Publications
PUBLICATIONS – JOURNAL PAPERS
2024
1) R. Taher, J. F. Derakhshandeh, H. El Hage, J. Faraj, M. Mortazavi, T. Lemenand, and M. Khaled, Innovative concept of splitting water flow rate of cross flow Heat Exchangers as a solution for reduction of non-uniformity effect – Thermal modelling and feasibility analysis, Applied Thermal Engineering, 236 (2024) 121483.
2023
2) S. Ali, T. Dbouk, M. Khaled, J. Faraj, and D. Drikakis, Adjoint Shape Optimisation of Concentric Tube Heat Exchangers, Physics of Fluids, 35 (2023) 095127.
3) T. Ibrahim, F. Hachem, M. Ramadan, J. Faraj, G. El Achkar, K. Chahine, and M. Khaled, Cooling PV Panels by Free and Forced Convections: Experiments and Comparative Study, AIMS Energy, 11 (2023) 774-794.
4) R. Aridi, S. Ali, T. Lemenand, J. Faraj, and M. Khaled, Thermo-economic and environmental analysis of vortex generator-equipped multi-drain heat recovery systems, International Journal of Thermofluids, 20 (2023) 100455.
5) R. Aridi, S. Ali, T. Lemenand, J. Faraj ,and M. Khaled, Thermoeconomic, environmental, and social impacts of vortex generator-equipped multi-drain heat recovery systems under various renewable sources, Submitted to Energy Conversion and Management: X, 20 (2023) 100431.
6) J. F. Derakhshandeh, R. Taher, and M. Khaled, Manipulation of bumpy surface cylinders for flow control and heat transfer improvement, International Journal of Thermofluids, 20 (2023) 100435.
7) J. Faraj, G. El Achkar, B. Abdulhay, H. El Hage, R. Taher, and M. Khaled, New Concept of Power Generation from TEGs Using the Sun Irradiation and Oil Tanks – Thermal Modeling and Parametric Study, Defect and Diffusion Forum, 428 (2023) 131-139.
8) Z. Wehbi, R. Taher, J. Faraj, T. Lemenand, M. Mortazavi, and M. Khaled, Waste Water Heat Recovery Systems Types and Applications: Comprehensive Review, Critical Analysis, and Potential Recommendations, Energy Reports, 9 (2023) 16-33.
9) A. Shaito, H. El Hage, J. Faraj, M. Mortazavi, T. Lemenand, and M. Khaled, Thermal modeling and parametric study of TEG power generation from the exhaust gas of boilers and cold oil tank, Energy Reports, 9 (2023) 51-58.
10) R. Murr, G. El Achkar, J. Faraj, H. El Hage, C. Castelain, and M. Khaled, Using solar air heating for fruit drying: Thermo-economic and environmental studies, International Journal of Thermofluids, 18 (2023) 100366.
11) A. Herez, H. Jaber, H. El Hage, T. Lemenand, K. Chahine, M. Ramadan, and M. Khaled, Parabolic Trough Photovoltaic Thermoelectric Hybrid System: Simulation Model, Parametric Analysis, and Practical Recommendations, International Journal of Thermofluids, 17 (2023) 100309.
12) M. Khaled, K. Faraj, H. El Hage, J. Faraj, R. Taher, and M. Mortazavi, Multi-passage concept applied to water-air cross flow tubes-and-fins heat exchangers – Thermal modelling and feasibility study, International Journal of Thermofluids, 17 (2023) 100291.
2022
13) R. Aridi, S. Ali, T. Lemenand, J. Faraj, and M. Khaled, CFD analysis on the spatial effect of vortex generators in concentric tube heat exchangers – A comparative study, International Journal of Thermofluids, 16 (2022) 100247.
14) A. Haddad, H. Jaber, M. Khaled, R. Al Afif, and M. Ramadan, An investigation on coupling fuel cell, wind turbine and PV as green to green system, International Journal of Hydrogen Energy, In press.
15) E. Jari, F. Hachem, K. Faraj, J. Faraj, R. Taher, G. El Achkar, and M. Khaled, Use of Insulation and Phase Change Material in Building Structures – Experiments and Physical Analysis, Key Engineering Materials, 936 (2022) 177-189.
16) G. El Achkar , A. Rabih, J. Faraj, I. Kamra, R. Taher, and M. Khaled, Combined Solid Olive Pomace Waste Biofuel: Heating Energy Enhancement and Comparative Experimental Analysis, Key Engineering Materials, 936 (2022) 125-136.
17) M. Khaled, M. Mortada, J. Faraj, K. Chahine, T. Lemenand, and H.S. Ramadan, Effect of Airflow Non-Uniformities on the Thermal Performance of Water–Air Heat Exchangers—Experimental Study and Analysis, Energies, 15 (2022) 8120.
18) J. Faraj, K. Chahine, M. Mortada, T. Lemenand, H.S. Ramadan, M. Khaled, Eco-Efficient Vehicle Cooling Modules with Integrated Diffusers—Thermal, Energy, and Environmental Analyses, Energies, 15 (2022), 7917.
19) K. Faraj, M. Khaled, J. Faraj, F. Hachem, K. Chahine, and C. Castelain, Energetic and economic analyses of integrating enhanced macro-encapsulated PCM’s with active underfloor hydronic heating system, Energy Reports, 8 (2022) 848-862.
20) Z. Wehbi, R. Taher, J. Faraj, M. Ramadan, C. Castelain, and M. Khaled, A Short Review of Recent Studies on Wastewater Heat Recovery Systems: Types and Applications, Energy Reports, 8 (2022) 896-907.
21) K. Faraj, M. Khaled, J. Faraj, F. Hachem, K. Chahine, and C. Castelain, Short recent summary review on evolving phase change material encapsulation techniques for building applications, Energy Reports, 8 (2022) 1245-1260.
22) O. Farhat, M. Khaled, J. Faraj, F. Hachem, R. Taher, and C. Castelain, A short recent review on Hybrid Energy Systems: Critical Analysis and Recommendations, Energy Reports, 8 (2022) 792-802.
23) Z. Wehbi, R. Taher, J. Faraj, C. Castelain and M. Khaled, Hybrid Thermoelectric Generators-Renewable Energy Systems: A Review on Recent Developments, Energy Reports, 8 (2022) 1361-1370.
24) R. Aridi, J. Faraj, S. Ali, T. Lemenand, and M. Khaled, A comprehensive review on hybrid heat recovery systems: Classifications, applications, pros and cons, and new systems, Renewable and Sustainable Energy Reviews, 167 (2022) 112669.
25) O. Farhat, J. Faraj, F. Hachem, C. Castelain, and M. Khaled, A recent review on waste heat recovery methodologies and applications: comprehensive review, critical analysis and potential recommendations, Cleaner Engineering and Technology. 6 (2022) 100387.
26) K. Faraj, M. Khaled, J. Faraj, F. Hachem, and C. Castelain, A Summary Review on Experimental Studies for PCM Building Applications: Towards Advanced Modular Prototype, Energies, 15 (2022) 1459.
27) R. Murr, J. Faraj, E. Harika,C. Castelain, and M. Khaled, Enhanced cooling system with integrated multi-geothermal concept– numerical and experimental studies, Results in Engineering, 13 (2022) 100361.
28) M. Khaled, S. Ali, H. Jaber, J. Faraj, R. Murr, and T. Lemenand, Heating/Cooling Fresh Air Using Hot/Cold Exhaust Air of Heating, Ventilating, and Air Conditioning Systems, Energies, 15 (2022) 1877.
2021
29) J. Faraj, M. Akoum, A. Faraj, H. S. Ramadan, and M. Khaled, Heat recovery from parked vehicles: Experiments and Analysis, Case Studies in Thermal Engineering, 28 (2021) 101573.
30) A. Faraj, J. Faraj, E. Harika, F. Hachem, and M. Khaled, Development and validation of a new method for estimating the overall heat transfer coefficient of heat exchangers, Case Studies in Thermal Engineering, 28 (2021) 101434.
31) R. Aridi, J. Faraj, M. Gad El-Rab, and M. Khaled, Energy recovery in air conditioning systems: Comprehensive Review, Classifications, Critical Analysis and Potential Recommendations, Energies, 14 (2021) 5869.
32) R. Aridi, J. Faraj, S. Ali, T. Lemenand, and M. Khaled, Thermoelectric Generators (TEGs) for Power Generation: Applications, Heat Recovery Method, and Challenges, Electricity, 2 (2021) 359-386.
33) W. Salameh, J. Faraj, E. Harika, R. Murr, and M. Khaled, On the optimization of electrical water heaters: Modelling Simulations and Experimentation, Energies, 14 (2021) 3912.
34) M. Mortada, H. S. Ramadan, J. Faraj, A. Faraj, H. El Hage, and M. Khaled, Fuel Cell Scaling up Limitations and Reactant Flow Nonuniformity Impacts: Comprehensive Review, Critical Analysis and Potential Recommendations, International Journal of Hydrogen Energy, 46 (2021) 32161-32191.
35) K. Faraj, M. Khaled, J. Faraj, F. Hachem, and C. Castelain, Experimental Study on the Use of Enhanced Coconut Oil and Paraffin Wax Phase Change Material in Active Heating Using Advanced Modular Prototype, Journal of Energy Storage, 41 (2021) 102815.
36) A. Herez, H. El Hage, T. Lemenand, M. Ramadan, and M. Khaled, Parabolic trough Photovoltaic/Thermal hybrid system: Thermal Modeling, case studies, and economic and environmental analyzes, Renewable Energy Focus, 38 (2021) 9-21.
37) A. Herez, H. El Hage, T. Lemenand, M. Ramadan, and M. Khaled, Parabolic trough Photovoltaic Thermoelectric Hybrid system: Thermal modeling, case studies and economic and environmental analyses, Sustainable Energy Technologies and Assessments, 47 (2021) 101368.
38) W. Salameh, C. Castelain, J. Faraj, R. Murr, H. El Hage, and M. Khaled, Improving the efficiency of photovoltaic panels using air exhausted from HVAC systems, Case Studies in Thermal Engineering, 25 (2021) 100940.
39) A. Herez, H. El Hage, T. Lemenand, M. Ramadan, and M. Khaled, Parabolic trough Photovoltaic/Thermal hybrid system: Thermal modeling and parametric analysis, Renewable Energy, 165 (2021) 224-236.
40) K. Faraj, M. Khaled, J. Faraj, F. Hachem, and C. Castelain, A Review on Phase Change Materials for Thermal Energy Storage in Buildings: Heating and Hybrid Applications, Journal of Energy Storage, 33 (2021) 101913.
41) H. Jaber, T. Lemenand, M. Ramadan, and M. Khaled, Hybrid heat recovery system applied to exhaust gases – Thermal modeling and case study, Heat Transfer Engineering, 42 (2021) 106-119.
2020
42) M. Ramadan, H. Jaber, M. Khaled, T. Lemenand, and J. Faraj, Numerical simulation of multi-tube tank heat exchanger: Optimization analysis, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42 (2020) 3008-3018.
43) H. El Hage, M. Ramadan, H. Jaber, M. Khaled, and A. Olabi, A short review on the techniques of waste heat recovery from domestic applications, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 42 (2020) 3019-3034.
44) A. Haddad, M. Ramadan, M. Khaled, H. Ramadan, and M. Becherif, Study of hybrid energy system coupling fuel cell, solar thermal system and photovoltaic cell, International Journal of Hydrogen Energy, 45 (2020) 13564-13574.
45) A. Herez, H. El Hage, T. Lemenand, M. Ramadan, and M. Khaled, Review on photovoltaic/thermal hybrid solar collectors: Classifications, applications and new systems, Solar Energy, 207 (2020) 1321-1347.
46) R. Murr, J. Faraj, E. Harika, B. Abdulhay, and M. Khaled, Multi drain heat recovery system-Thermal modeling, parametric analysis, and case study, Energy and Buildings, 228 (2020) 1100447.
47) A. Faraj, H. Jaber, K. Chahine, J. Faraj, M. Ramadan, H. El Hage, and M. Khaled, New Concept of Power Generation Using TEGs: Thermal Modeling, Parametric Analysis, and Case Study, Entropy, 22 (2020) 1-16.
48) M. Khaled, R. Murr, H. El Hage, M. Ramadan, H. Ramadan, and M. Becherif, An iterative algorithm for simulating heat recovery from exhaust gas – Application on generators, Mathematics and Computers in Simulations, 167 (2020) 92-103.
49) A. Haddad, M. Ramadan, M. Khaled, H. Ramadan, and M. Becherif, Triple hybrid system coupling fuel cell with wind turbine and thermal solar system, International Journal of Hydrogen Energy, 45 (2020) 11484-11491.
50) J. Faraj, E. Harika, M. Ramadan, S. Ali, F. Harambat, and M. Khaled, Effect of underhood architecture on aerodynamic drag – Suggestion of new concepts for fuel consumption reduction, International Journal of Automotive Technology, 21 (2020) 633-640.
51) K. Faraj, M. Khaled, J. Faraj, F. Hachem, and C. Castelain, Use of Phase Change Materials Thermal Energy Storage Systems for Cooling Applications in Buildings: A Review, Renewable and Sustainable Energy Reviews, 119 (2020) 109579.
2019
52) Z. Wehbi, M. Mortada, J. Faraj, M. Ramadan, H. El Hage, A. Faraj, and M. Khaled, New flowmeter for high temperature flow rate measurements: Design, implementation and testing, Case Studies in Thermal Engineering, 15 (2019) 100529.
53) M. Ramadan, M. Khaled, and L. Fourment, Speeding-up simulation of cogging process by multigrid method, International Journal of Material Forming, 12 (2019) 45-55.
54) R. Murr, M. Ramadan, M. Khaled, and A. Olabi, An iterative code to investigate heat pump performance improvement by exhaust gases heat recovery, Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 41 (2019) 2207-2218.
55) J. Faraj, E. Harika, M. Akoum, R. Murr, and M. Khaled, Enhanced residential water heater: Experiments and analysis, Energy Procedia, 162 (2019) 164-170.
56) M. Becherif, H. S. Ramadan, M.T. Benchouia, M. Khaled, M. Ramadan, and M. Hilairet, Preface - Special Issue on Emerging and Renewable Energy: Generation and Automation, Energy Procedia, 162 (2019) 1-3.
57) K. Faraj, J. Faraj, F. Hachem, H. Bazzi, M. Khaled, and Cathy Castelain, Analysis of underfloor electrical heating system integrated with coconut oil-PCM plates, Applied Thermal Engineering, 158 (2019) 113778.
58) A. Al Mais, M. Abou Akrouch, M. Hawa, M. Ramadan, F. Hachem, and M. Khaled, Improving Photovoltaic Panel Performance Using a Flipping Technique – Analysis and feasibility study, International Journal of Renewable Energy Technology, 10 (2019) 315-327.
59) H. Jaber, M. Khaled, T. Lemenand, and M. Ramadan, Effect of generator load on a hybrid heat recovery system, Case Studies in Thermal Engineering, 13 (2019) 100359.
60) H. Jaber, M. Khaled, T. Lemenand, R. Murr, J. Faraj, and M. Ramadan, Domestic thermoelectric cogeneration drying system: Thermal modeling, and case study, Energy, 170 (2019) 1036-1050.
61) M. Ramadan, R. Murr, M. Khaled, and A. Olabi, Air dryer using waste heat of HVAC systems – Code development and experimental validation, Applied Thermal Engineering, 147 (2019) 302-311.
2018
62) M. Khaled, J. Faraj, E. Harika, F. Harambat, C. Castelain, and M. Ramadan, Impact of underhood leakage zones on the aerothermal situation - Experimental Simulations and physical analysis, Applied Thermal Engineering, 145 (2018) 507-515.
63) H. El Hage, A. Herez, M. Ramadan, H. Bazzi, and M. Khaled, An investigation on solar drying: A review with economic and environmental assessment, Energy, 157 (2018) 815-829.
64) M. Ramadan, M. Khaled, A. Haddad, B. Abdulhay, A. Durrant, and H. El Hage, An inhouse code for simulating heat recovery from boilers to heat water, Energy, 157 (2018) 200-210.
65) K. Chahine, R. Murr, M. Ramadan, H. El Hage, and M. Khaled, Use of parabolic troughs in HVAC applications – Design calculations and analysis, Case Studies in Thermal Engineering, 12 (2018) 285-291.
66) M. Ramadan, R. Murr, M. Khaled, and A.G. Olabi, Mixed numerical - Experimental approach to enhance the heat pump performance by drain water heat recovery, Energy, 149 (2018) 1010-1021.
67) A. Herez, M. Ramadan, and M. Khaled, Review on solar cooker systems: Economic and environmental study for different Lebanese scenarios, Renewable and Sustainable Energy Reviews, 81 (2018) 421-432.
68) H. Jaber, M. Ramadan, T. Lemenand, and M. Khaled, Domestic Thermoelectric Cogeneration System: Optimization Analysis, Energy Consumption and CO2 Emissions Reduction, Applied Thermal Engineering, 130 (2018) 279-295.
69) H. El Hage, C. Castelain, J. Faraj, F. Hachem, M. Ramadan, and M. Khaled, Enhancing the performance of vehicle cooling modules using diffusers, Case Studies in Thermal Engineering, 11 (2018) 120-124.
70) M. Khaled and M. Ramadan, Study of the thermal behavior of multi concentric tube tank in heat recovery from chimney – Analysis and optimization, Heat Transfer Engineering, 39 (2018) 399-409.
2017
71) M. Ramadan, S. Ali, H. Bazzi, and M. Khaled, New hybrid system combining TEG, condenser hot air and exhaust airflow of all-air HVAC systems, Case Studies in Thermal Engineering, 10 (2017) 154-160.
72) A. Elmais, M. Hawa, R. Ammar, M. Abou Akroush, F. Hachem, M. Khaled, and M. Ramadan, Improving photovoltaic panel using finned plate of aluminum, Energy Procedia, 119 (2017) 812-817.
73) R. Ammar, A. Elmais, F. Hachem, M. Khaled, M. Ramadan, M. Abou Akroush, and M. Hawa, Using phase change material in under floor heating, Energy Procedia, 119 (2017) 806-811.
74) H. Jaber, M. Khaled, J. Faraj, T. Lemenand, H. Bazzi and M. Ramadan, Effect of Exhaust Gases Temperature on the Performance of a Hybrid Heat Recovery System, Energy Procedia, 119 (2017) 775-782.
75) A. Herez, M. Khaled, R. Murr, A. Haddad, M. Ramadan and H. Elhage, Using Geothermal Energy for cooling - Parametric study, Energy Procedia, 119 (2017) 783-791.
76) F. Hachem, B. Abdulhay, M. Ramadan, H. El Hage, M. Gad El Rab, and M. Khaled, Improving the performance of photovoltaic cells using pure and combined phase change materials – Experiments and transient energy balance, Renewable Energy, 107 (2017) 567-575.
77) M. Khaled, F. Hachem, M. Gad El Rab, and M. Ramadan, Cooling photovoltaic cells using phase change materials – Experiments and economical study, Engineering Research Journal – Faculty of Engineering Menoufiya University, 40 (2017) 25-29.
78) M. Gad El Rab, M. Khaled, M. Ramadan, and A. Al Hassanieh, Modeling of a solar lithium bromide-water absorption air conditioner in Beirut, Engineering Research Journal – Faculty of Engineering Menoufiya University, 40 (2017) 19-24.
2016
79) M. Khaled, H. El Hage, M. Ramadan, and H. Beltagy, Heating residential water using parabolic trough concentrators – Theoretical calculations and analysis, Progress in Industrial Ecology: An International Journal, 10 (2016) 321-333.
80) M. Khaled and M. Ramadan, Heating fresh air by hot exhaust air of HVAC systems, Case Studies in Thermal Engineering, 8 (2016) 398-402.
81) M. Ramadan, M. Khaled, H.S. Ramadan, and M. Becherif, Modeling and sizing of combined fuel cell-thermal solar system for energy generation, International Journal of Hydrogen Energy, 41 (2016) 19929-19935.
82) M. Ramadan, T. Lemenand, and M. Khaled, Recovering heat from hot drain water – Experimental setup, parametric analysis and new design approach, Energy and Buildings, 128 (2016) 575-582.
83) M. Ramadan, M. Khaled, H. El Hage, F. Harambat, and H. Peerhossaini, Effect of air temperature non-uniformity on water-air heat exchanger thermal performance – Towards new control approach for energy consumption reduction, Applied Energy, 173 (2016) 481-493.
84) M. Khaled, M. Gad El Rab, F. Hachem, H. El Hage, A. Elmarakbi, F. Harambat, and H. Peerhossaini, Experimental study of the flow induced by a vehicle fan and the effect of engine blockage in a simplified model, International Journal of Automotive Technology, 17 (2016) 617-627.
85) M. Khaled, M. Ramadan, and H. El Hage, Innovative approach of determining the overall heat transfer coefficient of heat exchangers – Application to cross-flow water-air types, Applied Thermal Engineering, 99 (2016) 1086-1092.
86) M. Khaled, M. Ramadan, A. Shaito, H. El Hage, F. Harambat, and H. Peerhossaini, Parametric analysis of heat exchanger thermal performance in complex geometries – Effect of velocity and water flow distributions, Heat Transfer Engineering Journal, 37 (2016) 1027-1037.
87) K. Chahine, M. Ramadan, Z. Merhi, H. Jaber, and M. Khaled, Parametric analysis of temperature gradient across thermoelectric power generators, Journal of Electrical Systems, 12-3 (2016) 623-632.
2015
88) M. Ramadan, M. Gad El Rab, and M. Khaled, Parametric analysis of air-water heat recovery concept applied to HVAC systems: Effect of mass flow rates, Case Studies in Thermal Engineering, 6 (2015) 61-68.
89) M. Khaled, M. Ramadan, and H. El Hage, Parametric analysis of heat recovery from exhaust gases of generators, Energy Procedia, 75 (2015) 3295-3300.
90) M. Ramadan, M. Khaled, and H. El Hage, Using speed bump for power generation – Modeling and experimental study, Energy Procedia, 75 (2015) 867-872.
91) M. Khaled, M. Ramadan, A. Elmarakbi, and L. Fourment, Simulation of incremental forming processes using a thermo-mechanical partitioned algorithm, Key Engineering Materials, 651-653 (2015) 1331-1336.
92) M. Khaled, M. Ramadan, K. Chahine, and A. Assi, Prototype implementation and experimental analysis of water heating using recovered waste heat of chimneys, Case Studies in Thermal Engineering, 5 (2015) 127-133.
93) M. Khaled, M. Gad ElRab, C. Habchi, A. Al Shaer, A. Elmarakbi, F. Harambat, and H. Peerhossaini, Analysis and modeling of the thermal soak phase of a vehicle – Temperature and heat flux measurements, International Journal of Automotive Technology, 16 (2015) 221-229.
94) M. Khaled, H. El Hage, F. Harambat, and H. Peerhossaini, Energy management in car underhood – Temperature and heat flux analysis of car inclination effects, Heat Transfer Engineering, 36 (2015) 68-80.
2014
95) M. Khaled, M. Ramadan, H. El Hage, A. Elmarakbi, F. Harambat, and H. Peerhossaini, Review of underhood aerothermal management: towards vehicle simplified models, Applied Thermal Engineering, 73 (2014) 840-856.
96) M. Khaled, M. Ramadan, A. Elmarakbi, F. Harambat, and H. Peerhossaini, Underhood aerothermal management of leakage zones – Temperature measurements, WIT Transactions on Engineering Sciences, 83 (2014) 303-311.
97) F. Hachem, M. Khaled, M. Ramadan, and C. Habchi, Boundary layer development on a concave surface – Flow visualization and hot wire velocity measurements, Journal of Energy and Power Engineering, 8 (2014) 1177-1182.
98) M. Khaled, C. Habchi, A. El Marakbi, F. Harambat and H. Peerhossaini, Leakage effects in car underhood aerothermal management: temperature and heat flux analysis, Heat and Mass Transfer, 50 (2014) 1455-1464.
99) M. Khaled, A. Al Shaer, M. Ramadan, A. Elmarakbi, F. Harambat, and H. Peerhossaini, Sensitivity and applications of a new method for simultaneous measurement of convective and radiative heat fluxes in underhood applications – Towards multiple versions, Measurement Science and Technology, 25 (2014) 035901 (12 PP).
100) C. Habchi, M. Khaled, T. Lemenand, D. Della Valle, A. Elmarakbi, and H. Peerhossaini, A semi-analytical approach for temperature distribution in Dean flow, Heat and Mass Transfer, 50 (2014) 23-30.
101) C. Habchi, T. Lemenand, D. Della Valle, M. Khaled, A. Elmarakbi, and H. Peerhossaini, Mixing assessment by chemical probe, Journal of Industrial and Engineering Chemistry, 20 (2014) 1411-1420.
2013
102) M. Gad El-Rab, M. Khaled, B. Dawoud, and E.H. Amer, Experimental investigation on the effect of the switching frequency on the performance of a thermal wave adsorption heat pump, Mechanics and Industry, 14 (2013) 383-387.
2012
103) M. Khaled, A. Al Shaer, F. Hachem, F. Harambat, and H. Peerhossaini, Effects of ground vehicle inclination on underhood compartment cooling, International Journal of Automotive Technology, 13 (2012) 895-904.
104) M. Khaled, H. El Hage, F. Harambat, and H. Peerhossaini, “Some Innovative Concepts for Car Drag reduction: a Parametric Analysis of Aerodynamic Forces on a Simplified Body”, Wind Engineering and Industrial Aerodynamics, 108 (2012) 36-47.
105) M. Khaled, F. Mangi, H. El Hage, F. Harambat, and H. Peerhossaini, Fan air flow analysis and Heat Transfer Enhancement of Vehicle Underhood Cooling System – Towards a New Control Approach for Fuel Consumption Reduction, Applied Energy, 91 (2012) 439-450.
2011
106) M. Khaled, F. Harambat, H. El Hage, and H. Peerhossaini, Spatial optimization of underhood cooling module – towards an innovative control approach, Applied Energy, 88 (2011) 3841-3849.
107) M. Khaled, F. Harambat, and H. Peerhossaini, Towards the control of car underhood thermal conditions, Applied Thermal Engineering, 31 (2011) 902-910.
108) M. Khaled, F. Harambat, and H. Peerhossaini, Analytical and empirical determination of thermal performance of louvered heat exchanger – effects of air flow statistics, International Journal of Heat and Mass Transfer, 54 (2011) 356-365.
2010
109) M. Khaled, F. Harambat, and H. Peerhossaini, Temperature and Heat Flux Behavior of Complex Flows in Car Underhood Compartment, Heat Transfer Engineering, 31(13): 1-11, 2010.
110) M. Khaled, F. Harambat, and H. Peerhossaini, Underhood Thermal Management: Temperature and Flux Measurements and Physical Analysis, Applied Thermal Engineering, 30 (2010) 590-598.
111) M. Khaled, B. Garnier, F. Harambat and H. Peerhossaini, A New Method for Simultaneous Measurement of Convective and Radiative Heat Flux in Car Underhood Applications, Measurement Science and Technology, 21 (2010) 025903 (10pp).
2009
112) M. Khaled, F. Harambat, and H. Peerhossaini, A quantitative Method for the Assessment of Car Inclination Effects on Thermal Management of the Underhood Compartment, Journal of Thermal Science and Engineering Applications, ASME, 1 (2009) 014501: 1-5.
PUBLICATIONS – CONFERENCES
2019
1) A. Faraj, M. Mortada, K. Chahine, J. Faraj, B. Abdulhay, and M. Khaled, Experimental Study of the Effect of Non-Uniform Airflow Velocity Distribution on the Thermal Performance of a Water-Air Heat Exchanger, International Conference on Emerging and Renewable Energy Generation and Automation (ICEREGA’19), 30 October – 1 November 2019, Istanbul, Turkey.
2) A. Faraj, J. Faraj, S. Ali, W. Salameh, M. Gad El Rab, and M. Khaled, Experimental study of heat recovery from parked vehicles, International Conference on Emerging and Renewable Energy Generation and Automation (ICEREGA’19), 30 October – 1 November 2019, Istanbul, Turkey.
3) A. Faraj, J. Faraj, S. Ali, W. Salameh, E. Harika, M. Mortada, and M. Khaled, Enhancing the Thermal Performance of Vehicle Cooling Modules Using Diffusers, International Conference on Emerging and Renewable Energy Generation and Automation (ICEREGA’19), 30 October – 1 November 2019, Istanbul, Turkey.
4) M. Khaled, J. Faraj, M. Gad El Rab, E. Harika, and C. Castelain, Amélioration des performances thermiques du module de refroidissement d’un véhicule automobile en utilisant des diffuseurs, Congrès Français de Thermique SFT 2019, 3-6 June 2019, Nantes, France.
5) M. Khaled, J. Faraj, B. Abdulhay, W. Salameh, S. Ali, and C. Castelain, Nouvelle approche de détermination du coefficient global d’échange de chaleur des échangeurs - Application aux types eau-air à flux croisés, Congrès Français de Thermique SFT 2019, 3-6 June 2019, Nantes, France.
6) H. Bazzi, J. Faraj, M. Ramadan, S. Ali, and M. Khaled, Nouveau système hybride combinant générateurs thermoélectriques, air chaud de condenseur et débit d’air extrait des systèmes CVC, Congrès Français de Thermique SFT 2019, 3-6 June 2019, Nantes, France.
7) J. Faraj, W. Salameh, E. Harika, H. Bazzi, B. Abdulhay, and M. Khaled, Etude de l’effet de la distribution de température d’air en amont d’un échangeur de chaleur sur sa performance thermique, Congrès Français de Thermique SFT 2019, 3-6 June 2019, Nantes, France.
8) M. Gad El Rab, J. Faraj, W. Salameh, E. Harika, R. Murr, and M. Khaled, Formulation empirique des performances thermiques d’échangeurs de chaleur – Effet de l’hétérogénéité de distribution de vitesse, Congrès Français de Thermique SFT 2019, 3-6 June 2019, Nantes, France.
9) H. Jaber, J. Faraj, M. Ramadan, T. Lemenand et M. Khaled, Système hybride de récupération de chaleur appliqué sur générateurs d’électricité - Effet de la charge du générateur, Congrès Français de Thermique SFT 2019, 3-6 June 2019, Nantes, France.
10) R. Murr, J. Faraj, S. Ali, and M. Khaled, Numerical and Experimental studies of a cooling system using buried pipes, Alternative Energy Sources, Materials & Technologies (AESMT’19), 3-4 June 2019, Sofia, Bulgaria.
11) J. Faraj, S. Ali, R. Murr, and M. Khaled, Experimental study of heat recovery from parked vehicles, Alternative Energy Sources, Materials & Technologies (AESMT’19), 3-4 June 2019, Sofia, Bulgaria.
12) W. Salameh, S. Ali, J. Faraj, R. Murr and, M. Khaled, Improving the efficiency of photovoltaic panels using air exhausted from industrial systems, Alternative Energy Sources, Materials & Technologies (AESMT’19), 3-4 June 2019, Sofia, Bulgaria.
13) S. Ali, M. Khaled, H. Jaber, J. Faraj, R. Murr, and T. Lemenand, Heating/cooling fresh air using hot/cold exhaust air of Heating, Ventilating, and Air Conditioning systems, Alternative Energy Sources, Materials & Technologies (AESMT’19), 3-4 June 2019, Sofia, Bulgaria.
2018
14) R. Murr, M. Khaled, F. Hachem and M. Ramadan, Numerical and experimental analysis of a coiled heat exchanger, The 6th International Conference on Emerging and Renewable Energy: Generation and Automation ICEREGA’18, 28-30 October 2018, Sousse, Tunisia.
15) A. Herez, M. Khaled, H. EL Hage, T. Lemnand, and M. Ramadan, Review on Solar Water Heating System, The 6th International Conference on Emerging and Renewable Energy: Generation and Automation ICEREGA’18, 28-30 October 2018, Sousse, Tunisia.
16) K. Faraj, M. Khaled, Jalal F., F. Hachem, and C. Castelain, Use of phase change materials thermal energy storage systems for cooling applications in buildings: A review, The 6th International Conference on Emerging and Renewable Energy: Generation and Automation ICEREGA’18, 28-30 October 2018, Sousse, Tunisia.
17) K. Faraj, M. Khaled, J. Faraj, F. Hachem, and C. Castelain, A review on phase change materials for thermal energy storage in buildings: Heating and hybrid applications, The 6th International Conference on Emerging and Renewable Energy: Generation and Automation ICEREGA’18, 28-30 October 2018, Sousse, Tunisia.
18) J. Faraj, D. Hakoume, G. Issa, H. Chamseddine, F. Hachem, and M. Khaled, Enhanced residential water heater: Experiments and analysis, 6th European Conference on Renewable Energy Systems, 25-27 June 2018, Istanbul, Turkey.
19) K. Faraj, O. Farhat, A. Hamdan, F. Hachem, M. Khaled, J. Faraj, and Cathy Castelain, Experimental study of underfloor electrical heating system with integrated CO-PCM plates, 6th European Conference on Renewable Energy Systems, 25-27 June 2018, Istanbul, Turkey.
20) M. Khaled, A. El-Mais, M. Hawa, M. Abou Akrouch, M. Ramadan, and F. Hachem, Improving photovoltaic panel performance using a flipping technique, 6th European Conference on Renewable Energy Systems, 25-27 June 2018, Istanbul, Turkey.
21) E. Jari, F. Hachem, H. El Hage, J. Faraj, and M. Khaled, Use of insulation and phase change material in building structures – Experiments and analysis, 6th European Conference on Renewable Energy Systems, 25-27 June 2018, Istanbul, Turkey.
22) M. Khaled, C. Castelain, J. Faraj, and M. Ramadan, Enhancing the thermal performance of vehicle cooling modules using diffusers – Toward energy consumption and CO2 emission reduction, Proceedings of SEEP208, 08-11 MAY 2018, UWS, Paisley, UK.
23) M. Ramadan, A. Haddad, M. Khaled, H. Ramadan, and M. Becherif, Investigation on the coupling of fuel cell with solar chimney and wind turbine systems, Proceedings of SEEP208, 08-11 MAY 2018, UWS, Paisley, UK.
24) T. Ibrahim, F. Hachem, M. Ramadan, and M. Khaled, Numerical comparison between free and forced convection in cooling PV panels, Proceedings of SEEP208, 08-11 MAY 2018, UWS, Paisley, UK.
25) R. Murr, M. Ramadan, H. El Hage, and M. Khaled, AC system performance improvement by using well water, Proceedings of SEEP208, 08-11 MAY 2018, UWS, Paisley, UK.
26) M. Ramadan, M. Khaled, L. Foument, and A.G. Olabi, A hybrid method coupling multimesh and multigrid method, Proceedings of MSSM2018, 07-10 August 2018, UWS, Paisley, UK.
27) M. Ramadan, H. El Hage, M. Khaled, L. Foument, and A.G. Olabi, Effect of the coarsening rate on the performance of multimesh method applied to incremental forming processes, Proceedings of MSSM2018, 07-10 August 2018, UWS, Paisley, UK.
2017
28) A. Haddad, M. Ramadan, M. Khaled, H. Ramadan, and M. Becherif, Analysis and coupling of triple hybrid system: Fuel cell with wind turbine and photovoltaic solar system, The 5th International Conference on Emerging and Renewable Energy: Generation and Automation ICEREGA’17, 4-7 July 2017, Belfort, France.
29) M. Khaled, R. Murr, M. Ramadan, H. Ramadan, and M. Becherif, An iterative algorithm for simulating heat recovery from exhaust gas. Application on generators, The 5th International Conference on Emerging and Renewable Energy: Generation and Automation ICEREGA’17, 4-7 July 2017, Belfort, France.
30) H. Jaber, M. Khaled, T. Lemenand, J. Faraj, A. Haddad, and M. Ramadan, Experimental study on heat recovery using mutli tube tank: Effect of changing the head shape, The 5th International Conference on Emerging and Renewable Energy: Generation and Automation ICEREGA’17, 4-7 July 2017, Belfort, France.
31) H. Jaber, M. Khaled, T. Lemenand, J. Faraj, and M. Ramadan, Numerical simulation on mutli-concentric tubes heat exchanger: Optimization analysis, The 5th International Conference on Emerging and Renewable Energy: Generation and Automation ICEREGA’17, 4-7 July 2017, Belfort, France.
32) A. Haddad, M. Khaled, M. Ramadan, H. Ramadan, and M. Becherif, Investigation on the coupling of fuel cell with photovoltaic and parabolic trough solar systems, Proceedings of the 10th International Conference on Sustainable Energy & Environmental Protection SEEP2017, 27-30 June 2017, Bled, Slovenia.
33) A. Herez, M. Khaled, H. Bazzi, and M. Ramadan, A review on solar dryer – Economic and environmental investigation for the Lebanese case, Proceedings of the 10th International Conference on Sustainable Energy & Environmental Protection SEEP2017, 27-30 June 2017, Bled, Slovenia.
34) H. Jaber, M. Khaled, T. Lemenand, R. Murr, J. Faraj, and M. Ramadan, Triple domestic heat recovery system: Thermal modeling and parametric study, Proceedings of the 10th International Conference on Sustainable Energy & Environmental Protection SEEP2017, 27-30 June 2017, Bled, Slovenia.
35) M. Khaled, M. Ramadan, B. Abdulhay, H. El Hage, and A. Haddad, Performance analysis of heat recovery system from exhaust gases of boiler, Proceedings of the 10th International Conference on Sustainable Energy & Environmental Protection SEEP2017, 27-30 June 2017, Bled, Slovenia.
36) H. Jaber. M. Ramadan, M. Khaled, T. Lemenand, H. El Hage, and A. Haddad, Domestic thermoelectric cogeneration system: Optimization analysis – Effect of changing water volume, International Conference on Energy and Thermal Engineering: ISTANBUL 2017, 25-28 April 2017, Istanbul, Turkey.
37) J. Faraj, N. Boyard, J.L. Bailleul, D. Delaunay, M. Ramadan, and M. Khaled, Thermal investigation of the mass effect on micro-sample temperature homogeneity and crystallization kinetics using a fast scanning calorimeter, International Conference on Energy and Thermal Engineering: ISTANBUL 2017, 25-28 April 2017, Istanbul, Turkey.
38) R. Murr, M. Ramadan, M. Khaled. F. Hachem, H. El Hage, and Y. Aboumsallem, Reduction of fuel consumption and CO2 emissions in automobiles by improving the CO2 supercritical refrigeration cycle, International Conference on Energy and Thermal Engineering: ISTANBUL 2017, 25-28 April 2017, Istanbul, Turkey.
39) K. Ramadan, N. Shouman, F. Hachem, M. Ramadan, and M. Khaled, Experimental study of the use of phase change material to cool photovoltaic cell, 23rd LAAS International Science Conference, Beirut, Lebanon, 6-7 April 2017, Beirut, Lebanon.
40) K. Hariri, S. Damaj, M. Arnaout, Hicham El Hage, M. Ramadan, and M. Khaled, Modeling of horizontal geothermal system, 23rd LAAS International Science Conference, Beirut, Lebanon, 6-7 April 2017, Beirut, Lebanon.
41) S. Damaj, K. Hariri, A. Herez, Hicham El Hage, M. Khaled, and M. Ramadan, Parametric study on vertical geothermal system, 23rd LAAS International Science Conference, Beirut, Lebanon, 6-7 April 2017, Beirut, Lebanon.
42) H. Jaber, T. Lemenand, M. Khaled, H. El Hage, and M. Ramadan, New hybrid het recovery concept applied to exhaust gas, 23rd LAAS International Science Conference, Beirut, Lebanon, 6-7 April 2017, Beirut, Lebanon.
43) A. Mais, R. Ammar, M. Aboakroush, M. Hawa, F. Hachem, M. Khaled, and M. Ramadan, Experimental investigation on different cooling system for photovoltaic solar cells, 23rd LAAS International Science Conference, Beirut, Lebanon, 6-7 April 2017, Beirut, Lebanon.
44) A. Mais, R. Ammar, M. Aboakroush, M. Hawa, F. Hachem, M. Khaled, and M. Ramadan, Using phase change material in under floor heating, 23rd LAAS International Science Conference, Beirut, Lebanon, 6-7 April 2017, Beirut, Lebanon.
45) H, Jaber, A. Haddad, B. Abdulhay, M. Khaled, H. El Hage, and M. Ramadan, Dual energy recovery system to heat water and produce electricity, 23rd LAAS International Science Conference, Beirut, Lebanon, 6-7 April 2017, Beirut, Lebanon.
46) A. Herez, J. Faraj, H. El Hage, M. Khaled, and M. Ramadan, Short review on solar dryer toward an optimal selection, 23rd LAAS International Science Conference, Beirut, Lebanon, 6-7 April 2017, Beirut, Lebanon.
2016
47) H. Jaber, M. Khaled, T. Lemenand, and M. Ramadan, Hybrid heat recovery system applied to exhaust gas of chimneys – Thermal modeling and case study, International Conference on Alternative Fuels – ICAF 2016, Kayseri, Turkey, 02-04 December, 2016.
48) M. Khaled, M. Ramadan, and H. El Hage, Use of parabolic troughs in HVAC applications – Design calculations and analysis, International Conference on Alternative Fuels – ICAF 2016, Kayseri, Turkey, 02-04 December, 2016.
49) M. Ramadan, M. Khaled, H.S. Ramadan, and M. Becherif, An innovative concept combining fuel cell and energy recovery from speed bump, International Conference on Alternative Fuels – ICAF 2016, Kayseri, Turkey, 02-04 December, 2016.
50) A. Khraibani, A. Najdi, A. Makke, M. Gad El Rab, M. Ramadan, and M. Khaled, Heating fresh air by hot exhaust air of HVAC systems, 2nd International Conference on Efficient Building Design: Materials and HVAC Equipment Technologies, Beirut, Lebanon, October, 2016, Presentation without proceedings.
51) M. Khaled, K. Chahine, and M. Ramadan, New concept of power generation from TEG using the exhaust airflow of all-air HVAC systems and the sun irradiation, 2nd International Conference on Efficient Building Design: Materials and HVAC Equipment Technologies, Beirut, Lebanon, October, 2016, Presentation without proceedings.
52) M. Ramadan, K. Chahine, and M. Khaled, New concept of power generation from TEG using the exhaust airflow of all-air HVAC systems and the condenser hot air, 2nd International Conference on Efficient Building Design: Materials and HVAC Equipment Technologies, Beirut, Lebanon, October, 2016, Presentation without proceedings.
53) A. Haddad, K. Chahine, M. Khaled, and M. Ramadan, An investigation on coupling fuel cell and photovoltaic systems for power generation, 2016 3rd International Conference on Advances in Computational Tools for Engineering Applications (ACTEA), Loueizeh, Lebanon, July, 2016.
54) M. Khaled, M. Ramadan, and L. Fourment, Thermal Modeling of Cogging Process Using Finite Element Method, 19th ESAFORM Conference, Nantes, France, 2016.
55) M. Ramadan, M. Khaled, and L. Fourment, Application of Multi-Grid Method on the Simulation of Incremental Forging Processes, 19th ESAFORM Conference, Nantes, France, 2016.
56) M. Khaled, H. Beltagy, A. Shaito, H. El Hage, and M. Ramadan, Heating residential water using parabolic trough concentrators – Theoretical calculations and analysis, TMREES16 International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability, Beirut, Lebanon, 2016.
57) M. Ramadan, A. Shaer, A. Haddad, and M. Khaled, An experimental study on recovering heat from domestic drain water, TMREES16 International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability, Beirut, Lebanon, 2016.
58) A. Herez, M. Ramadan, B. Abdulhay, and M. Khaled, Short review on solar energy systems, TMREES16 International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability, Beirut, Lebanon, 2016.
59) H. Jaber, M. Khaled, T. Lemenand, and M. Ramadan, Short review on heat recovery from exhaust gas, TMREES16 International Conference on Technologies and Materials for Renewable Energy, Environment and Sustainability, Beirut, Lebanon, 2016.
60) F. Hachem, M. Ramadan, M. Gad El Rab, K. Chahine, and M. Khaled, Using pure and combined phase change materials in cooling photovoltaic cells, The 4th International Conference on Renewable Energy: Generation and Applications ICREGA’16, Belfort, France, 2016.
61) M. Khaled, F. Hachem, M. Gad El Rab, H. El Hage, and M. Ramadan, Use of parabolic troughs in HVAC applications – Design calculations and analysis, The 4th International Conference on Renewable Energy: Generation and Applications ICREGA’16, Belfort, France, 2016.
62) K. Chahine, M. Ramadan, M. Khaled, Z. Merhi, and H. Jaber, Power generation from TEG: Parametric analysis and new concept, The 4th International Conference on Renewable Energy: Generation and Applications ICREGA’16, Belfort, France, 2016.
2015
63) M. Khaled, F. Hachem, M. Gad El Rab, and M. Ramadan, Cooling photovoltaic cells using phase change materials – Experiments and economical study, The 7th World Congress on Power and Energy Engineering WCPEE2015, Cairo, Egypt, 2015.
64) M. Gad El Rab, M. Khaled, M. Ramadan, and A. Al Hassanieh, Modeling of a solar lithium bromide-water absorption air conditioner in Beirut, The 7th World Congress on Power and Energy Engineering WCPEE2015, Cairo, Egypt, 2015.
65) M. Khaled, M. Ramadan, A. Elmarakbi, and F. Harambat, Analytical determination of louvered-fin heat exchanger thermal performance in relation with the air flow statistics, Advances in Computational Heat Transfer, Piscataway, USA, 25-29 May 2015,.
66) A. Ali, H. Shams Eldine, K. Chahine, M. Ramadan, and M. Khaled, Experimental study of heat exchanger thermal performance - Effect of non-uniformity, 21th LAAS International Science Conference, Beirut, Lebanon, 15-17 April 2015.
67) Z. Wehbi, M. Mortada, K. Chahine, M. Ramadan, and M. Khaled, Flowmeter for gas flow rate measurement at high temperatures, 21th LAAS International Science Conference, Beirut, Lebanon, 15-17 April 2015.
68) A. Khraibani, A. Najdi, A. Makke, M. Gad El Rab, M. Ramadan, and M. Khaled, Heating/Cooling fresh air from hot/cold exhaust air of HVAC systems, 21th LAAS International Science Conference, Beirut, Lebanon, 15-17 April 2015.
69) S. El Shoufi, S. Kouzian, M. Khaled, and M. Ramadan, Using parabolic trough for water heating, 21th LAAS International Science Conference, Beirut, Lebanon, 15-17 April 2015.
70) P. Houwayek, M. Khoury, M. Khaled, and M. Ramadan, On the recovery of HVAC systems waste heat, 21th LAAS International Science Conference, Beirut, Lebanon, 15-17 April 2015.
71) H. Jbara, A. El bast, M. Ramadan, and M. Khaled, A design of clothes dryer using the heat recovered from HVAC systems, 21th LAAS International Science Conference, Beirut, Lebanon, 15-17 April 2015.
72) B. Haidar, L. Doumanian, M. Khaled, and M. Ramadan, Selection and Classification of Heat Exchangers for Energy applications, 21th LAAS International Science Conference, Beirut, Lebanon, 15-17 April 2015.
2014
73) M. Khaled, M. Ramadan, and M. Gad El Rab, Application of waste heat recovery concepts to generators – Thermal modeling and parametric analysis, The Second International Conference on Renewable Energy for Developing Countries REDEC 2014, Beirut, Lebanon, 26-27 November 2014.
74) M. Gad El Rab, M. Ramadan, and M. Khaled, Power Generation from Solar Chimney in Lebanon - Thermodynamic Analysis, The Second International Conference on Renewable Energy for Developing Countries REDEC 2014, Beirut, Lebanon, 26-27 November 2014.
75) M. Ramadan and M. Khaled, Recovering Heat from Shower Water - Design calculation and prototype, The Second International Conference on Renewable Energy for Developing Countries REDEC 2014, Beirut, Lebanon, 26-27 November 2014.
76) M. Khaled, M. Ramadan, C. Habchi, M.Chouman, and F. Hachem, Heating water using the recovered waste heat from boilers in HVAC applications – Thermal modeling and parametric analysis, International Conference on Efficient Building Design: Materials and HVAC Equipment Technologies, Beirut, Lebanon, 2-3 October 2014.
77) M. Ramadan, M. Khaled, M. Gad El Rab, and F. Hachem, A review on HVAC Heat Recovery Systems, International Conference on Efficient Building Design: Materials and HVAC Equipment Technologies, Beirut, Lebanon, 2-3 October 2014.
78) W. Salameh, A. Assi, C. Habchi, and M. Khaled, Cooling PV arrays using the return air flow of air conditioning systems, International Conference on Efficient Building Design: Materials and HVAC Equipment Technologies, Beirut, Lebanon, 2-3 October 2014.
79) C. Habchi, M. Khaled, M. Ramadan, and G. Harika, Fire management of underground car park using computational fluid dynamics, International Conference on Efficient Building Design: Materials and HVAC Equipment Technologies, Beirut, Lebanon, 2-3 October 2014.
80) M. Khaled, M. Ramadan, B. Abdulhay, and F. Harambat, Formulation empirique des performances thermiques d’échangeurs de chaleur – Effet de l’hétérogénéité de distribution de vitesse, Congrès Français de Thermique 2014, Approche multi-échelles pour la thermique, l’énergétique et la génie des procédés, Poster Presentation, Lyon, France, 2014.
81) M. Ramadan, M. Khaled, A. Al Shaer, H. El Hage, and F. Hachem, Etude d’une nouvelle conception permettant de chauffer l’eau domestique par la chaleur libérée par les systèmes CVC, Congrès Français de Thermique 2014, Approche multi-échelles pour la thermique, l’énergétique et la génie des procédés, Poster Presentation, Lyon, France, 2014.
82) M. Ramadan, M. Khaled, M. Gad El Rab, M. Hammoud, and A. Shaito, Réduction de la consommation d’énergie par un système efficace de récupération de la chaleur de l’eau de douche – Analyse expérimentale, Congrès Français de Thermique 2014, Approche multi-échelles pour la thermique, l’énergétique et la génie des procédés, Poster Presentation, Lyon, France, 2014.
83) M. Khaled, M. Ramadan, A. Al Shaer, and F. Harambat, Etude de l’effet de la distribution de température d’air en amont d’un échangeur de chaleur sur sa performance thermique, Congrès Français de Thermique 2014, Approche multi-échelles pour la thermique, l’énergétique et la génie des procédés, Poster Presentation, Lyon, France, 2014.
84) M. Khaled, M. Ramadan, A. Elmarakbi, F. Harambat, and H. Peerhossaini, Underhoodaerothermal management of leakage zones – Temperature measurements, Heat Transfer 2014 – 13th International Conference on Simulation and Experiments in Heat Transfer and its Applications, A Coruña, Spain, 2014.
85) A. Moshawrab, M. Darwich, F. Hajj, M. Ramadan, and M. Khaled, Using speed-bump for power generation - Prototype and experimental study, 20th LAAS International Science Conference, Hadath, Lebanon, 2014.
86) I. Hamiye, J. Faroukh, H. Hassaui, A.Assi, C. Habchi, and M. Khaled, Design of Micro-Hydropower System – Case Study, 20th LAAS International Science Conference, Hadath, Lebanon, 2014.
87) M., A. Eid, F. Hajj, M. Khaled, and M. Ramadan, Recovering heat from shower water - Prototype development and experimental study, 20th LAAS International Science Conference, Hadath, Lebanon, 2014.
88) M. Ramadan, M. Khaled, M. El Kady, and H. El Hage, Generating power from Speed-Bump. Prototype development and experimental study, 17th IEEE Mediterranean Electrotechnical Conference, Beirut, Lebanon, 2014.
89) M. Ramadan, M. Khaled, B. Abdulhay, M. Hammoud, and A. Shaito, Using parabolic trough concentrators with tracking system for heating residential water, ASME 12th Biennial Conference on Engineering Systems Design and Analysis ESDA 2014, Copenhagen, Denmark, 2014.
90) M. Ramadan, M. Khaled, A. Al Shaer, M. Hammoud, and H. El Hage, Using iterative code for thermal performance prediction of concentric tube heat exchanger – Parametric analysis, ASME 12th Biennial Conference on Engineering Systems Design and Analysis ESDA 2014, Copenhagen, Denmark, 2014.
2013
91) M. Ramadan, M. Khaled, M.F. Khalil, C. Habchi, L. Stainier, and A. Leroyer, A conservative algorithm for fluid-structure interaction problems, Eleventh International Conference of Fluid Dynamics ICFD11, Alexandria, Egypt, 2013.
92) M. Khaled, M.F. Khalil, M. Ramadan, C. Habchi, F. Harambat, and H. Peerhossaini, Effect of engine blockage on the flow induced by a vehicle fan in a simplified model, Eleventh International Conference of Fluid Dynamics ICFD11, Alexandria, Egypt, 2013.
93) F. Hachem, M.F. Khalil, C. Habchi, and M. Khaled, Boundary layer development on a concave surface – Flow visualization and hot wire velocity measurements, Eleventh International Conference of Fluid Dynamics ICFD11, Alexandria, Egypt, 2013.
94) M. Ramadan, M. Khaled, M. Gad El Rab, F. Hachem, and H. Harambat, Development of two-dimensional code for heat exchanger thermal performance prediction – Effects of airflow velocity distribution, International Conference on Microelectronics ICM 2013, Beirut, Lebanon, 2013.
95) M. Ramadan, M. Khaled, F. Hachem, A. Al Shaer, K. Chahine, and A. Assi, Design and analysis of an HVAC-Based heat recovery system, International Conference on Microelectronics ICM 2013 Special Issue on Renewable Energy, Beirut, Lebanon, 2013.
96) M. Khaled, M. Ramadan, M. Gad El Rab, K. Chahine, and A. Assi, Heating water using the recovered chimney waste heat – Prototype and experimental analysis, International Conference on Microelectronics ICM 2013 Special Issue on Renewable Energy, Beirut, Lebanon, 2013.
97) C. Habchi, S. Russeil, D. Bougeard, J.L. Harion, M. Khaled, and A. Elmarakbi, Intensification du transfert de chaleur par des générateurs de vorticité et des protrusions, Proc. Société Française de Thermique, Gerardmer, France, 2013.
98) M. Gad El-Rab, M. Khaled, B. Dawoud, E.H. Amer, Etude Expérimentale de l’effet de la fréquence de commutation sur les performances d’une pompe à chaleur à adsorption par onde thermique, Proc. Congrès Français de Mécanique, Bordeaux, France, 2013.
99) F. Hachem, M. Khaled, C. Habchi, A. El Marakbi, Visualisation d’écoulement et analyses de profils de vitesse sur une surface concave pour des applications de turbines à gaz, Proc. Congrès Français de Mécanique, Bordeaux, France, 2013.
100) M. Khaled, S. Ali, F. Hachem, A. El Marakbi, F. Harambat, and H. Peerhossaini, Amélioration des performances thermiques du module de refroidissement d’un véhicule automobile – Nouvelle approche de contrôle pour réduction de la consommation de carburants, Proc. Congrès Français de Mécanique, Bordeaux, France, 2013.
101) M. Khaled, H. El Hage, A. El Marakbi, F. Harambat, and H. Peerhossaini, Aerothermal management of vehicle heat exchangers – Parametric analysis, Proc. ASME Fluids Engineering Division SummerConference, Nevada, USA, 2013.
102) M. Khaled, C. Habchi, H. El Hage, A. El Marakbi, F. Harambat, and H. Peerhossaini, Aerothermal analysis of vehicle thermal soak – Temperature and heat flux measurements, Proc. ASME Fluids Engineering Division SummerConference, Nevada, USA, 2013.
2010
103) M. Khaled, A. Yammine, D. Hamadi, F. Harambat, and H. Peerhossaini, Fluxmetric Analysis of Car Inclination Effects on the Thermal Management of Underhood Top Region, Proc. ASME Fluids Engineering Division Summer Conference, Montréal, Canada, 2010.
104) M. Khaled, A. Yammine, F. Harambat, and H. Peerhossaini , Optimization and Active Control of the Underhood Cooling System – A Numerical Analysis – A Numerical Analysis, Proc. ASME Fluids Engineering Division Summer Conference, Montréal, Canada, 2010.
105) M. Khaled, A. Yammine, F. Harambat, and H. Peerhossaini , Active Control of Air Flow in Vehicle Underhood Compartment – Temperature and Heat Flux Analysis, Proc. ASME Fluids Engineering Division Summer Conference, Montréal, Canada, 2010.
106) M. Khaled, A. Yammine, F. Harambat, and H. Peerhossaini, Aerodynamic Forces on a Simplified Car Body – Towards Innovative Designs for Car Drag Reduction, Proc. ASME Fluids Engineering Division Summer Conference, Montréal, Canada, 2010.
2009
107) M. Khaled, F. Harambat, and H. Peerhossaini, Analyse Fluxmétrique des Effets des Fuites sur les Températures du Compartiment Moteur – Applications de nouvelles Méthodes, Proc. Congrès Français de Thermique 2009, Vannes, France, 2009.
108) M. Khaled, F. Harambat, and H. Peerhossaini, Heat Transfer Mode Analysis in Complex Internal Flows, Proc. Int. Symp. on Convective Heat and Mass Transfer in Sustainable Energy, Hammamet, Tunisie, 2009.
109) M. Khaled, F. Harambat, and H. Peerhossaini, Temperature and Heat Flux Measurements in Complex Internal Flows, Proc. 4th Int. Conference on Thermal Engineering Theory and Applications, Abu Dhabi, UAE, 2009.
110) C. Habchi, M. Khaled, T. Lemenand, D. Della Valle, and H. Peerhossaini, The Temperature Distribution in Dean Flow: An Analytical Approach, Proc. 4th Int. Conference on Thermal Engineering Theory and Applications, Abu Dhabi, UAE, 2009.
2008
111) M. Khaled, F. Harambat, and H. Peerhossaini, Gestion Aérothermique des Zones de Fuites du Compartiment Moteur d’un Véhicule Automobile, Proc. Congrès Français de Thermique 2008, Toulouse, France, 2008.
112) M. Khaled, F. Harambat, and H. Peerhossaini, Effects of Car Inclination on Air Flow and AerothermalBehaviour in The Underhood Compartment, Proc. ASME Fluids Engineering Division SummerConference, Florida, USA, 2008.
PUBLICATIONS – BOOK CHAPTERS
2023
K. Faraj, M. Khaled, J. Faraj, F. Hachem, and C. Castelain, 12 - Phase change materials (PCMs) in buildings, In: Woodhead Publishing Series in Composites Science and Engineering, K. Pielichowska and K.Pielichowski (Eds), Multifunctional Phase Change Materials, Woodhead Publishing, 2023, pp. 507-567. ISBN 9780323857192. https://doi.org/10.1016/B978-0-323-85719-2.00003-1.
PATENTS
2010
1) M. Khaled, F. Harambat, and H. Peerhossaini, Véhicule Automobile à Ecoulement d’Air de Refroidissementoptimisé”, French patent application filed on January 20 2010, Patent n°1050365.
2) M. Khaled, F. Harambat, and H. Peerhossaini, Véhicule Automobile Présentant un Refroidissement Optimisé”, French patent application filed on January 22 2010, Patent n°1050417.
2009
3) M. Khaled and F. Harambat, Dispositif de Mesure de Flux Thermique et Méthode de Séparation des Flux Radiatif et Convectif, French patent application filed on February 10 2009, Patent n°0950799.