Our panniers and top boxes are TIG welded of .080” (2mm) aluminum, among the thickest in the industry, and no glue or rivets are used in construction.
Panniers are easily removable with our puck mounting system. A couple of turns on each of the two knobs inside the pannier, and it is released. It takes about 10 seconds per pannier. See Installation Photos
High quality cam latches give you the best gasket seal in the industry... our panniers and top boxes have no leaks! Each is lockable with two padlocks (not included). Lids come with footman loops for strapping on additional gear. 4 footman loops are standard on each lid.
If you plan to carry larger items on your pannier or top box lids, our lid racks offer additional tie down positions. (Photo below.)
All panniers and
top boxes have our new Slot Hinge Design™ (photo below) an industry
leading technology designed to meet the needs of today's adventure touring. The
Slot Hinge Lid™ has a pivot hinge on the outside of the pannier. When running
panniers with a top box some riders convert panniers to lift-off lids, easily
done by removing the one hinge-screw on each hinge. All panniers and top boxes
come with the hinged design for liability purposes... no exceptions are
Canyon-cut is a term describing a 45 degree bevel cut on the bottom outside edge of our panniers. This is a safety feature. If you go down, a 90 degree angle will dig into the road surface. A 45 degree angle is more likely to slide, a less violent event for the box, the rack and the bike. Top Boxes are Canyon Cut to provide clearance for pannier opening. It also offers visual symmetry with the panniers and breaks up the square look of the box. We do offer a top box with no Canyon Cut for applications where square corners are more suitable.
We recommend powder coating on our panniers to avoid the black oxidation that can form and rub on clothing and stored items. In addition, bare aluminum panniers will have imperfections and scratches in the metal from the manufacturing process. We offer two powder coat choices:
When choosing pannier/top box colors black is always a safe bet bevcause it always matches. Matching silvers and grays is more difficult.
All our industry leading pannier kits feature our exclusive and thoroughly tested SU rack designed for use with soft or fixed luggage/panniers. The SU rack utilizes strong 5/8" round tubing for the arms and 3/4" square tubing for the SU loop. Racks are bike specific, with a three point mounting design and a bumper support bracket between the two sides. (Photo below.)
Pre-mounting consists of drilling four holes in the pannier for the pannier to be mounted in a neutral position. We define neutral position as comfortable for rider and passenger in normal riding conditions. All pictures of mounted panniers on our website show panniers in this position. All panniers are designed for two-up riding.
"Puck" describes the attachment hardware that bolts to the pannier for mounting it it to the rack.
Clif-cut is a term describing a 1.5" exhaust cut-out used on bikes with wide protruding pipes to create a more symmetrical weight distribution when panniers are mounted and loaded. It keeps the load on the exhaust side box as close as possible to the center of the bike. Popular applications for Clif-Cut are: Triumph Tiger 2000-2004; BMW F800-650 Twin; Honda XR650L.