Academic Qualification

Doctor of Philosophy: In Manufacturing Processes and Automation Engineering from Netaji Subhas Institute of Technology (affiliated to Delhi University) sector 3, Dwarka, New Delhi.

Master of Technology: In Manufacturing Science and Technology from Mechanical Engineering Department, Bundelkhand Institute of Engineering and Technology (affiliated to AKTU), Jhansi, India.

Bachelor of Technology: In Mechanical Engineering from Shri Ramswaroop Memorial College of Engineering and Management (affiliated to AKTU), Lucknow, India. 

Thesis/Project Details

Ph. D

Topic: Surface Modification through Friction Stir Processing (FSP).

Description: Detailed study of microstructural evolution, mechanical and surface property enhancement using hybrid reinforcement through friction stir processing in AA5083 alloy was thoroughly discussed.

M. Tech.

Microstructure and Wear Behavior of Dual Phase Steel Processed by Multiaxial Compression.

Description: This work has investigated the microstructural and wear behavior of dual phase medium carbon steel (AISI1040) processed by multiaxial compression process.

B.Tech.

Development of Forklift using chain drive

Description: The project involved detailed study of forklift, counter weight analysis and fabrication of forklift along with the component description, advantages, limitations, safety precautions, implementations and future scope of forklift.

Publications

1.     Dwivedi, P., Siddiquee, A. N., & Maheshwari, S. (2021). Issues and requirements for aluminum alloys used in aircraft components: state of the art. Russian Journal of Non-Ferrous Metals, 62, 212-225. [SCIE, IF-0.9]

2. Dwivedi, P., Maheshwari, S., Abidi, M. H., Siddiquee, A. N., Haider, J., & Alkhalefah, H. (2022). Toward devising pilot experiments to establish parameter window for FSP of aluminum alloys. Advances in Mechanical Engineering, 14(6), 16878132221108268. [SCIE ,IF-2.1]

3.  Dwivedi, P., Maheshwari, S., & Siddiquee, A. N.. Fe-SiC-Sn-Mn Reinforced Surface Composite via FSP: A Comprehensive Analysis. Materials Today Communications, 105783. (2023). [SCIE, IF-4.5]

4. Dwivedi, P., Maheshwari, S., & Siddiquee, A. N. (2024). Microstructure and Mechanical Properties of SiC+ Fe+ Mn+ Sn Hybrid Reinforced Surface Composites Fabricated by Friction Stir Processing: Effect of Double Pass. Metals and Materials International, 1-12. [SCIE, IF-4.0]

5.  Dwivedi, P.; Padap, A.K.; Maheshwari, S.; Mohammad, F.K.; Mohsin, M.E.A.; Hossain, S.S.; Altammar, H.; Siddiquee, A.N. Enhancing the Mechanical Performance of Dual-Phase Steel Through Multi-Axis Compression and Inter-Critical Annealing. Materials 2025, 18, 3139. [SCIE, IF-3.2]

6. Verma, A., Kusumakar, C., Gupta, S., Upadhyay, A.,Meena, A. Maheshwari, S.,,Dwivedi, P. (2025), "Experimental Investigation of Underwater Friction Stir Welded AA1100: Effect of rotational speed", Russian Journal of Non-Ferrous Metals. [SCIE, IF-0.9]

7.  Dwivedi, P., Maheshwari, S., Siddiquee, A.N. (2025). Fabrication Techniques and Characterisation for Zinc-Based Biodegradable Implants. In: Dixit, A., Kumar, A., Pathak, D.K. (eds) Biodegradable Metallic Materials. Biomedical Materials for Multi-functional Applications. Springer, Singapore. 

Conference Proceedings

1.  Dwivedi, P., Maheshwari, S., & Siddiquee, A. N., Qutubuddin S.M. Surface Modification through Friction Stir Processing (FSP).In Proceedings of the International Conference on Industrial Engineering and Operations Management 2024  (pp. 1-8). [IEOM-2024].

2. Dwivedi, P., Maheshwari, S., & Siddiquee, A. N. (2022). Investigation on aluminum based surface composite through FSP using metal (Fe-Sn-Mn) and ceramic (SiC) reinforcements. Materials Today: Proceedings, 62, 251-254. [ICAMME-2022].

3. AAl5083 and Hybrid Reinforcements Based Surface Composite via FSP: Microstructural and Mechanical Property Evolution [ICSMMIE-2022].

FDP / Workshops

1. Three days workshop on “Machine Minds- Exploring AI for next Generation” (15th- 17th April 2026).

2. 2. Three days Compact Course on “Harmonic Analysis and integral Transform Techniques. (17th -19th February 2026).

3. Five days Faculty Development Programme on ‘Teaching with Technology: Integrating Characterization Tools in Curriculum’ organized at the Department of Mechanical Engineering GLA University, from 30th May to 3rd June 2025.

4. Participated in AICTE IDEA Lab Tech Fest 2025.( 7th March 2025)

5. Five days short term course on “Recent Advances in Additive Manufacturing: Fundamental to Applications”(RAAM-2024 organised by NIT Kurukshetra from 13th November to 17th November 2024.

6. Four week Faculty Development Programme on Machining Science organized by NPTEL-AICTE.

7. Webinar on “Recent Advances in Welding” organized by The Indian Institute of Welding on 10th May 2020.

8. Six days course on “Microstructural Evolution during Friction Stir Processing” organized by Indian Institute of Technology Gandhinagar from 16th September to 21st September 2019.

9. Five days Faculty Development Programme on Recent Trends in Mechanical Engineering (Sponsored by TEQIP-II) organized at the Department of Mechanical Engineering, B.I.E.T., Jhansi from 21st   March to 25th March 2017.

10. Two days workshop on “Virtual Instrumentation in Mechanical Engineering” (Sponsored by TEQIP-II) organized at the Department of Mechanical Engineering, B.I.E.T., Jhansi from 29th   March to 30th  March 2017.

Teaching Experiences

1. Assistant Professor in Bharati Vidyapeeth’s College of Engineering , New Delhi (Aug 2025- Till now).(Subject Taught: Manufacturing Process and Engineering Mechanics Lab: Engineering Graphics 1&2 and Workshop to 1st year students),

2. Assistant Professor at Inderprastha Engineering College, Ghaziabad (Oct 2024-July 2025). (Subject taught: Manufacturing Science and Workshop).

3. Guest faculty at Delhi Technological University, New Delhi (Jan 2024-Oct 2024). (Subject taught: Manufacturing Technology-2, Engineering Material and Metallurgy, Metal Forming and Metal Cutting Lab)

4. Assistant Professor at Sachdeva Institute of Technology, Mathura (Jan 2018 -Aug 2018). (Subject taught: Manufacturing Science and Material Science)

Achievements and Certification

1. 1. Successfully completed 12 week NPTEL Certification in “Introduction to Material Science and Engineering”.

   2.  Successfully completed 4 week NPTEL Certification in “Machining Science” with an Elite+ Silver grade (Topper)

   3. Trained more than 500 school students in 3D designing and printing.

   4. Awarded with Third prize in Doctoral dissertation competition sponsored by Airbus in 𝟏𝟒𝐭𝐡 𝐀𝐧𝐧𝐮𝐚𝐥 𝐈𝐧𝐭𝐞𝐫𝐧𝐚𝐭𝐢𝐨𝐧𝐚𝐥 𝐂𝐨𝐧𝐟𝐞𝐫𝐞𝐧𝐜𝐞 𝐨𝐧 𝐈𝐧𝐝𝐮𝐬𝐭𝐫𝐢𝐚𝐥 𝐄𝐧𝐠𝐢𝐧𝐞𝐞𝐫𝐢𝐧𝐠 𝐚𝐧𝐝 𝐎𝐩𝐞𝐫𝐚𝐭𝐢𝐨𝐧𝐬 𝐌𝐚𝐧𝐚𝐠𝐞𝐦𝐞𝐧t held in Dubai (14th Feb, 2024)

   5. GATE 2013, 2014, 2015 and 2016 qualified.[GATE 2013- 96.6 percentile]

   6. ANSYS Training: An easy introduction with Application by Udemy, May 2020.

   7. Participated in a National-level science exhibition during school time.

Roles and Responsibility

1. Serving various roles in departmental committees like Exam Cell, OMR Committee and Data Collection Committee in BVCOE New Delhi.

2.  Served as a Reviewer in various journal like Scientific Reports, Progress in Additive Manufacturing, MaterialsToday Proceedings etc.

3. Convener of International Conference on Emerging Trends in Multidisciplinary Research (2025) organized by IPEC Ghaziabad.

4.  Co-coordinator of AICTE IDEA Lab in IPEC Ghaziabad.

5.  Co-coordinator of IPEC Summer School and member in Research Committee in IPEC Ghaziabad.

6.  Worked as an organizer in various cultural college events (2009-2012).

7.  Worked as a Mess In-charge in the girl hostel of BIET Jhansi (2016-2017).

Software Proficiency

• Microsoft Office

• Origin for graphical analysis

• Minitab for optimization

• ImageJ for microstructural analysis

• Match 3.0 for XRD analysis

• Techplot for contour mapping

• Ansys Workbench

• AutoCad

• Solidworks

• RD Works 

• Onshape