Embedded Files
Sensor Mount (Second Iteration)
Figure 9: CAD Assembly of sensor mount, Second iteration.
Figure 10: 3D Printed Assembly of sensor mount, Second iteration.
Figure 11: 3D Printed sensor mount on glasses
Figure 12: Elana is wearing her glasses with the 3D Printed sensor mount.
Sensor Mount (First Iteration)
Figure 6: Components of the first iteration of the sensor mount: meant to imitate a sliding cover of a calculator.
Figure 7: Closer shot of the sensor casing component
Figure 8: Assembly of sensor mount, first iteration.
Wearable System (First Iteration)
Figure 3: The solution to our wiring concerns: wire, if draped in the back, does not impede the user's motion or compromise comfort.
Figure 4: We plan to mount the camera to the front of the hat.
Figure 5: In order for the wire to be draped over the user's shoulder, loops need to be sewn on along the sides of the hat to guide the wire to the back.
Testing Procedure (Lepton)
Figures 1-2: Measurement of temperatures of clay heat pack with Lepton 3.5 and comparing those to the temperatures measured by a laser gun and Arduino sensor.
Page updated
Report abuse