Design

How to build the demo:

1. Cut your PVC pipe to the desired length.

2. Connect your bilge pump to a small piece of PVC.

3. Connect that to an elbow facing downwards.

4. After, connect that to a longer piece of piping that will make it so when you attach another elbow the pipe will rest on the ground.

5. Attach your filter and make sure to use a piece of fabric so nothing goes though the system.

6.Place another elbow parallel to the ground

7. Here, you can place some PVC to connect your one way valve to the project.

8. Place a tee (of PVC) with the extra side facing out.

9. Put a valve on the side so you have a way to release the water you have.

10. Have an elbow facing up towards the sky where you can place clear pipe that will show how much water you have pumped.

11. Finally, glue everything together to make it water tight!