# CCS timing model into ECSM timing model and vice-versa

Post date: Aug 12, 2014 9:56:50 PM

keywords: CCS (Composite Current Source), ECSM (Effective Current Source Model), STA (Static Timing Analysis)

## Timing Models

Delay calculator of static timing analysis engine looks up CCS or ECSM timing models in liberty file, interpolate or extrapolates neighboring points before it uses them in static timing analysis. CCS driver model captures output current flowing through load capacitor. Thus CCS model forces characterization engine to have a non-zero capacitance connected to cell's output. ECSM driver model captures voltage waveform at cell's output. ECSM driver model can capture load sensitivity starting from zero load capacitance, whereas CCS must start from non-zero load capacitor.

Figure: Inverter's current/voltage profile

## CCS and ECSM are two sides of the same coin

Here we relate these two driver model using basic circuit theory, which defines charge as:

where

q=charge stored in capacitor,

C=capacitance

v=voltage across capacitor

Also, Current is a measurement of the flow of electricity and is generally describe as

Combining these two equations, gives us

differentiating and integrating both sides w.r.t time, yields

These two equations enlighten us that current and voltage is nothing but two faces of charge stored in capacitor. And current can be computed from voltage and vice-versa.

## Translation

Remember, we said earlier that CCS driver model captures output current flowing through load capacitor and ECSM driver model captures voltage waveform at cell's output. Since we've shown that current can be computed from voltage and vice-versa, it is easy to see that CCS driver model can be derived from ECSM driver and vice-versa.

## Summary

However, this translation has practical accuracy limitations. ECSM voltage and CCS current waveform are sampled with far fewer points - typically 10 to 100 times fewer points from reference simulator's output. There is limited accuracy loss, when these points are sampled judiciously from circuit simulator's output. Accuracy loss may become pronounced, in case sampled ECSM voltage waveform is translated into CCS current waveform (and vice-versa) because of missing data.

© Paripath Inc, 2014. Unauthorized use and/or duplication of this material without express and written permission from this blog’s owner is strictly prohibited. Excerpts and links may be used, provided that full and clear credit is given to Paripath Inc with url www.paripath.com and specific direction to the original content.