Journal
[1] S. M. B. Billah*, Mohammed Amran, Ahamed- Al Arifin, Mashky Chowdhury Surja “CFD-Informed MATLAB/Simulink Surrogate Modeling of the INVELOX Wind System for Rapid Speed Ratio Prediction” Journal Européen des Systèmes Automatisés(JESA), Vol. 59, No. 9, pp. 2545-2553. https://doi.org/10.18280/jesa.590910, 2026 (Scopus Indexed,Q2/Q3)
[2] Khasru Faiz, Umme Intisa, S. M. B. Billah*, “Enantioselective Sorting Using Anisotropic Metasur faces” Physica Scripta , IOP Publishing Ltd. doi : 10.1088/1402-4896/aea5f5, 2026 (Scopus Indexed, Q1/Q2)
[3] Ahamed- Al- Arifin, S.M. Baque Billah, Kazi Muhammad Asif Ashrafi, "Development of Less Computational Costly Ultrasound Imaging Using the Finite Element Method," International Journal of Engineering Trends and Technology, vol. 72, no. 5, pp. 299-312, 2024, https://doi.org/10.14445/22315381/IJETT-V72I5P131 (Scopus Indexed Q3)
[4] Ahamed-Al-Arifin, S.M. Baque Billah, Amarto Sarker, Saif Hassan Safin, and Mohammed Amran, “Assessing the effectiveness of PV-fed and DC voltage source-fed Z-sources, quasi-Z-sources, and current-fed quasi-Z-source inverters,” EDU Journal of Computer and Electrical Engineering, 2024.
[5] Md. A. Islam, Md. N. Bin Alamgir, S. I. Chowdhury, S. M. B. Billah “Lead-free organic inorganic halide perovskite solar cell with over 30% efficiency” Journal of Ovonic Research 18 (3),395-409, 2022. doi: 10.15251/JOR.2022.183.395 (Scopus Indexed Q3)
[6] Muhammad Samiul Alam, Kazi Muhammad Asif Ashrafi, Marjana Tahmid, S. M. B. Billah, T. Khadem “Design of MPPT Based PV System Using DC-DC Converter” EDU Journal of Computer and Electrical Engineering 2(1),24-29, 2021. doi: 10.46603/ejcee.v2i1.27
Conference papers
[1] Ahamed- Al-Arifin, S. M. B. Billah, I. H. Noman and R. Hossain, "Design of a Novel Single Phase Three- Stage Cascaded Quasi-Z-Source Inverter with Improved THD and High Boost Voltage," 2025 IEEE 2nd International Conference on Circuits, Power and Intelligent Systems (CCPIS), Bhubaneswar, India, 2025, pp. 1-6, doi: 10.1109/CCPIS65231.2025.11233846
[2] S. M. B. Billah and S. Qasim, "Development of MATLAB simulink model of Invelox to Analyze The Impact of Inlet Height On speed ratio," 2019 IEEE International Conference on Energy and Power Engineering (ICEPE), Dhaka, Bangladesh, 2019, pp. 1-5, doi: 10.1109/CEPE.2019.8726795.
[3] S. Qasim and S. M. B. Billah, " Development of MATLAB Simulink Model of INVELOX Based on Inlet Funnel Diameter," 2019 International Conference on Engineering Research and Education (ICERIE), Sylhet, Bangladesh.
[4] S. M. B. Billah, M. Jakaria and P. Nath, "A Novel Regenerative Braking System of BLDC Motor for Lightweight Electric Vehicles: An Analysis of Braking Characteristics," 2017 IEEE 2nd International Conference on Electrical & Electronic Engineering (ICEEE), Rajshahi, Bangladesh, 2017, pp. 1-4, doi: 10.1109/CEEE.2017.8412907.
[5] S. M. BaqueBillah, K. M. Kabir, M. O. Islam, S. Barua, M. S. Mahmud and M. S. Hossain, “Hydrogen energy storage based green power plant in seashore of Bangladesh: Design and optimal cost analysis”," 2017 IEEE International Conference on Innovations in Green Energy and Healthcare Technologies (IGEHT), Coimbatore, India, 2017, pp. 1-5. doi: 10.1109/IGEHT.2017.8094042
[6] M. S. Hossain, S. M. B. Billah, S. Barua, M. S. Mahmud and T. Khadem, “ Life cycle cost analysis of solar-LED alternatives to fuel-based fishing net indicator ” 2017 IEEE International Conference on Innovations in Green Energy and Healthcare Technologies (IGEHT), Coimbatore, India, 2017, pp. 1-4.doi: 10.1109/IGEHT.2017.8093981
[7] T. Khadem, S. M. B. Billah, S. Barua and M. S. Hossain, "HOMER based hydrogen fuel cell system design for irrigation in Bangladesh," 2017 IEEE 4th International Conference on Advances in Electrical Engineering (ICAEE), Dhaka, Bangladesh, 2017, pp. 445-449, doi: 10.1109/ICAEE.2017.8255397.
[8] S. M. B. Billah and K. K. Islam, "Regenerative braking characteristics of PMDC motor by applying different armature voltage," 2016 IEEE 2nd International Conference on Electrical, Computer & Telecommunication Engineering (ICECTE), Rajshahi, Bangladesh, 2016, pp. 1-4, doi: 10.1109/ICECTE.2016.7879621.
[9] S. M. B. Billah, K. K. Islam and S. Hossain, "Experimental verification of regenerative braking characteristics by applying different motor armature voltage," 2016 IEEE International Conference on Innovations in Science, Engineering and Technology (ICISET), Dhaka, Bangladesh, 2016, pp. 1-4, doi: 10.1109/ICISET.2016.7856525.
[10] A. Mohammad, S. M. B. Billah, S. K. Rahman, O. Ahmed, M. A. Islam and S. A. M. S. U. Amin, "Generation of switching pulses for operating a double purpose converter using microcontroller," 2015 IEEE International Conference on Advances in Electrical Engineering (ICAEE), Dhaka, Bangladesh, 2015, pp. 234-237, doi: 10.1109/ICAEE.2015.7506839.
[11] A. Mohammad and S. M. B. Billah, "Analysis of speed control of series DC motor using diverter and observation of speed saturation point," 2015 IEEE International Conference on Electrical Engineering and Information Communication Technology (ICEEICT), Savar, Bangladesh, 2015, pp. 1-4, doi: 10.1109/ICEEICT.2015.7307350.
[12] A. Moahmmad, M. S. Rahaman, R. Hoque, S. M. Baque Billah and R. R. Hasan, "Analysis of a common circuit structure for operating four power electronic converter circuits," 2015 IEEE International Conference on Electrical, Computer and Communication Technologies (ICECCT), Coimbatore, India, 2015, pp. 1-5, doi: 10.1109/ICECCT.2015.7226010.
[13] S. Barua and S. M. Baque Billah “Promoting Sustainable Development: Solar Energy for the Urban Building Application”.2015 International Conference Mechanical Engineering and Renewable Energy (ICMERE), CUET. doi: https://doi.org/10.13140/RG.2.1.1369.8640
[14] S. Chakraborty, W. Hasan and S.M. B. Billah, "Design and analysis of a transformer less single-phase grid-tie photovoltaic inverter using boost converter with Immittanceconversion topology," 2014 IEEE International Conference on Electrical Engineering and Information & CommunicationTechnology (ICEEICT), Dhaka, 2014, pp. 1-6. doi:10.1109/ICEEICT.2014.6919107.