DI — Aligned Dimension
Creates an aligned dimension
DL — Detail Line
Creates view specific lines
EL — Spot Elevation
Displays the elevation of a selected point
FR — Find / Replace
Find and replace
GP — Model Group: Create Group / Detail Group: Create Group
Creates a group of elements
RT — Tag Room / Room Tag
Applied taps to elements based on their categories
TX — Text
Adds Text
AA — Adjust Analytical Model
Adjusts the analytical model of the structural member in relation to those of the elements to which it joins
DC — Check Duct Systems
Examines the mechanical systems in a project to verify that each system is assigned to a user defined system, and properly connected.
EC — Check Circuits
Verifies all circuits for proper connections to panels and valid system assignments
LD — Loads
Applies point, line and area loads to a model
LO — Heating and Cooling Loads
Prepares a heating and cooling load analysis report based on an existing building model
PC — Check Pipe Systems
Examines the piping system in a project to verify that each system is assigned to a user defined system, and properly connected
PS — Panel Schedules
Generates a panel schedule for a specific panel
RA — Reset Analytical Model
Restores the analytical model alignment methods to autodetect
CL — Column / Structural Column
Adds a vertical load-bearing element to the building model
CM — Place a Component
Place a component
DR — Door
Adds a door to the building model
GR — Grid
Places column grid lines in the building design
LL — Level
Places a level in view
RM — Room
Creates a room bounded by model elements and separation lines
RP — Reference Plane
Creates a reference plane using drawing tools
RT — Tag Room / Room Tag
Tags the selected room
SB — Floor / Floor: Structural
Adds structural floors to a building model
WA — Wall
Creates a non-bearing wall or a structural wall in the building model
WN — Window
Places a window in a wall or a skylight in a roof
ER — Editing Request
Displays a list of users’ request to borrow elements in worksets, as well as pending request
RL or RW — Reload Latest
Loads the latest version of the central model
MP — Move to Project
Move the model relative to a shared coordinated system
R3 — Define a New Center of Rotation
Relocates center of rotation when rotating elements
RA — Restore All Excluded
Restores all excluded parts and elements
RC — Repeat Last Command
Repeats the last command
SA — Select All Instances: In Entire Project
Selects all of the elements that are similar to the selected element in the current view, or throughout the project
// — Divide Surface
Applies a division grid along a surface in a conceptual design
AA — Adjust Analytical Model
Adjusts the analytical model of the structural member in relation to those of the elements to which it joins
AD — Attach Detail Group
Creates an attached detail group
AP — Add to Group
Adds elements to a group
BS — Structural Beam System / Automatic Beam System
Creates a layout that is used to control the number and spacing of a series of parallel beams
CG — Cancel
Cancels an action
DI — Aligned Dimension
Creates an aligned dimension
EG — Edit Group
Edits a group
EL — Spot Elevation
Displays the elevation of a selected point
EP — Edit Par
Edits a part element
EU — Unhide Element
Enables a hidden element to appear in view
EW — Edit Witness Lines
Edits a witness line
FG — Finish
Finished editing a group
HT — Show Help Tool Tip
Displays the Help Tooltip
JP — Justification Points
Sets a justification point for relocating elements
JY — Zoffset
Offsets an element in the z direction
JZ — Show Help Tool Tip
Displays the Help Tooltip
LI — Model Line / Boundary Line / Rebar Line
Places a new line
PP or Ctrl +1 or VP — Properties / Toggle Properties Palette
Toggles the properties palette
RA — Restore All Excluded
Restores all excluded parts and elements
RG — Remove From Group
Removes elements from a group
RH — Toggle Reveal Hidden Elements Mode
Toggles the Reveal Hidden Elements Mode
RP — Reference Place
Creates a reference plane using drawing tools
UG — Ungroup
Ungroups members of a group
VU — Unhide Category
Enables a hidden category to appear in view
CM — Place a component
Place a component
D — Aligned Dimension
Creates an aligned dimension
FR — Find / Replace
Find and replace
GP — Model Group: Create Group / Detail Group: Create Group
Creates a group of elements
LI — Model Line / Boundary Line / Rebar Line
Places a new line
LL — Level
Places a level in view
MD — Modify
Enters selection mode to select elements to modify
PP or Ctrl +1 or VP — Properties / Toggle Properties Palette
Toggles the properties palette
RP — Reference Plane
Creates a reference plane using drawing tools
TX — Text
Adds Text
ES — MEP Settings: Electrical Settings
Accesses dialog box to specify wiring parameters, voltages definitions, distribution systems, cable tray and conduit settings, and load calculation and circuit numbering settings
MS — MEP Settings: Mechanical Settings
Accesses dialog box to configure component sizes, and the behavior and appearance of the mechanical systems
SU — Additional Settings: Sun Settings
Opens the sun settings dialog box
UN — Project Units
Opens the Project Units tool
AL — Align
Aligns one or more elements with selected element
AR — Array
Creates a linear or radial array of selected elements
CO or CC — Copy
Copies selected element(s)
CP — Cope / Apply Coping
Applies coping to steal mean or columns
CS — Create Similar
Creates an element of the same type as the selected element
DE — Delete
Removes selected element(s) from the building model
DI — Aligned Dimensions
Creates an aligned dimension
DM — Mirror: Draw Axis
Reverses the position of a selected model element, using a user generated line as the mirror axis
EH — Hide In View / Hide Element
Hides an element from view
EL — Spot Elevation
Displays the elevation of a selected point
EOD — Override Graphics In view: Override by element
Changes the graphic display settings for selected elements in the current view
LI — Model Line / Boundary Line / Rebar Line
Places a new line
LW — Linework
Overrides the line style of selected line in the active view only
MA — Match Type Properties
Opens the Match Type tool to convert one or more elements to match the type assigned to another element
MM — Mirror: Pick Axis
Reverses the position of a selected model element, using a selected line as the mirror axis
MV — Move
Moves a selected element
OF — Offset
Moves a selected model line, detail line, wall, or beam a specified distance perpendicular to its length
PN — Pin
Locks a model element in place
PP or Ctrl +1 or VP — Properties / Toggle Properties Palette
Toggles the properties palette
PT — Paint
Opens the Paint tool
RC — Cope: Remove Coping
Removes Coping
RE — Scale
Resizes the selected element
RO — Rotate
Rotates selected element around an axis
RP — Reference Plane
Creates a reference plane using drawing tools
SF — Split Face
Divides the face of an element into regions for application of different materials
SL — Split Element
Cuts an element (such as a wall or line) at selected point
TR — Trim / Extend to Corner
Trims or extends one or more elements to form a corner
UP — UnPin
Unpins al element that is locked in a position or an element that is driven by its host system
VH — Hide In View: Hide Category
Hides an element category from view
32 — 2D Mode
Navigates the view using only 2D navigation options
3F — Fly Mode
Simulates flying through a model
3O — Object Mode
Navigates an reorients the view in the direction of the controller cap
3W — Walk Mode
Simulates walking through a model
ZA — Zoom All to Fit
Zooms to fit all in view
ZE or ZF or ZX - Zoom to fit
Zooms to fit
ZO or ZV - Zoom Out (x2)
Zooms out the project view by 2
ZP or ZC — Previous Pan / Zoom
Returns to previous pan or zoom
ZR or ZZ — Zoom in Region
Zooms to a region
ZS — Zoom Sheet Size
Zooms to sheet size
PC — Snap to Point Clouds
Snaps to point clouds
SC — Centers
Snaps to center
SE — Endpoints
Snaps to endpoints
SI — Intersections
Snaps to intersection
SM — Midpoints
Snaps to midpoint
SN — Nearest
Snaps to nearest
SO — Snaps Off
Turns snaps off
SP — Perpendicular
Snaps to perpendicular
SQ — Quadrants
Snaps to quadrant
SR — Snap to Remote Objects
Snaps to objects that are not near the element
SS — Turn Override Off
Turns off override feature
ST — Tangents
Snaps to tangent
SW — Work Plane Grid
Snaps to the work plane grid
SX — Points
Snaps to points
BM — Structural Framing: Beam
Adds a load-bearing structural beam element to the building model
BR — Structural Framing: Brace
Adds diagonal members that are connected to beams and columns
BS — Structural Beam System / Automatic Beam System
Creates a layout that used to control the number and spacing of a series of parallel beams
CL — Column / Structural Column
Adds a vertical load-bearing element to the building model
CM — Place a Component
Place a component
FT — Structural Foundation
Creates a wall foundation for the building model
GR — Grid
Places column grid lines in the building design
LL - Level
Places a level in view
RN — Reinforcement Numbers
Defines or edits numbering sequences by partition for rebar and fabric sheets
RP — Reference Plane
Creates a reference plane using drawing tools
SB — Floor: Structural
Adds structural floors to building model
WA — Wall / Wall: Architectural
Creates a non-bearing wall or structural wall in the building model
AT — Air Terminal
Places a register, grille or diffuser
CM — Place a Component
Place a component
CN — Conduit
Draws a rigid conduit run
CT — Cable Tray
Draws a cable tray run
CV — Convert To Flew Duct
Converts a section of rigid duct to flexible duct
DA — Duct Accessory
Adds duct accessories, such as dampers, in duct systems
DF — Duct Fitting
Places duct fittings (elbows, tees, end caps, and so on) in duct systems
DT — Duct
Draws ductwork in the building model
EE — Electrical Equipment
Places electrical equipment, such as panels and switch gear
EW — Arc Wire
Draws an arced wire run
FD — Flex Duct
Draws flexible ductwork in the building model
FP — Flex Pipe
Draws flexible pipes
LF — Lighting Fixture
Adds a lighting fixture element
ME — Mechanical Equipment
Places mechanical equipment such as boilers, furnaces or fans
NF — Conduit Fitting
Places conduit fittings
PA — Pipe Accessory
Adds pipe accessories
PF — Pipe Fitting
Draws a pipe fitting in a piping system
PI — Pipe
Draws rigid piping
PX — Plumbing Fixture
Places a plumbing fixture
RP — Reference Plane
Creates a reference plane using drawing tools
SK — Sprinkler
Places a sprinkler
TF — Cable Tray Fitting
Places cable tray fittings
FN9 — System Browser
Finds components that are not assigned to a system
KS — Keyboard Shortcuts
Assigns key sequence to tools
PP or Ctrl+1 or VP — Properties / Toggle Properties Palette
Toggles the properties palette
RD — Dender in Cloud
Renders 3d views online
RG — Render Gallery
Enables access to multiple versions of renderings, render images as panorama, change rendering quality, and apply background environments to rendered scenes
RR — Render
Creates a photorealistic image of the building model
TL — Thin Lines
Displays all lines on the screen as a single width, regardless of zoom level
VG or VV — Visibility / Graphics
Controls the visibility and graphic display model elements, datum elements, and view specific elements for each view in a project
WC — Cascade windows
Arranges all open windows in a series in the drawing area
WT — Tile Windows
See all open views at the same time
CX— Toggle Reveal Constraints mode
Toggles the constraints in a view
GD — Graphics Display Options
Opens the Graphics dialog box
HC — Hide Category
Hides all selected categories in the view
HH — Hide Element
Hides an element from view
HI — Isolate Element
Isolates selected elements
HL — Hidden Line
Displays the image with all edges and lines drawn except those obstructed by surfaces
HR — Reset Temporary Hide / Isolate
Restores any temporarily hidden elements or categories
IC — Isolate Category
Isolates selected categories
RD — Render in Cloud
Renders 3D views online
RG — Render Gallery
Enables access to multiple versions of renderings, render images as panorama, change rendering quality, and apply background environments to rendered scenes
RH — Toggle Reveal Hidden Elements Mode
Toggles the Reveal Hidden Elements Mode
RR — Render
Creates a photorealistic image of the building model
RY — Ray Trace
Opens Ray Trace visual style, enabling a photorealistic rendering mode that allows panning and zooming around the model
SD — Shaded With Edges
Applies a shaded edge
WF — Wireframe
Displays the image of the model with all edges and lines drawn, but with no surfaces drawn
Last updated by Abigail Green - November 2024