Embedded Files
TODAY we learned that we are going to designs a gematric motion lamp.
ABOVE ARE THE STEPS WE ARE GOING TO FOLLOW
today we learn we are going to make Bandsaw Boxes.
today we learn we are going to make Bandsaw Boxes.
ABOVE ARE THE CONSRTUCTIONS FOR THE PROJECT I NOTICE THAT THERE ARE SOME ADDITONIAL CONTRUCTION THAT WILL NEED TO BE ACOMPLISHILED FOR MY PROJECT TO BE CONSIDERD.
the purpose of this project is to learn how to use tools safely.
the purpose of this project is to learn how to use tools safely.
ABOVE ARE THE STEPS THAT WE ARE GOING TO TAKE FOR THE PORTION PROJECET
these are the skills we ae expected to have by the end of this project .
these are the skills we ae expected to have by the end of this project .
bandsaw wear safety goggles
bandsaw wear safety goggles
lower drill
move to wood slowly
don't
leave bandsaw on
leave dust
distract someone while using
miter saw
1Keep your fingers at least 6 in. away from blade
2Wear safety glasses
3Don't reach under the blade while it's spinning.
4 do not put plug by blade
5Let the blade come to a complete stop at the end of each cut before lifting it.
do not be a distraction to others while miter saw is on
PRACTICE PUZZLE 1
PRACTICE PUZZLE 1
OUR GROUP FIRST TIME USING THE BAND SAW WE CUT THE WOOD TO MAKE A PUZZLE
PRACTIE PUZZLE 2
PRACTIE PUZZLE 2
PRACTICE PUZZLE WE WERE GOING TO MAKE PUZZLE
we use this to keep are boxes together
planer saw saftety
planer saw saftety
1do not put hand on blade
2 do not distract others while
3make sure vacuum is plug up
4 do not use with protection
5 wear safety glasses
we will use this too spray paint
sanding my box
sand all parts smooth
glue box perimeter back together
glued box together
finish all parts
inside of the box hand sand inside of box
we made cubes in class to practice are skills
geo prototype
cut list
IMG-5178.MOVthis is my led light blinking fast
this is my led light blinking fast
External LED Blinking.MOVget your Pico to blink and saexternal led
get your Pico to blink and saexternal led
we did this to get the led lights to blink we had to put the cords in different places
we did this to get the led lights to blink we had to put the cords in different places
3D DESIGN PROJECT
3D DESIGN PROJECT
THIS IS THE SCHEDULE FOR THIS MINI PROJECT WE HAVE FIVE TOTAL CLASS PERIODS TO COMPLTE THIS PROJECT
CONSTRAINS
CONSTRAINS
THESE ARE OUR PROJECTTS CONSTRAINTS FOR THIS PROJEXT
day 1 consturction
day 1 consturction
progress
day 2
day 2
today we took apart a school security camera we found screws mother board zoom lens camera
day 3
day 3
day 4
day 4
final project
this is my project it is a dollar sign.
the project size constraints were to he less than 18x18x18x and the final
lt was expected that my project was made out of 6 parts or more my project is made of 6 parts.
i give my craftmanship a 7/10 for this project i could have made something better.
y
PULL APART ACTIVITY
CAMERA PULL APART
CAMERA PULL APART
TODAY IN CLASS WE ARE GOING TO TAKE APART THIS CAAMERA. WE KNOW THAT THIS CAMERA CAN DO: TAKE PICTURES RECORD ZOOM MOTHER BORAD COPER WIERES SCRWES MOTOR CAMERA LENS GEARS LAN CABLE GLASS DOME
planned table picture
planned table picture
our new project is to create a laptop mine will have folding legs
cut list
hereis my cut of all of the piceses i need to cut it out
BEFORE
BEFORE
AT THE BEGINNING OF CLASS WE HAD THIS BOARD.
AT THE BEGINNING OF CLASS WE HAD THIS BOARD.
AFTER
AFTER
TODAY IN CLASS WE USED THE BANDSAW TO SLICE THIS BOARD IN HALF/
table saw to cut legs
before
before
before we cut this wood with the table saw
after
after
AFTER WE CUT FOR THE TABEL
assembly with the nail gun and glue
assembly with the nail gun and glue
cuting leg picece with tabel saw
cuting down side pieces with the miter saw
sensor
Breadboard & Jumpers for Testing
2 x Micro Servos
16mm Square Aluminum Tubing Available at Hardware Stores A Wooden Dowel Can Be Used As Well
5 x Clear Plastic Test Tubes
3D Printer & White/Black Filament
Page updated
Report abuse