Embedded Files
At the R.W. Creteau Regional Technology Center each program is advised, assisted and supported by a Program Advisory Committee (PAC) made up of business owners, industry professionals, program faculty, students and other subject matter experts. The committee helps with curriculum, technological developments, job development demands and establishing performance standards that reflect the quality of the program and the needs of the industry within the community.
At the R.W. Creteau Regional Technology Center each program is advised, assisted and supported by a Program Advisory Committee (PAC) made up of business owners, industry professionals, program faculty, students and other subject matter experts. The committee helps with curriculum, technological developments, job development demands and establishing performance standards that reflect the quality of the program and the needs of the industry within the community.
Accounting
CTE Instructor(s):
Angela Lattime, Accounting Instructor at the R.W. Creteau Technology Center
Leah Taylor, Business Instructor at the R.W. Creteau Technology Center
Post-secondary Education Professionals:
Dan Murphy, CPA & Chairperson/Professor in Accounting at Southern New Hampshire University
Lynda A. Bonneau, Associate Professor in Accounting at Great Bay Community College
Industry Professionals:
John R. Creteau, RFP, CMFC, CLTC, LUTCF, Financial Advisor at Creteau Hackett Lachapelle & Associates LLC
Maria Mitropoulos, CPA at Purdy Powers & Company
Lyn Kasch, CPA at Leone, McDonnell & Roberts
Kathryn Mitropoulos, CPA at New Hampshire Department of Revenue
Dan Hebert, NH State President at Jump$tart
Chelsea Marshall, CPA at Vapotherm
Rich Hilow, Financial Advisor at LPL Financial
Accounting Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Architectural/Mechanical Engineering
CTE Instructor(s):
Jason Eberl, Architectural/Mechanical Engineering Instructor at the R.W. Creteau Technology Center
Mark Archambeault, Precision Machining Instructor at the R.W. Creteau Technology Center
Jason Daggett, Manufacturing Instructor at the R.W. Creteau Technology Center
Post-secondary Education Professionals:
Mark G. Dodge, Professor and Program Coordinator at Nashua Community College
Industry Professionals:
Jon Sidmore, Vice President at Northeast Precision Machine
Christophe Y. Cloitre, Engineer at Ashland Electric Products
Randy Bolduc, Manufacturing Technical Training Manager at Pratt & Whitney
Zac Robinson, Supervisor at DMG Manufacturing
Kyle Robbins, Training Manager at TurboCam International
William Hinton, Owner/ Engineering Analyst at Hinton Technical Services
Josh Roberts, Materialist analysis at Rubber Group
Dean Graziano, Vice President of Education at Izzit.Org
Mike Ogilivy, Sales/ technician at E-Stem
Costikyan Jarvis, President at Jarvis Cutting Tools
Mike McCarthy, Technician at Mite Bite
Fred Bingham, CEO at Daily Grind
Architecture/Mechanical Engineering Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Automotive Service Technology
CTE Instructor(s):
Bob Nienhouse, Automotive Instructor at the R.W. Creteau Technology Center
Industry Partners:
Automotive Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Spring 2021
Banking & Financial Support Services
CTE Instructor(s):
Coming Soon! Banking Instructor at the R.W. Creteau Technology Center
Industry Professionals:
Travis Bissonette, AVP of Consumer Lending at HRCU
Mary Henderson, VP Office Manager at Bank of NH
Ashley Fortin, Assistant Branch Manager at HRCU
Kristen Graves, Assistant Branch Manager at NECU
Kristy Methot, Realtor at the Zoeller Realty Group
Banking Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Business Commerce
CTE Instructor(s):
Leah Taylor, Business Instructor at the R.W. Creteau Technology Center
Angela Lattime, Accounting Instructor at the R.W. Creteau Technology Center
Post-secondary Education Professionals:
Dan Murphy, CPA & Chairperson/Professor in Accounting at Southern New Hampshire University
Lynda A. Bonneau, Associate Professor in Accounting at Great Bay Community College
Industry Professionals:
John R. Creteau, RFP, CMFC, CLTC, LUTCF, Financial Advisor at Creteau Hackett Lachapelle & Associates LLC
Maria Mitropoulos, CPA at Purdy Powers & Company
Lyn Kasch, CPA at Leone, McDonnell & Roberts
Kathryn Mitropoulos, CPA at New Hampshire Department of Revenue
Dan Hebert, NH State President at Jump$tart
Chelsea Marshall, CPA at Vapotherm
Rich Hilow, Financial Advisor at LPL Financial
Business Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Computer Networking & Telecommunications
CTE Instructor(s):
Sean Kenney, Computer Networking & Telecommunications Instructor at the R.W. Creteau Technology Center
Industry Professionals:
David Moser, Help Desk Supervisor at Atlantic Broadband
Morgan Pierce, Help Desk at Atlantic Broadband
Steven Howe, NOC Supervisor at Atlantic Broadband
Josh Annis, CIC Level 1 Tech at the Rochester School District
Darren Codling, Help Desk Technician at Back Bay Networks NH
Nicholas B Kershow, Network administrator at General Dynamics Information Technology
Robert Stacy II, Business Development Representative at Chameleon Group, LLC
Brendan Beaulieu, Project/Logistics Coordinator at Eco-Grip Floor LLC
Michael Dumont, Self Employed Consultant
Marc Adams, Support Center Associate at Atrion Networking Corporation
Daniel Bahlert, Level 1 technician at the Rochester School District
Brandon O'Neil, Help Desk Technician at Back Bay Networks NH
Jeffrey Gilbert, IT Executive Support at Bottomline Technologies
Kyle Garland, IT technician at DC Home Systems
Gil Tolley, Systems Administrator at HRCU
Sean Curran, IT Technician at RiverWoods Exeter
Brian Chesbrough, Senior Software Development Engineer at Outreach
Computer Networking & Telecommunications Students:
We always invite several current and/or past students to attend our advisory meetings.
Criminal Justice
CTE Instructors:
Jay Keough, Criminal Justice Instructor at the R.W. Creteau Technology Center
Post-secondary Education Professionals:
, Professor at Great Bay Community College
Industry Professionals:
Lieutenant Anne Gould, Prosecutor
Officer Andrew Jackson, School RSO
TSgt Derek Arsenault, USAF SF
Nicole Rodler, Juvenile Court
Jennifer McLain, Truancy Officer
Michael Marriott, Correctional Officer
Criminal Justice Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Environmental Science & Sustainable Studies
CTE Instructor(s):
Darren Scopel, Environmental Science Instructor at the R.W. Creteau Technology Center
Post-secondary Education Professionals:
Win Watson, Professor Emeritus at UNH Zoology
Michael Chambers, Associate Professor at UNH - School of Marine Science and Ocean Engineering
Todd Guerdot, Assistant Professor at UNH - College of Life Sciences and Agriculture
Industry Professionals:
Ted Walsh, Aquatic Biologist at NH Department of Environmental Services
Matt Carpenter, Fisheries Biologist at NH Fish and Game
David O'Conner, Hydroponics Consultant
Chad Michaud, Geotechnical Engineer and Vice President of SW Cole Engineering
Environmental Science Students:
We always invite several current and/or past students to attend our advisory meetings.
Graphic Design
CTE Instructor(s):
Lori Discoe, Graphic Design Instructor at R.W. Creteau Technology Center
Justin Discoe, Photo/Video Instructor at R.W. Creteau Technology Center
Industry Professionals:
Robert Sullivan, Senior Account Executive at Konica Minolta
Michelle Robbins, Owner at B&B Printing
June Roberts-Sherman, Chairperson/Instructor at Graphics Communication Technology
Sadie Cahoon, Graphic Design Teacher at Conval High School
Graphic Design Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Health Science Technology
CTE Instructor(s):
Lisa Kumph, Health Science Instructor at the R.W. Creteau Technoly Center
Industry Professionals:
Jessamy Cornell, RDN, LD, CDE, Diabetes Education Coordinator and Registered Dietitian at Huggins Hospital
Joseph Shanley Jr., PTA, CCI, ATC, EMT, PT Assistant at Marshbrook Rehab
Kim L Hashem-Dugal MBA, NCMA, Medical Assistant and Medical Office Program Developer at Allied Health and program director at Great Bay Community College
Kim Houle, RN,BSN, Wound Care Specialist and SHS Parent
Kirsten Berthiaume, PT at York Hospital Pediatric Hospital
Kelsie Goodwin, OT at York Hospital Pediatric Hospital
Jo-Ann Vatcher, Director of Education at Frisbe Memorial Hospital
Health Science Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Heating, Ventilation, Air Conditioning and Refrigeration
CTE Instructor(s):
John Mastroianni, HVAC Instructor at the R.W. Creteau Technology Center
Industry Professionals:
Lyndon Rickards, Assistant VP of Risk Management at Eastern Propane & Oil
John Cocarus, Jurisdictional System Coordinator at Eastern Propane & Oil
Peter Meserve, Technical Trainer at Eastern Propane & Oil
Mike Mondalto, Service Manager at Townsend Energy
Donald Chagnon, Managing Partner at Townsend Energy
Erin Libby, Project Manager at Palmer & Sicard
Ryan Jackson, Chief Operating Officer at D.F. Richard
Keith Newton, Account Representative at D.F. Richard
Mike Strogen, General Manager at Strogen’s Heating & Air Conditioning
William Hinton, Owner/ Engineering Analyst at Hinton Technical Services
Mike O’Shea, General Manager at F.W. Webb
HVAC Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Manufacturing (Woodworking)
CTE Instructor(s):
Jason Daggett, Manufacturing Instructor at the R.W. Creteau Technology Center
Jason Eberl, Architectural/Mechanical Engineering Instructor at the R.W. Creteau Technology Center
Mark Archambeault, Precision Machining Instructor at the R.W. Creteau Technology Center
Post-secondary Education Professionals:
Mark G. Dodge, Professor and Program Coordinator at
Nashua Community College
Industry Professionals:
Jon Sidmore, Vice President at Northeast Precision Machine
Christophe Y. Cloitre, Engineer at Ashland Electric Products
Randy Bolduc, Manufacturing Technical Training Manager at Pratt & Whitney
Zac Robinson, Supervisor at DMG Manufacturing
Kyle Robbins, Training Manager at TurboCam International
William Hinton, Owner/ Engineering Analyst at Hinton Technical Services
Josh Roberts, Materialist analysis at Rubber Group
Dean Graziano, Vice President of Education at Izzit.Org
Mike Ogilivy, Sales/ technician at E-Stem
Costikyan Jarvis, President at Jarvis Cutting Tools
Mike McCarthy, Technician at Mite Bite
Fred Bingham, CEO at Daily Grind
Manufacturing (Woodworking) Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Precision Machining
CTE Instructor(s):
Mark Archambeault, Precision Machining Instructor at the R.W. Creteau Technology Center
Jason Daggett, Manufacturing Instructor at the R.W. Creteau Technology Center
Jason Eberl, Architectural/Mechanical Engineering Instructor at the R.W. Creteau Technology Center
Post-secondary Education Professionals:
Mark G. Dodge, Professor and Program Coordinator at
Nashua Community College
Industry Professionals:
Jon Sidmore, Vice President at Northeast Precision Machine
Christophe Y. Cloitre, Engineer at Ashland Electric Products
Randy Bolduc, Manufacturing Technical Training Manager at Pratt & Whitney
Zac Robinson, Supervisor at DMG Manufacturing
Kyle Robbins, Training Manager at TurboCam International
William Hinton, Owner/ Engineering Analyst at Hinton Technical Services
Josh Roberts, Materialist analysis at Rubber Group
Dean Graziano, Vice President of Education at Izzit.Org
Mike Ogilivy, Sales/ technician at E-Stem
Costikyan Jarvis, President at Jarvis Cutting Tools
Mike McCarthy, Technician at Mite Bite
Fred Bingham, CEO at Daily Grind
Machining Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Restaurant Management
CTE Instructor(s):
Victoria Garay, Restaurant Management Instructor at the R.W. Creteau Technology Center
Deborah Weymouth, Restaurant Management Instructor at the R.W. Creteau Technology Center
Post-secondary Education Professionals:
Patrick Hall, Chef Instructor at Lakes Region Community College
Industry Professionals:
Jennifer Mash, Economic Development Specialist for the City of Rochester
Robert Veno, Health Inspector for the City of Rochester
Gary Sheldon, Chef Instructor at ProStart
Cheri Allen, Instructor at ProStart
Restaurant Management Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Teaching Multiple Levels (Foundations of Education)
CTE Instructor(s):
Patrice Hunt, Teaching Multiple Levels Instructor at the R.W. Creteau Technology Center
Tracy Mitropoulos, Accounting Instructor at the R.W. Creteau Technology Center
Michele Haligan-Foley, Director of the R.W. Creteau Technology Center
Rochester School Department Partners:
Allison Gilbert, Math Teacher at Spaulding High School
Andrea Lancey
Caitlen Madore, Social Studies Teacher at Spaulding High School
Jenna Kotsonis, Assistant Principal at Spaulding High School
Justin Roy, Principal at Spaulding High School
Meghan Walkama
Meredith Tansey
Sara Cantrell
Post-secondary Education:
Anita French, Professor at Great Bay Community College
Darleen Cataldo, Professor at Great Bay Community College
Industry Professionals:
Anne Grassie
Pat Meattey, Education Manager at Strafford County Head Start
Madison Tingle
Dominic Lynch
Teaching of Multiple Level Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
Video & Photographic Arts
CTE Instructors:
Justin Discoe, Photo & Video Instructor at the R.W. Creteau Technology Center
Industry Professionals:
Tanya Hervey, Professional Photographer at Tanya Lee Hervey Photography
Mark Bolton, Professional Photographer at Mark Bolton Photography
David Langley, Creative Video Production Professional at davelangleydesign@comcast.net
Video & Photography Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
AFJROTC - Aviation S.T.E.M.
CTE Instructor(s):
Major Daniel Heeter
Post-secondary Education Professionals:
Domenic LaFauci, Assistant Dean of Aviation at SNHU
Industry Professionals:
Steve Wade, Captain and Flight Instructor with American Airlines
Tom Morgera, Mechanic and Inspector with T-Aviation and Skyhaven Airport
Jamie Wixson, Drone Pilot and Survey Field Crew Chief with Nitsch Engineering Inc.
Bill Kennedy, Flight Instructor and retired USAF Navigator and retired pilot at Skyhaven Flying Club
John Gisis, Photographer and Commercial Drone Pilot with John Gisis Photography
Matt Frederickson, Police Office and Commercial Drone Training Officer with Portsmouth Police Department
Aviation Students:
We always invite several current and/or past students to attend our advisory meetings.
Program Advisory Committee Meeting Minutes
2021_Joint_Advisory_Board_Meeting (1).pdfDonation Form 20-21 (2).pdfdonation memo.pdfFuture Partners:
Future Partners:
If you or your business would like to participate on one of our Program Advisory Committees please contact us.
If you or your business would like to participate in one of our Extended Learning Opportunities please contact Lauren Jerr.
Report abuse