Multimedia

Fixture Iterations

First few iterations to the supported fixture which involved thickening the parts and changing it to the clip in port on the gimbal.

First iteration of the Swagelok fixture which involved drilling into an existing cap and attaching it to the part. Later changed to one single print.

Final design of both fixtures 3D printed in nylon carbon fiber material.

First flight of drone at initial training by Drones Made Easy

First flight by team members in UCSD Aerodrome

Final test flight for demonstration at Scripps Institute for sponsors

IMG_4390.MOV

First team flight test with all components attached to the drone.

20220524_133719.mp4

Demonstration to sponsors at Scripps Institute.

First visit to Scripps to learn about the labs and testing the project will be a part of.

Team photo taken on Scripps pier with sponsors Dr. Jooil Kim and Dr. Timothy Lueker.

Set up of tube verification testing to compare new tubing air samples to current ones.

Test of electronics and signal communication system

First iteration of electronics fixture before sidewalls were added

Final design of electronics with all attachment floors and sidewalls

Schematic of overall final design

Page updated

Report abuse