나노물질의 표면화학을 통한 기능성 소재 제작 및 다양한 응용연구
저희 연구실은 2024년부터 국가지정 미래기술연구실로 선정되어 차세대 e-모빌리티용 고전도성 배선소재를 개발하고 있습니다. 그래핀, 맥신, 탄소나노튜브(CNT) 등의 나노재료의 표면을 화학적으로 기능화하여 균일하게 분산시키는 연구를 수행하고 있습니다. 이렇게 기능화된 전도성 나노재료들은 다양한 용매에서 높은 분산성을 보이며, 특정 농도 이상에서는 흥미로운 특성 변화를 보이게 됩니다. 이러한 나노스케일에서 발생하는 현상을 이용하여, 다양한 전도성 나노소재로 기능성 섬유를 제조하고, 전선소재, 바이오센서, 나노촉매 및 에너지 저장에 응용하는 연구를 수행 중 입니다.
Our laboratory is currently conducting research on the purification and functionalization of carbon nanotubes (CNTs) to achieve high-concentration and uniform dispersion. The functionalized CNTs exhibit excellent dispersibility in various solvents and, notably, form a liquid crystalline (LC) phase even under strong acidic conditions, indicating their exceptional colloidal stability. Based on this phenomenon, we are developing lightweight, high-strength, and highly conductive CNT fibers using LC-phase CNT dispersions. Since 2024, our lab has been designated as a National Future Technology Research Laboratory, focusing on the development of next-generation high-conductivity wiring materials for e-mobility applications.
나노물질을 이용한 환경/생체시료의 레이저 탈착/이온화 질량분석법 연구
저분자량 화합물은 환경과 생명체의 상태를 나타내는 매우 중요한 지표입니다. 이런 저분자량 화합물의 질량분석을 위해서는 환경이나 생체내에 존재하는 다양한 방해물질을 제거하기 위한 복잡한 전처리 과정들이 필요합니다. 저희 연구실에서는 전처리 과정없이 매우 소량의 환경/생체시료를 활용하여 고감도 질량분석을 할 수 있는 레이저 탈착/이온화 질량분석법을 광기능성 나노재료를 기반으로 개발하고 있습니다.
Low-molecular-weight compounds serve as critical indicators of environmental and biological states. However, their mass spectrometric analysis typically requires complex sample preparation procedures to remove various interfering substances. Our laboratory is developing a high-sensitivity mass spectrometric technique based on photoactive nanomaterials, which enables the direct analysis of trace amounts of environmental or biological samples without the need for extensive pretreatment.
최근 레이저 탈착/이온화 질량분석을 이용한 생체시료내의 저분자량 화합물 질량분석은 통계분석과 머신러닝과의 조합을 통하여 질병진단에 활발하게 응용되고 있습니다. 저희 연구실에서는 대량의 질량분석 결과를 토대로 통계분석 및 머신러닝을 수행하여 특정 질병의 진단과 환자의 예후관리에 활용될 수 있는 최신분석법을 연구하고 있습니다.
Recently, mass spectrometric analysis of low-molecular-weight compounds in biological samples using laser desorption/ionization techniques has been actively applied to disease diagnosis through the integration of statistical analysis and machine learning. Our laboratory is developing advanced analytical methods that leverage large-scale mass spectrometry datasets combined with statistical and machine learning approaches, aiming to enable accurate disease diagnosis and effective patient prognosis management.
이차전지 전극소재 및 재료 구조의 레이저 탈착/이온화 질량분석
이차전지의 4대 구성요소는 양극재, 음극재, 분리막, 전해질 입니다. 저희 연구실에서는 이차전지 구성요소들의 화학구조 및 품질을 분석할 수 있는 새로운 질량분석법을 개발하고 있습니다. 레이저 탈착/이온화 질량분석법을 이용하여 전기화학반응에서 발생하는 소재들의 구조변화를 분석하고, 질량분석 이미징을 통하여 전극소재의 표면에서 위치에 따른 구조정보를 얻고자 합니다.
The four key components of secondary batteries are the cathode, anode, separator, and electrolyte. Our laboratory is developing novel mass spectrometric techniques to analyze the chemical structures and quality of these battery components. Using laser desorption/ionization mass spectrometry, we aim to investigate structural changes in materials induced by electrochemical reactions. Additionally, through mass spectrometry imaging, we seek to obtain spatially resolved structural information on the surfaces of electrode materials.
다양한 나노재료를 이용한 친환경 수처리 및 중금속 제거 응용
급격한 산업화로 인해서 지구의 환경은 나날이 위협을 받고 있습니다. 안정적인 수자원 확보를 위한 화학적 수처리는 미래 세대를 위해서 매우 중요합니다. 저희 연구실에서는 다양한 나노소재를 이용한 섬유, 필름, 필터를 제작하여, 화학물질이나 중금속으로 오염된 물을 마실 수 있는 깨끗한 물로 바꾸기 위한 연구를 수행하고 있습니다. 이런 연구는 향후 원자력, 반도체 및 이차전지 공정에서 발생하는 방사성 원소나 중금속제거에 활용이 가능합니다.
Rapid industrialization has increasingly threatened the Earth's environment. Chemical water treatment for the secure and sustainable supply of clean water is critically important for future generations. Our laboratory is developing advanced fibers, films, and filters based on various nanomaterials to purify contaminated water containing hazardous chemicals or heavy metals. This research holds great potential for future applications in removing radioactive elements or heavy metals from industrial processes such as nuclear power, semiconductor manufacturing, and secondary battery production.