*CLEARANCE RACK* NOW HALF OFF ON ALL MISC ITEMS!!! DOOR KNOBS, KNOCKERS, LIGHT BULBS & ETC
1st – Measure your door:
· The actual door size does not include the frame.
· The door opening without the frame or door is known as a rough opening.
· Frames add 1 ½" in total to your new door.
· If you are measuring just an opening: You need at least ½" for your installer to level your new door in to the rough opening. So, to calculate your actual door size you subtract 1 ½" (frame) + ½" (needed for leveling), in total we subtract 2” from what is known as the rough opening. This gives you your actual door size. 2”- Rough opening = Actual door size.
ROUGH OPENING
2nd –Find your Door’s Swing:
· Swing refers to how the door “swings” open.
· There are many ways to tell the swing, many of which will confuse you! The easy way to think of it is to go by where the hinges are.
· Stand outside the room the door is for. Looking at the door from outside the room, what side are the hinges on? That is your door’s swing.
· Keep in mind that most doors open inwards with hinges only visible once the door is open.
· With the occasional exception of closets, pantries or some restrooms that open outward. Simply put, these doors are installed backwards. -If you can see the hinge from outside the room with the door closed. That is a sign the door was installed backwards. In conclusion if you’re standing outside the door with the hinges visible while the door is closed and the door swings out to the right or left the door swing is the opposite.
· If its easier to remember, if a door swings out the swing is based on what side the door knob is on.
Finally, once we know our door’s size and swing you are set to order your new door.
Things to keep in mind:
« Your installer can more easily install a door smaller than the rough opening, typically at least ½" smaller to have enough room to level it in to place. (Frames move with the house foundation!) your installer can always add shims to the space left if the door is not exactly ½" smaller than the rough opening. Which is a lot less complex than having to make the opening bigger for your new door.
« Standard interior doors have about 1” of space at the bottom to allow for ventilation. Unless specifically requested to be minimized that is how the door comes and is more noticeable when you have hard floors vs having carpet.
« Standard door height is 80” which is 6’. What typically varies is the width of the door which only exists in even numbers from 18” - 36” anything wider than 36” is typically a French door.
EXTERIOR DOOR SWING