Embedded Files
Post here all CAD files used in the project with enough information so that sponsor could build another prototype if necessary.
Total System Assembly
Total System Assembly
The full assembly of the vest can be found here.
Manifolds - The pump adapter connects the larger diameter tubing needed to fit the pump's inlet and outlets to the smaller diameter tubing that transports coolant to the remaining tubes.
Water Blocks
Water Blocks
The water block is surrounded by the peltier plates, which cools the water flowing through the block. The block has an inlet and outlet part to attach the corresponding tubes to.
Buck Converter Cage- The buck converter cage holds the electronics necessry to bring a higher voltage down to a usable 12V.
Peltier Assembly
Peltier Assembly
Thermocouple Adapters - The pump adapter connects the larger diameter tubing needed to fit the pump's inlet and outlets to the smaller diameter tubing that transports coolant to the remaining tubes.
Pump Adapter
Pump Adapter
The pump adapter connects the larger diameter tubing needed to fit the pump's inlet and outlets to the smaller diameter tubing that transports coolant to the remaining tubes.
Page updated
Report abuse