Laser Tag
Sahana Moogi, Diego Padilla, Yael Zayats
Embedded Files
Overview
This set of 2 boards (originally made in KiCAD as 1 board, then cut in half), is a laser tag gun and reciever. We use an IR LED and IR reciever to connect the two while shooting.
For use, many parts are angled in order to be able to use them in a 3D printed gun-shaped box and holder.
Fully Built Boards
Fully Built Boards
Left board is the gun, right board is the reciever
Reciever Schematic
Reciever Schematic
Gun Schematic
Gun Schematic
Reciever Layout
Reciever Layout
Gun Layout
Gun Layout
Issues
Issues
We used the wrong footprints for a few of our pieces, including the battery holder, atmega, and button. We were able to hardwire most of these parts by doing some really sketchy soldering, but the atmega is proving to be a problem due to the small soldering pads
Our mousebites didn't work! We ended up cutting the boards manually
Future Work
Future Work
Create and print the 3D holders
solder on the atmega properly
coding!
Page updated
Report abuse