. Lin, C. M. Wang, L. C. Lee, and T. Ou-Yang, “Design and implementation of electronic ballast for electrodeless fluorescent lamp with primary-side control,” in Conf. Rec. IEEE ICPE’15, pp. 2365-2368, Seoul, Korea, June 1-5, 2015.

[108] C. M. Wang, C. H. Lin, and G. U. Chen, “A Single-Stage Resonant Buck-Boost AC Voltage Regulator,” in Conf. Rec. IEEE ICPE’15, pp. 2701-2705, Seoul, Korea, June 1-5, 2015.

[109] C. H. Lin, K. K. Su, L. H. Kuo, and C. M. Wang, “Design of a Burst Dimming Controller with Primary-Side Control for EFL Electronic Ballast,” in Conf. Rec. IEEE INTELEC’15, pp. 1048-1051, Osaka, Japan, Oct. 18-22, 2015.

[110] C. M. Wang, Y. H. Lai, K. Y. Chen, and C. H. Lin, “High-Power-Factor ZCS-PWM DC Power Supply System,” in Conf. Rec. IEEE INTELEC’15, pp. 1070-1073, Osaka, Japan, Oct. 18-22, 2015.

[111] C. M. Wang, C. I. Lin, K. Y. Chen, and C. H. Lin, “A ZCS-PWM Interleaved Boost Rectifier,” in Conf. Rec. IEEE INTELEC’15, pp. 1092-1095, Osaka, Japan, Oct. 18-22, 2015.

[112] C. H. Lin, C. M. Wang, and W. J. Lin, “A SOC-based Intelligent Charger with Multi-Charging Mode,” in Conf. Rec. IEEE IFEEC’15, pp. xxxx-xxxx, Taipei, Taiwan, Nov. 1-4, 2015.

[113] C. H. Lin, C. M. Wang, and W. J. Lin, “Digital-Dimming Controller with Primary-Side Regulation Technique for EFL Electronic Ballast,” in Conf. Rec. IEEE IFEEC’15, pp. xxxx-xxxx, Taipei, Taiwan, Nov. 1-4, 2015.

[114] C. M. Wang, K. Y. Chen, C. H. Lin, and C. H. Lin, “A Soft-Switching Interleaved Boost Rectifier,” in Conf. Rec. IEEE IFEEC’15, pp. xxxx-xxxx, Taipei, Taiwan, Nov. 1-4, 2015.

[115] C. H. Lin, C. M. Wang, and C. Y. Ho, “Implementation of State-of-Charge and State-of-Health Estimation for Lithium-Ion Batteries,” in Conf. Rec. IEEE IECON’16, pp. 4790-4795, Florence, Italy, Oct. 23-27, 2016.

[116] H.-D. Liu, and C. H. Lin, “A MPPT Control Strategy of Solar Power Systems for Low Irradiance Conditions,” in Conf. Rec. IEEE IFEEC’17, pp. 932-935, Kaohsiung, Taiwan, June 3-7, 2017.

[117] C. H. Lin, and Wan-Ju Lin “A Microcontroller-based Battery Test System with Energy Recycling Techniques,” in Conf. Rec. IEEE IFEEC’17, pp. 818-822, Kaohsiung, Taiwan, June 3-7, 2017.

[118] C. H. Lin, G.-J. Chen, H.-D. Liu, K.-F. Chen , “A Programmable Battery Test System with Energy Recycling Feature Based on Sinusoidal Loading Technique,” in Conf. Rec. IEEE IPEC’18, pp. 1341-1345, Niigata, Japan, May 20-24, 2018.

[119] C. H. Lin, C.-M. Wang, and G.-J. Chen, “A Programmable Battery Tester with Energy Recycling Technique for Lithium-ion Battery,” in Conf. Rec. IEEE PEMC’18, pp. 1053-1056, Buadpest, Hungary, Aug. 26-30, 2018.

[120] C.-M. Wang, C. H. Lin, C.-H. Cheng, and B.-H. Wu, “A High Performance Soft-Switching AC/DC Converter,” in Conf. Rec. IEEE ICPE’19, pp. 470-474, Busan, Korea, May 27-30, 2019.

[121] C. H. Lin, K.-C. Chen, and Y.-L. Lee, “Design and Implementation of a Diagnostic System for Lithium Battery Module Based on Sinusoidal Loading Technique,” in Conf. Rec. IEEE ICPE’19, pp. 1888-1903, Busan, Korea, May 27-30, 2019.

[122] C. H. Lin, Hwa-Dong Liu, and Chien-Ming Wang, “Eliminating The Problem of Trapping in Local Maximum Power Point under Partial Shading Conditions for PV System,” in Conf. Rec. IEEE IFEEC’19, pp. 1147-1153, Singapore, Nov. 25-28, 2019.

[123] 蘇可耕、彭泉閔、林長華, “應用於驅動大氣電漿之高壓短脈衝電漿產生器設計與實現,” 2020綠色能源研討會, pp. 58-63, 桃園中壢, 2020.

[124] Hwa-Dong Liu, and C. H. Lin, “New Maximum Power Point Tracking for PV Systems Under Partial Shading Conditions,” in Conf. Rec. IEEE IFEEC’21, Taipei, Taiwan, Nov. 16-19, 2021.

[125] Y.-L. Lee, and C. H. Lin, “Real-Time Power Split Strategy of Hybrid Energy Storage System for Electric Vehicle,” in Conf. Rec. IEEE IFEEC’21, Taipei, Taiwan, Nov. 16-19, 2021.