Embedded Files
Final design of brake assembly
Final design of brake assembly
Top view of updated brake solution, thin 2 plate design that fits under the seat lip.
Front view of updated brake solution
Side view of updated brake solution, the master cylinder and linear actuator fit underneath the profile of the seat.
First design of Brake assembly
First design of Brake assembly
The first brake design mounted on the side of the go-kart, eventually deemed too complex to reproduce by our sponsor.
First design of the brake mounting consisted on 3 different components each mounting the brake components onto a T-rail.
Primary brake design slotted onto a T-rail and was universal for where it could be mounted. This T-rail had many mounting points and was customizable for many locations.
Final steering design CAD model
Final steering design CAD model
Steering motor was meant to sit parallel to the steering shaft and drives it via gear pully system (not pictured)
The steering solution also utilizes universal T-rails to mount the assembly securely in the go-kart connecting the rail systems to fixed parts of the chassis.
Pictures of final designs and components
Pictures of final designs and components
IMG_0650.MOVIMG_0648.MOVIMG_0649.MOVIMG_0658.MOVIMG_0629.MOV
Page updated
Report abuse