The college now credit for this class is associated with producing proper engineering drawings, created using appropriate engineering standards. To earn College Now credit in this course, you must demonstrate proficiency at CAD drafting. As you know this year we are using SolidWorks for a variety of things. Students wishing to earn four LBCC credits for EG 4.4.07: Introduction to CAD, simply complete the normal assignments for the class, with the addition of passing a final proficiency test.
LBCC Learning Outcomes state that students earning credit for EG4.407 will be able to :
The requirements and all materials necessary to earn these credits will be posted on this page and updated as the class continues. Occasionally, a student's attendance at A/O or during lunch may be required, but this will not be often, if at all. As always, students are welcome to come see the instructors whenever assistance is required.
Drawing Standards (1/30/19). This document is the same document currently being used in the class, and lists all of the drawing standards that must be used whenever producing a drawing using Solidworks. These standards will be explained during the course as necessary. Any student pursuing CN credit should try and comply with all of these standards for ALL the drawings you complete for this class for the duration of the year. Practice makes perfect!
CN Assignment 1: Students are to submit the Riser, Step Block, Wedge Block, and Linkage drawings, meeting all drawing standards above for their drawings. (DUE On Calendar of Class Web Site.)
CN Assignment 2: Personal Mug Drawing (DUE 1/28)
CN Assignment 3: Wind Spiner Drawing (DUE 2/10)
CN Assignment 4: Associated with making drawings for 2nd Semester Project #1 (DUE TBA)
CN Assignment 5: Associated with making drawings for 2nd Semester Project #2 (DUE TBA)
CN Final Proficiency Test (to be given on 6/11/20). Sometime between 6/1 and 6/11, students are to come in and look at the block of wood that they will prepare a drawing for during the final test. Students will be allowed to measure all dimensions for this block and write them down on their own paper. Students may even sketch (by hand) the three views of this block and fully dimension it ahead of time. However, students may not model this block in Solidworks prior to the test (Mr. K will collect the student's note sheet with the measured dimensions until the day of the test). On Thursday, June 11th, students will be given the entire period (if needed) to model and produce a proper scaled drawing on 11 x 8.5 paper. The drawing produced must meet all of the Drawing Standards listed above. There will be no redo's for this test.