Festool Track Saw

Setup

1. Plug in and turn on Festool Vacuum

2. Set up table and track 

   1. Lay material on table with the marked cut line perpendicular to the fence

   2. Put track down onto material, and adjust the height of the track so that it fits flush on material 

3. Take Festool Track Saw out of its case, and place it on the track

4. Set Blade depth:

1. Move material so that the edge of the material lines up with the edge of the track 

2. Pull up “Fast Fix” lever to allow blade to come down

3. Press green button to adjust depth to material thickness

   1. The “FS” tab is the tab we use to set the depth of the blade

   2. Use the blade screw on the green button to make small adjustments 

4. While pressing the blade down all the way, look to see that the blade teeth go past the material 1/16” 

5. Push down the “Fast Fix” lever 

5. Adjust the Splitter Guard by loosening black screw and bring the guard down to the surface of the material, then tighten up screw

6. Twist the vacuum hose into the track saw

7. Plug track saw into the outlet on the vacuum