Whatsapp Now
FEATURES
Superior nano grain structure raw material
Multilayer coating for Hardened moulds
Ideal Chip flow geometry
Close tolerance end mills for finishing for higher accuracy
No EDM required as milling is a much faster operation
Operates at high cutting speeds on hardened materials
RANGE
Standard 0.1mm- 25mm available in stub/standard/long/extra long/ long reach
Specials 0.1mm- 32mm available in stub/ standard/long/extra long/ long reach
FEATURES
Variable pitch and Variable helix
Stable core geometry
Optimized centre cutting geometry
New generation coating
Higher productivity
Ability to work at high Parameters due to the reinforced core.
Superior Tool Life.
Excellent Surface Finish.
RANGE
Standard Roughing 3mm- 20mm / Standard Finishing 0.4mm-12mm
Special- 0.4mm-25mm
FEATURES
Superior nano grain structure raw material
Multilayer coating for Hardened moulds and Diamond Coating for graphite milling
Wear resistant grade
Ideal Chip flow geometry
Close tolerance end mills for finishing for higher accuracy
Special Roughing Pitch for graphite roughers
No EDM required as milling is a much faster operation
Operates at high cutting speeds on hardened materials
Polishing for hardened dies can be minimized
No need of multiple setups, Job can be finished with single clamping and it is much easy to achieve high accuracy
Higher Tool Life and consistency
High Productivity
Superior Surface finish in graphite moulds
RANGE
Standard 0.1mm- 25mm available in stub/standard/long/extra long/ long reach
Specials 0.1mm- 32mm available in stub/standard/long/extra long/ long reach
END MILLS FOR GRAPHITE MILLING
FEATURES
Variable pitch and Variable helix
Stable core geometry
Optimized centre cutting geometry
New generation coating
Available in 4 Flutes, 5 Flutes, 6 Flutes and 7 Flutes
Available with Neck options
Higher productivity
Reinforced core gives the ability to work at higher parameters. Superior Tool Life.
Excellent Surface Finish.
High MRR
RANGE
Standard 6mm – 20mm
Specials 1.5mm – 25.4mm
END MILLS FOR HIGH TEMP ERATURE ALLOYS (TURBO -TR)
FEATURES
Excellent choice for application on variety of material
Special nano grain carbide raw material with an optimum balance of hardness and toughness
Special geometry better feed rates and longer tool life
High performance TiAlN coating for superior wear resistance
FUNCTIONS & BENEFITS
Best value for money
Best Suitable for Steel, Stainless Steel, Cast iron, Aluminium
RANGE
Standard 1mm to 25mm available in stub/standard/long/extra long/ long reach
Specials 0.3mm to 32mm available in stub/standard/long/extra long/ long reach
END MILLS FOR GENERAL PURPOSE
FEATURES
3-4 Flutes
Center Cutting
Sinosoidal Pitch
Superior Coating
FUNCTIONS & BENEFITS
High MRR
Stable cutting at high cutting speeds
Superior Tool Life
RANGE
Standard 8mm – 20mm available in standard
Specials 6mm – 25.4mm available in standard
FEATURES
Robust Core Design
Multiflutes for High Productivity
Available with alternate coating
FUNCTIONS & BENEFITS
Operates at high cutting speeds
Geometry programmed to suit adequate material removal at various enagemnet angles
Highest dynamic speed rates
Highest material removal rate
Least cutting forces
Prolonged tool life due to reduced shock
High savings in cycle time when compared to the conventional milling strategy
RANGE
Standard Roughing 3mm- 20mm
Special- 3mm-25mm
Thread milling is a secure machining operation with less chances of part damage and breakage of the tool
Threading in difficult to machine materials and hard materials is easy
Higher thread quality: The cutting conditions are extremely good when you are thread milling. The result of the thread is a higher quality of surface finish, tolerance, angle, etc. Compared with other threading methods.
Flexible tool: Same cutter can be used for right hand and left hand thread. Threads with different diameters can be made with the same tool as long as the pitch is the same. The same thread mill can be used for blind holes and through hales.
Threading in blind holes: When thread milling you will get a complete thread profile to the bottom of the hole. When tapping its necessary to drill much deeper as its not until the third thread the tap will make a complete thread profile.
Less wear on the machine spindle: Thread milling will give you longer life to the machine spindle compared with tapping as the rotation on the spindle doesn’t need to be stopped and reversed for every thread.
Energy-saving production: Law energy consumption as the machine spindle doesn’t need to be stopped and started after each thread.
Thread milling in a lathe with live tools: Reduced machining time compared with thread turning, excellent chip control