Embedded Files
Design Key Components
Design Key Components
Components considered for the current design of the project
Final Design
Final Design (Top View)
CAD Final Design
CAD Final Design (Wire Rack Top)
CAD Final Foundational Design
Edstrom Sipper Valve
Toggle Value
TE Connectivity Pressure Sensor
ESP32 Microcontroller
Custom PCB
Air Buffer System
Photo Interrupter Sensor
Sillicone Tubing for Air
Ultra Chemical Resistant Tubing for Alcohol
Devices/Materials Used in Testing
Devices/Materials Used in Testing
Though not direct components of the project, many of these materials were used in iterative testing of the pressure sensor.
Arduino MEGA 2650
2-20μL Micropipette
20μL Micropipette Tips
Previous Designs/Key Components Considered
Previous Designs/Key Components Considered
This archive is composed of other sensors and prototypes that were iterated through in the design process
NIH Prototype Lickometer
Prototype found on an open source, was rebuilt and tested
NIH Prototype CAD Models
CAD models derived from open source project
Milone eTape Liquid Level Sensor
First fluid sensor considerred; discontinued this option because of lack of resolution
Milone eTape Testing
Old Test Circuit Board
MS4515 Air Buffer Final Setup
MS4515 Connected to Water
LM31 Testing
Steve Robert's Air Buffer Setup
Meet the Team
Meet the Team
Pictures of our team and sponsor
Start of the Project
Final Presentation
Final Presentation with Sponsor
Page updated
Report abuse