Embedded Files
VertX® V300 Output Control Interface
VertX® V300 Output Control Interface
Output Control Processing for up to 12 Devices
The HID VertX products provide a complete and fully featured hardware/firmware infrastructure for access control software host systems. The V300 output control interface contains 12 latching Form-C relays, which can connect up to 12 devices controllable by simple contact closures, such as logic inputs for process equipment, HVAC and elevator control panels, CCTV switchers, etc. Loads exceeding 2 A @ 30 VDC should be controlled via interposing relays.
The V300 features on-board flash memory, allowing program updates to be downloaded via the network. The V300 connects to the V1000 through a high speed RS-485 network. The V1000 communicates with the system host via industry standard TCP/IP protocol over 10/100 Mbps Ethernet or the Internet. This architecture minimizes the impact on corporate LANs, by using only one TCP/IP address for every 32 Interfaces, and by handling low-level transactions on the RS-485 network.
Key Features
Key Features
- Off-normal status programmable for each input point (NO or NC alarm devices may be used).
- 12 latching Form-C relays, contacts rated at 2A @ 30VDC.
- Connects to the V1000 via RS-485.
- Receives and processes real time commands from the V1000.
- Reports all activity to the V1000.
- Allows complex input/output linking when used with the V1000 and V200.
- Attractive polycarbonate enclosure protects components from damage.
- All connections and indicators are fully identified by silk-screened nomenclature on the cover.
- UL 294 and UL 1076 recognized component.
Specifications
Specifications
- Dimensions: 5.8" W x 4.825" H x 1.275" D (147.32 mm x 122.55 mm x 32.38 mm)
- Weight: 13.6 oz (.38 kg)
- Power Supply Requirements
- 60 mA @ 9-18 VDC
- Recommended: supervised linear power supply with battery backup, input surge protection, and AC Fail and battery low contact outputs.
- Separate supervised, DC supply with battery back-up recommended for relay activated devices.
- Cable Distance
- RS-485 – 4000 feet (1220 m) to host using Belden 3105A, 22 AWG twisted pair, shielded 100Ω cable
- Output Circuits – 500 feet (150 m), 2-conductor, using ALPHA 1172C (22AWG) or Alpha 1897C (18AWG)
- Minimum wire gauge depends on cable length and current requirements.
- Relay Rating
- 2 A @ 30 VDC maximum load
- Operating Environment
- Indoors, or customer-supplied NEMA-4 rated enclosure
- Temperature: 32° to 122° F (0° to 50° C)
- Humidity: 5% to 95% relative, non-condensing
- Communications Ports
- RS-485: two wire.
- Certifications
- UL 294 and UL 1076 Recognized Component for the US
- CSA 205 for Canada
- FCC Class A Verification
- EMC for Canada, EU (CE Mark), Australia (C-Tick Mark), New Zealand, Japan
- EN 50130-4 Access Control Systems Immunity for the EU (CE Mark)
Page updated
Report abuse