Embedded Files
A.Dissertation/Thesis
PhD, Dissertation, 2011 “Statistical Modeling of machining parameters for predicting of surface roughness values using knowledge based system for Nickel based Hastelloy C-276” University Tenaga Nasional, Malaysia.
MSc, Dissertation, 1992 ‘Study the effect of exit and foot formation in intermittent turning’ University of Technology, Iraq.
B.Article/Papers in Journals
1.Basim A. Khidhir, Ayad F. shahabb, Sadiq E. Abdullaha, Barzan A. Saeeda “Investigate and modeling the machinability of Al 6061 by Response surface methodology” 3rd international conference on design and concurrent engineering 2014 (iDECON), Melaka, Malaysia.
2.Diyar I. Ahmed, S. Kasolang, Basim A. Khidhir, "Analysis of Factors Interaction for Maximum Oil-Film Pressure in Hydrodynamic Journal Bearing" accepts for publication in the Caspian Journal of Applied Sciences Research (CJASR), 2013.
3.M.H. Ali, B. Mohamed, M.N.M. Ansari, G.H.K. Rao, B. A. Khidhir "Finite Element Modeling investigation On the Effect of Nose Radius on Machining Parameters for Titanium (Ti-6Al-4V) Alloy" TechConnect World 2012, June 18-21, Santa Clara, California.
4.Diyar I. Ahmed, S. Kasolang, Basim A. Khidhir, B. F. Yousif. Application of Fuzzy Logic Approach to Predict Oil-Film Pressure in Journal Bearing. International Conference on Advances in Mechanical Engineering 2013.
5.Diyar I. Ahmed, S. Kasolang, Basim A. Khidhir, B. F. Yousif. Application of Response Surface Methodology to Predict Oil-Film Frictionin Journal Bearing. International Conference on Advances in Mechanical Engineering 2013.
6.Diyar I. Ahmed, S. Kasolang, Basim A. Khidhir, B. F. Yousif. Application of Response Surface Methodology to Predict Oil-Film Pressure in Journal Bearing. IEEE Business Engineering and Industrial Applications Colloquium 2013.
7.Diyar I. Ahmed, S. Kasolang, Basim A. Khidhir, B. F. Yousif. Comparison of Response Surface Model with Fuzzy Logic in Predictingthe Oil-Film Pressure in Journal Bearing. IEEE Symposium on Humanities, Science and Engineering 2013.
8.Diyar I. Ahmed, S. Kasolang, B. F. Yousif, Basim A. Khidhir. Viscosity Fitting of Environmentally Friendly Lubricant into the Industrial Lubricant using Soybean Oil as a Base Stock. 13th International Conference on Environmental Science and Technology (CEST 2013).
9.Diyar I. Ahmed, S. Kasolang, Basim A. Khidhir, B. F. Yousif. Fuzzy Logic based Model to Predict the Oil-Film Pressure in Journal Bearing. Journal of Tribology. (ISI-cited publication). Under Review.
10.Diyar I. Ahmed, S. Kasolang, Basim A. Khidhir, B. F. Yousif. Prediction of Oil-Film Pressure in Journal Bearing using Response Surface Methodology. Probabilistic Engineering Mechanics. (ISI-cited publication). Under Review.
11.Diyar I. Ahmed, S. Kasolang, Basim A. Khidhir, B. F. Yousif. Fuzzy Logic and Response Surface Methodology based Prediction Model for Oil-Film Pressure in Journal Bearing. Applied Soft Computing. (ISI-cited publication). Under Review.
12.Diyar I. Ahmed, S. Kasolang, Basim A. Khidhir, B. F. Yousif. Modeling and Prediction of Oil-Film Friction in Journal Bearing based on Response Surface Methodology. Scientia Iranica. (ISI-cited publication). Under Review.
13.Basim A. Kidhir, Bashir Mohammed, Adeel H. Suhail, N. Ismail “Investigating the Influence of Approach Angle for Ceramic Cutting Tools on Chip Formation During Turning” Volume 37, Number 3 (2012), Arabian Journal for Science and Engineering April 2012, Volume 37, Issue 3, pp 793-802.
14.Moaz H. Ali, Basim A. Khidhir, Bashir Mohamed, A.A. Oshkour “Investigation on Chip Formation during Machining Using Finite Element Modeling” Advanced Materials Research Vol. 505 (2012) pp 31-36.
15.Moaz H. Ali, R. Balasubramanian, Bashir Mohamed, Basim A. Khidhir, Effects of Coolants on Improving Machining Parameters while Mach-Inability Titanium Alloy (Ti-6Al-4V): A Review, Applied Mechanics and Materials Journal, 2011, Vols.110-116, pp.1657-1666, Switzerland, Scopus.
16.Moaz H. Ali, Basim A. Khidhir, Bashir Mohamed, R. Balasubramanian, A.A. Oshkour, Machining of Titanium Alloys: A Review, UNITEN SCORED 2011.
17.Moaz H. Ali, Basim A. Khidhir, Bashir Mohamed, A.A. Oshkour, Investigation on Chip Formation During Machining Using Finite Element Modeling, Advanced Materials Research Journal, 2012, Vol.505, pp.31-36, Germany, Scopus.
18.Moaz H. Ali, Basim A. Khidhir, Bashir Mohamed, and A. A. Oshkour, Prediction of High Cutting Speed Parameters for Ti-6Al-4V by Using Finite Element Modeling, International Journal of Modeling and Optimization (IJMO), 2012, Vol.2(1), pp.31-35, IACSIT in Singapore.
19.Moaz H. Ali, Basim A. Khidhir, Bashir Mohamed, Finite Element Modeling For Prediction Of Stress – Strain At Several Feed Rates And Cutting Speeds For Titanium (Ti-6Al-4V) Alloy, Advanced Materials Research Journal, 2012, Vol.[] , pp. [], Germany, Scopus.
20. Moaz H. Ali, Basim A. Khidhir, Bashir Mohamed, Research on Finite Elements Modeling To Predict the Machining of Titanium Alloys Through Numerical Software Simulation ,The Arabian Journal for Science and Engineering, 2011, Under Review, ISI Springer.
21.Moaz H. Ali, Basim A. Khidhir, Bashir Mohamed, Finite Element Modeling For Predicting The Effect Of Cutting Speed On The Cutting Forces And Energy For Titanium (Ti-6Al-4V) Alloy, Journal of Mechanical Science and Technology, 2012, Under Review, ISI Springer.
22.Moaz H. Ali, Basim A. Khidhir, Bashir Mohamed, Predicting the Effect Depth of cut On Machining Parameters For Ti-6Al-4V By Using Finite Element Modeling, International Journal of Precision Engineering and Manufacturing, 2012, Under Review, ISI Springer.
23.Moaz H. Ali, Bashir Mohamed, M.N.M.Ansari and Basim A. Khidhir, Finite Element Modeling For Prediction The Effect Of Nose Radius On Cutting Forces For Titanium (Ti-6Al-4V) Alloy, Journal of Engineering Science and Technology Review, 2012, Greece, Under Review.
24.Moaz H. Ali, Bashir Mohamed, M.N.M.Ansar, and Basim A. Khidhir, Finite Element Modeling Prediction The Effect Of Nose Radius On The Equivalent Strain (PEEQ) For Titanium (Ti-6Al-4V) Alloy, Nanotech12 - Conference, 2012, USA, Under Review.
25.Basim A. Khidhira, Bashir Mohamed “Study on burr formation mechanism when turning nickel based alloys” Accepted for publication, Journal of Experimental Techniques, Society for Experimental Mechanics, Inc. 2010.
26.Adeel H. Suhail, N. Ismail, Basim A. Kidhir, Bashir Mohammed “Materials machinability comparison using surface roughness and root mean square for cutting tool vibration as performance characteristics in turning process ” World Engineering Congress 2010, 2nd – 5th August 2010, Kuching, Sarawak, Malaysia.
27.Sadam. H. Hussein, Kamal Nasharuddin Bin Mustapha, Amir H. Al-Falahi, Basim A. Khidhir, Hamzah.Bin.MD.Yousf “Using Box-Behnken to Specify Number of Experiments Required to Study the Structural Behavior of LWRC Beams Made with Palm Oil Clinker with Web Openings” UNITEN GRADUATE STUDENT CONFERENCE ON RESEARCH AND DEVELOPMENT 2010 (UNITEN Scored IEEE)
28.Basim A. Khidhir, Bashir Mohamed, 2010 “ Machining of Nickel based alloys using different cemented carbide tools” Journal of Engineering Science & Technology, vol. 5, issue 1, pp. 110-115.
29.Basim A. Khidhir, Bashir Mohamed, 2010 “Modification approach of fuzzy logic model for predicting of cutting force when machining nickel based Hastelloy – 276”. 2009. American J. of Engineering and Applied Sciences 3 (1): 207-213, ISSN 1941-7020.
30.Basim A. Khidhir; Bashir Mohamed, 2009 “ Selecting of Cutting Parameters from Prediction Model of Cutting Force for Turning Nickel Based Hastelloy C-276 Using Response Surface Methodology” European Journal of Scientific Research, 2009ISSN 1450-216X Vol.33 No.3, pp.525-535.
31.Basim A. Khidhir; Bashir Mohamed “Analyzing the effect of cutting speed on surface finish and tool wear when machining nickel based Hastelloy – 276”. International Advanced of Technology Congress (ATCi), PWTC, Malaysia. November 3-5, 2009.
32.Basim A. Khidhir, Bashir Mohamed, Zaimah Hassan, H. Hatab, “Effect of cutting speed on surface roughness and chip formation when machining nickel based Hastelloy C-276” UNITEN GRADUATE STUDENT CONFERENCE ON RESEARCH AND DEVELOPMENT 2008(UNITEN SCOReD).
33.Basim A. Khidhir; Bashir Mohamed, 2009 “On – line monitoring to study the effect of burr formation on tool wear and surface roughness when machining nickel based Hastelloy C-276”. 25th regional conference on solid state science & technology.
34.Basim A. Khidhir, Bashir Mohamed, 2008 “Expert System For Prediction of Machining Parameters: A Review” UNITEN GRADUATE STUDENT CONFERENCE ON RESEARCH AND DEVELOPMENT 2008(UNITEN SCOReD).
35.Samuel Savarimuthu, Basim A. Khidhir & Kannan M. Munisamy, 2008 “Optimized G-Code Programming For The Fabrication of Ventilated Disc Brake Test Specimen Using Okuma OSP-U10M CNC Milling Machine” Accepted, UNITEN GRADUATE STUDENT CONFERENCE ON RESEARCH AND DEVELOPMENT 2008(UNITEN SCOReD).
36.Ismail S., Basim A. Khidhir, 2007 “Improvement of vehicles performance by changing drag coefficient, speed of car and project of front area” Journal of Zanko, University of Salah-Aldein,.
37.Basim A. Khidhir, 2000 “Study the Exit in intermittent cutting” University of Duhok First conference.
38.Basim A. Khidhir, 2000 “Study the influence of foot formation in intermittent cutting” University of Duhok First Conference.
Page updated
Report abuse