Embedded Files
Location: Mars STEAM Building
Large/Small STEAM Technology Rooms
Location: Mars STEAM Building
Large/Small STEAM Technology Rooms
Hardware
Hardware
Equipment: Silhouette Cameo PRO MK-ll
Manual: Silhouette Cameo Vinyl Printer User Manual
Heat Press - Set to 315 degrees for t-shirts
Software
Software
Silhouette Studio
Heat Transfer Vinyl
T-Shirts
Wood
Parchment Paper
Heat press
Instructions
Instructions
For printing:
Place vinyl shiny side down on the mat
Flip the roller release on the right hand side of the Cameo down to adjust plastic guide to fit in the groove then flip the release back up to secure for easy loading
Align the mat between the blue lines with arrows, then press LOAD on the Cameo screen
Open Silhouette Studio, then go to FILE > NEW
Drag and drop your design
Go to DESIGN > SELECT TRACE AREA, then draw a box around the entire design
Go to SEND > Check MIRROR if the design is not already flipped, then PRINT
For heat press for wood:
Set heat press to 300 degrees Fahrenheit
Sand your piece of wood and wipe off the excess dust
Place vinyl on the wood and place parchment paper on top
Place on the heat press bed and lower top to latch shut
Leave in for 20-40 seconds
Once timer goes off, pull out, and let cool completely
Once completely cool, peel off clear plastic
Link Tutorials
Silhouette Cameo 3 And Htvront Heat Transfer Vinyl: The Ultimate Crafting Duo!
Silhouette Studio Tutorial for Beginners
Examples
Examples
Image Gallery
Report abuse