Research Interest
· Machining of difficult to cut materials
· Machining process optimization
· Non-conventional machining
Micromachining
Book Published
1. Energy and Environment Engineering, First Edition, 2017, Synergyware Publications, Mumbai
Book Chapter
1. Monitoring of Machining Processes, Prediction of surface Roughness and its correlation with Acoustic Emission Parameters in AISI 303 Steel, LAP Lambert Academic Publishing, March 2020, ISBN 978-620-2-51716-4
2. Machining Performance Evaluation of Ti-6Al-4V Alloy in CNC Turning using CBN Insert, Apple Academic Press, CRC Press, Submitted in July 2021.
3. Modelling of Surface Roughness Using ANN and Correlation with Acoustic Emission Signals in Turning of AISI 303 Steel , Springer Nature Singapore Pte. Ltd. N. Sharma et al. (eds.), Data Management, Analytics and Innovation, Lecture Notes on Data Engineering and Communications Technologies 70., September 2021.
4. Parametric evaluation in context to functional role of Eco-friendly Water Vapour Cutting Fluid through Chip Deformation analysis in HSM of Inconel 718, Manufacturing and Processing of Advanced Materials, Edited by Ricardo Dias, Antonio A. Martins, Rui Lima and Teresa M. Mata (Eds), Bentham Science Publishers, 2021, 3-19.
Journal Editorial Board
Editorial Board Member, Journal of Modern Industry and Manufacturing, Innovation Forever Publishing Group Limited, Sept. 2021- Sept. 2024.
Selected Publications - Total 202 (No. of citations = 1611, h-index=16, i-10 index = 24)
Referred Journals - 59
1. R. S. Pawade, Suhas S. Joshi, P. K. Brahmankar, M. Rahman, An Investigation of Cutting Forces and Surface Damage in High-Speed Turning of Inconel 718, Journal of Materials Processing Technology, 2007, Vol. 192-193, pp. 139-146.
2. R. S. Pawade, Suhas S. Joshi, P. K. Brahmankar, Effect of Cutting Edge Geometry and Machining Parameters on Surface Integrity of High-Speed Turned Inconel 718, International Journal of Machine Tools and Manufacture, 2008, Vol. 48 (1), pp. 15-28.
3.R. S Pawade, Suhas S. Joshi, P. K. Brahmankar and J. Ramkumar, Effect of Electrode Shape and Rotation on EDM performance of Inconel 718, International Journal of Mechanical Engineering and Materials Science, 2009
4.R. S. Pawade, Harshad Sonawane and Suhas S. Joshi, An Analytical Modeling to Predict Specific Cutting Energy in Shear Deformation in High-speed Turning of Inconel 718, International Journal of Machine Tools and Manufacture, 2009, Vol. 49 (12-13), pp. 979-990.
5.R. S. Pawade and P. K. Brahmankar, Optimization of Powder Mixed EDM (PMEDM) Process with Multiple Performance Characteristics Using Taguchi Based Grey Relational Analysis, Journal of Machining and Forming Technology, Vol.3 (2-3), 2010.
6. R. S Pawade, Suhas S. Joshi, Mechanism of Chip Formation in High-speed Turning of Inconel 718, Machining Science and Technology, Vol. 15 (1), 2011, pp.1532-2483,
7. R. S Pawade, Suhas S. Joshi, Multi-objective Optimization of Surface Roughness and Cutting Forces in High-speed Turning of Inconel 718 using Taguchi Grey Relational Analysis (TGRA), International Journal of Advanced Manufacturing Technology, Vol. 56, No. 1, pp.47-62, 2011.
8. R. S Pawade, Suhas S. Joshi, Analysis of Acoustic Emission Signals and Surface Integrity in High-speed Turning of Inconel 718, Journal of Engineering Manufacture, Institution of Engineers, Part B, Vol. 126 (1), 2012, pp. 3-27.
9. R S Pawade, S S Joshi, H Sonawane, N N Bhopale, Analysis and Modelling of Cutting Forces in Ball end Milling of Super Alloy Inconel 718, Journal of Institution of Engineers (India), Mechanical Engineering, Vol. 92, 2011, PP. 3-7.
10. A. D. Bagawade, P. G. Ramdasi, R. S. Pawade, P. K. Brahmankar, Machining optimization models for hard turning: A review, International Journal of Mechanical Engineering and Research, Vol. 1 (1), 2012, pp. 55-60.
11. Sandeep Huddedar, Pankaj Chitalkar, Arvind Chavan and Raju S. Pawade, Effect of Cooling Environment on Grinding Performance of Nickel Based Superalloy Inconel 718, Journal of Applied Sciences, Vol. 12 (10),2012, pp. 947-954
12. Arvind Chavan, Yogesh Gaikhe, Sandeep Huddedar and Raju Pawade, 3D Surface Characterization of Electrophoretic Deposition Assisted Polishing of SS316L. Journal of Applied Sciences, Vol. 12 (10), 2012, pp. 929-937
13. K.A. Jagtap R. S. Pawade R. Balasubramaniam, Some Investigations on Surface characteristics in Precision Turning of Nylon and Polypropylene, Special Issue of International Journal of electronics, Communication & Soft Computing Science & Engineering, ISSN: 2277-9477, 2012, pp. 236-240.
14. Harshad Sonawane, Raju S. Pawade, Effects of Powder Mixed Dielectric on Electro-discharge Machining (PMEDM) of HSS Tool Steel, submitted to International Journal of Mechatronics and Manufacturing Systems, Special Issue on Electric Discharge Machining, Vol. 5 (5-6), 2012, pp. 431-454.
15. A. D. Bagawade, P. G. Ramdasi, R. S. Pawade, P. K. Brahmankar, Evaluation of Cutting Forces in Hard Turning of AISI 52100 Steel by using Taguchi Method, International Journal of Engineering Research and Technology, Vol. 1 (6), 2012, pp. 1-5.
16. Nandkumar N. Bhopale, Raju S. Pawade, Investigation of Surface Integrity in High-sped Ball End Milling of Cantilever Shaped Thin Plate of Inconel 718, Journal of Achievements in Materials and Manufacturing Engineering, Vol. 55 (2), December 2012, pp. 616-622.
17. A. D. Bagawade, P. G. Ramdasi, R. S. Pawade, P. K. Brahmankar, The effects of Cutting Conditions on Chip Area Ratio and Surface Roughness in Hard Turning of AISI 52100 Steel, International Journal of Engineering Research and Technology, Vol. 1 (10), 2012, pp. 1-6.
18. Ganesh Kadam, D S N Reddy and Raju S Pawade, Chip Segmentation Behaviour and Surface Topography in High-speed Turning of Titanium alloy (Ti-6Al-4V) with Ecofriendly Coolant, submitted to International Journal of Machining and Machinability of Materials (IJMMM) Special Issue on: "Machining of Aerospace Materials", Vol. 13, No. 2-3, pp.113-137, 2013
19. Yogesh S. Gaikhe, Arvind M. Chavan, R. S. Pawade, 3D Surface Characterization of Electrophoretic Deposition Assisted Polishing of Stainless Steel 316L, Materials and Manufacturing Processes, Vol. 28, pp.676–682, 2013
20. Mitali S. Mhatre, Sagar U. Sapkal and Raju S. Pawade, Electro discharge machining characteristics of Ti-6Al-4V alloy: A grey relational optimization, International Conference on Advances in Manufacturing and Materials Engineering, AMME, Procedia Materials Science, Elsevier Vol. 5, pp. 2014 – 2022, 2014
21. Prasad Pawase, P.K. Brahmankar, R.S. Pawade, R. Balasubrahmanium, Analysis of Machining mechanism in Diamond turning of Germanium lenses, International Conference on Advances in Manufacturing and Materials Engineering, AMME, Procedia Materials Science, Elsevier Vol. 5, pp. 2363 – 2368, 2014
22. Nandkumar N. Bhopale, Suhas S. Joshi & Raju S. Pawade, Experimental Investigation into the Effect of Ball End Milling Parameters on Surface Integrity of Inconel 718, Journal of Materials Engineering and Performance, ASM International, 2015, Vol 23 (12), pp. 4163-4176.
23. Ganesh Sonawane, Raju Pawade, Analysis of cutting forces in high speed turning of Inconel 718 by using ceramic tools, International Journal of Research and Scientific Innovation, Vol. 1, Issue 6, 2014, pp. 107-112.
24. Nandkumar N. Bhopale, Raju S. Pawade, Effect of ball end milling parameters on surface and subsurface of Inconel 718, International Journal of Basic and Applied Sciences, Vol. 4, Issue 1, 2015, UImpact Factor: 1.201
25. Nandkumar N. Bhopale, Raju S. Pawade, Modelling and analysis of ball end milling parameters of Inconel 718 cantilever using RSM, International Journal of Innovative Research in Science, Engineering and Technology, Vol. 3, Issue 12, 2014, pp. 18336-18343, Impact Factor:1.682
26. N.G.Patil, Ameer Asem, R. S. Pawade, D.G. Thakur, P.K. Brahmankar, Comparative study of high speed machining of Inconel 718 in dry condition and by using compressed cold carbon dioxide gas as coolant, Procedia CIRP Vol. 24, 2014, pp. 86 – 91
27. Sunil Sanap, Sagar Sakharkar, Pankaj Sonawane, Raju Pawade, Multi-objective optimization of ball end milling of Inconel 718 using Utility concept, International Journal of Mechanical Engineering and Material Science, Vol. 8 (1), January-June 2015, pp. 27-33, ISSN: 0974-584X
28. Ramesh Guttedar, Amit Patil, A. A. Jadhav, V. B. Satve, Raju Pawade, Design and Development of Horn and Slurry Circulation System in Ultrasonic Machining, International Journal For Technological Research In Engineering (IJTRE),Volume 2, Issue 7, March-2015, ISSN: 2347-4718
29. Mitali S. Mhatre, Raju S. Pawade, Sagar U. Sapkal, Fauzia Siddiqui, Prediction of EDM process parameters by using Artificial Neural Network (ANN) - A Prediction Technique, International Journal of Scientific & Engineering Research, Volume 5, Issue 12, December-2014 pp. 29-33, ISSN 2229-5518.
30. Nandkumar N. Bhopale, Nilesh Nikam and Raju S. Pawade, Parameter Optimization of Ball End Milling Process on Inconel 718 Using RSM and TLBO Algorithm, Journal for Manufacturing Science and Production, DE GRUYTER, pp. 1-8, DOI 10.1515
31. Nandkumar N. Bhopale, Nilesh Nikam and Raju S. Pawade, International Journal of Materials Forming and Machining Processes, 2(2), pp. 1-16, IGI Global, July-December 2015, DOI: 10.4018/IJMFMP.2015070101
32. Nandkumar Bhopale, Raju Pawade, Suhas Joshi, Surface quality analysis in ball end milling of Inconel 718 cantilevers by response surface methodology, Proceedings ImechE, Part B: Journal of Engineering Manufacture, 2015, pp. 1-13.
33. Bhagwan F Jogi, Monish Tarekar, Rinul M Dhajekar, Raju Pawade, Multi Objective Optimization Using Taguchi Grey Relational Analysis (GRA) for CNC Turning of Poly-ether-ether-ketone (PEEK) Polymer, Polymers & Polymer Composites, Vol. 24, No. 7, 2016, ©Smithers Information Ltd., 2016.
34. Ganesh Kadam, Raju S. Pawade, Sustainability modelling and assessment in high-speed turning of Inconel 718, International Journal of Precision Technology, Inderscience, Special Issue on Modelling and Simulation of Precision Machining Processes, Vol. 6, Nos. 3/4, 2016, pp. 249-261.
35. K. A. Jagtap, R. S. Pawade and K. V. Giradkar, Investigations on Machined Surface Integrity and Electrochemical behaviour of Co-Cr-Mo Bio-implant Alloy, International Journal of Advanced Design and Manufacturing Technology, Vol. 9/ No. 4, 2016, PP. 51-58, IAU, Majlesi Branch
36. Ganesh Kadam, Raju S. Pawade, Surface integrity and sustainability assessment in high-speed machining of Inconel 718 – An eco-friendly green approach, Journal of Cleaner Production, Elsevier, Vol. 147, 2017, pp. 273-283.
37. Ganesh Kadam, Raju S. Pawade, Water Vapour as Eco friendly Cutting fluid- Parametric Explorations in HSM of Inconel 718, Journal of Materials Scienec and Surface Engineering, Vol. 5, (7), 2017, pp. 679-684
38. Nilay N Khobragade, Ankur V Bansod, Karan V Giradkar, Awanikumar P Patil, Ketan A Jagtap, Raju Pawade and Abhijeet Moon, Effect of Concentration and Surface Roughness on Corrosion Behavior of Co-Cr-Mo Alloy in Hyaluronic Acid, Materials Research Express, IoP Science Journal, Accepted Manuscript online 8 January 2018 • © 2018 IOP Publishing Ltd, UK, Impact Factor 1.06
39. Yadav S, Saraf A, Pawade R, Sadaiah M. "Development of Super Paramagnetic Particles from Waste Etchant in Photochemical Machining", International Journal of Advanced Manufacturing Technologies, Springer, 2017. (Decision Pending)
40. Yadav S, Sangoi A, Pawade R. " Development of Mathematical Model and Characterization of Internal Surface obtained by Elasto-Abrasives Magnetic Finishing", Journal of Alloys and Compounds, 2020, submitted for publication
41. Sagar Sakharkar, Raju S. Pawade, Effect of Machining Environment on Turning Performance of Austempered Ductile Iron, CIRP Journal of Manufacturing Science and Technology, May 2018, Vol. 22, pp. 49-65, Elsevier.
42. Julfekar Arab, Pradeep Dixit, Prakash Brahmankar, Raju Pawade, Arvind Kumar Srivastava, Micro-Faraday cup array structures fabrication in Silicon using Deep Reactive Ion Etching, International Journal of Precision Technology, Inderscience Publishers, July 2018.
43. S M Banait, Jinoop A N, H Kumar, Raju Pawade, Kushvindre Bindra, C P Paul, Experimental Investigation on Laser Directed Energy Deposition of Functionally Graded Layers of Ni-Cr-B-Si and SS316L, Journal of Optics and Laser Technology, Vol. 121, pp. 105787, Elsevier.
44. Nikhil V Khatekar, Raju S Pawade, Analysis and modeling of surface characteristics in electrophoretic deposition–assisted internal polishing of AISI 304 steel, The International Journal of Advanced Manufacturing Technology, (2019) 104:3083–3094, Springer.
45. Raju Pawade, Avinash Khadtare, Dhanashree Dhumal and Vishal Wankhede, Machinability Assessment in High Speed Turning of High Strength Temperature Resistant Superalloys, Journal of Advanced Manufacturing Systems Vol. 18, No. 4 (2019) 595–623,World Scientific Publishing Company, DOI: 10.1142/S021968671950032X
46. Avinash Khadtare, Raju Pawade, Alwin Verghese, S S Joshi, Micro-drilling of Strait and Inclined holes on Thermal Barrier Coated Inconel 718 for Turbine Blade Cooling, Accepted for publication in Materials and Manufacturing Processes, 2020, VOL. 00, NO. 00, 1–14, Taylor and Francis.
47. Avinash N.Khadtare, Raju S.Pawade, Suhas S.Joshi, Surface integrity studies for straight and inclined hole in micro-drilling of thermal barrier coated Inconel 718: A turbine blade application, Precision Engineering, Elsevier, July 2020, 66(1), DOI:10.1016/j.precisioneng.2020.07.010
48. Ketan A. Jagtap, Raju S. Pawade, Experimental Investigation on Surface Roughness of Face Turned Co-Cr-Mo Biocompatible Alloy Followed by Polishing, Journal of Material Science and Surface Engineering, 2017, 5(4), 585-592.
49. Ketan A. Jagtap * and Raju S. Pawade, Monitoring of Surface Topography in CNC Turning of Co-Cr-Mo Biomaterial by using Acoustic Emission Signals, Surface Review and Letters, World Scientific and Company Publisher, Accepted For Publication
50. Kuldeep A. Mahajan, Raju Pawade, Effect of machining parameters and vibration on Polymethylmethacrylate (PMMA) curved surface in Single point diamond turning, Journal of Micromanufacturing, Sage Publications, 2020, Page 1-10, https://doi.org/10.1177/2516598420941728
51. Vinod Mishra , Rohit Sharma, Kuldeep Mahajan, Jayant Kumar, Neha Khatri, Aniket Gupta, Harry Garg, Vinod Karar, Raju Pawade and Ramagopal V. Sarepaka, Experimental investigations on ultraprecision machining of polycarbonate and related issues, Journal of Micromanufacturing, Sage Publications, 2020, Page 1-13, DOI: 10.1177/2516598420938495
52. Pawade Raju and Shinde Babasaheb, Study on Analysis of Kerf Width Variation in WEDM of Insulating Zirconia, MATERIALS AND MANUFACTURING PROCESSES, Taylor and Francis, 2020,
53. Pawade Raju and Shinde Babasaheb, Study on analysis of plasma resistance variation in WEDM of insulating zirconia, MATERIALS AND MANUFACTURING PROCESSES, Taylor and Francis, 2020, doi.org/10.1080/10426914.2020.1813898
54. Bhushan Nikam, Avinash Khadtare, Raju Pawade , Machinability Assessment Of AISI 4140 Hardened Steel using CBN Inserts in Hard Turning, International Journal of Modern Manufacturing Technologies, ISSN 2067–3604, Vol. XIII, No. 1 / 2021
55. Raju Pawade, Ganesh Dhurde, Wire EDM of Aerospace grade 17-4 PH Stainless Steel: Application of Evolutionary JAYA Algorithm, International Journal of Mechatronics and Manufacturing Systems, Inderscience Publisher, 2021 Vol.14 No.3/4, pp. 240-265, DOI: 10.1504/IJMMS.2021.121242 .
56. Kuldeep A. Mahajan, Raju Pawade, Vinod Mishra, Tool Vibration Effect on Surface Roughness of Polymethylmethacrylate in Diamond Turning, Materials and Manufacturing Processes, Taylor & Francis, pp. 1-13, DOI: 10.1080/10426914.2021.1973029.
57. Nikhil Khatekar, Raju Pawade, Mohd. Kashif, Umais Momin, ANN Modelling of Electrophoretic deposition assisted polishing process for prediction of Surface roughness in AISI 304 Steel, International Journal of Automotive and Mechanical Engineering (IJAME),
58. G.S. Kadam and R.S. Pawade, Comparative assessment of machining induced hardening in HSM of Inconel 718 with aid of ecofriendly cutting fluids, Materials Today: Proceedings, Elsevier, Online 25 April 2022, https://doi.org/10.1016/j.matpr.2022.04.342
59. Avinash N. Khadtare, Raju S. Pawade, Suhas S. Joshi, Experimental study in Micro-drilling Mechanism on Heterogeneous Structure of Thermal Barrier Coated Inconel 718 Superalloy, Submitted
National Journal -5
1. Amey Chaudhari, Raju Pawade and Sagar Sapkal, Surface integrity investigations in ball burnishing of 6063 Al alloy, Submitted to National Journal of Association of Engineers (Kolkata), Vol. 82, No. 3-4, July-December 2012, pp. 22-33.
2. Rupesh Bangar, Vallabh Sakhare, Aishwarya Mahagaokar, Gopal Chavan, Raju Pawade, Performance analysis in ball nose end milling of preheated HSTR Inconel 600 alloy, REASON- A Technical Magazine (ISSN 2277-1654) published by Kalyani Govt. Engineering College, Kolkata, Vol. XI, 2012, pp.13-20.
3. R.S. Pawade and S.B. Bhosale Grey Relational Parameter Optimization in Ultrasonic Machining of Ceramic Composite (AlO3/ZrO2), National Journal of Association of Engineers (Kolkata), Vol. 83, No. 2, April-June 2013, pp. 63-77
4. Bhushan Nikam, Avinash Khadtare, Raju Pawade, Machinability Assessment in Hard Turning of AISI 4140 Hardened Steel using CBN Inserts", Journal of The Institution of Engineers (India): Series C, Springer
5. Sagar N Sakharkar, Raju S Pawade, Prakash K Brahmankar, Model Development and Sustainability Assessment of Minimum Quantity Lubrication Technique in Turning of 700/3 Austempered Ductile Iron, Asian Journal of Convergence in Technology, VOL 2 (2016): ISSUE III, 2021
International Conferences/Symposium - 105
1 R. S. Pawade, B. F. Jogi, An Emerging need to develop industries thorough ERP, Proc. Of the International Conference on e-Manufacturing; An emerging need for 21st Century World Class Enterprises, BHEL and MANIT, Bhopal, 17-19 Nov. 2002.
2 R. S. Pawade, H. N. Warhatkar, B. F. Jogi, Factories of Future; IT Based Manufacturing, Proc. Of 20th AIMTDR Conference, BIT Mesra, Ranchi, 13-15 Dec. 2002.
3 R. S. Pawade, S. S. Joshi, M. Rahman, High-Speed Machining of Difficult-to-cut Materials: Superalloys-Inconel 718, Proc. Of the International Workshop on High Speed Machining of Hard Materials, National University of Singapore, 12-13 Nov. 2003.
4 Nilesh Kharche, Pawan Pawade, Vivek Gaikhe, R. S. Pawade, P. K. Brahmankar, AJM Characteristics of 6061/Al2O3 Metal Matrix Composites, Proc. Of 21st AIMTDR Conference, VIT, Vellore, 20-22 Dec. 2004.
5 R. S. Pawade, S. S. Joshi, P. K. Brahmankar, M. Rahman, Some Investigations on Surface Integrity of High Speed Turned Inconel 718, Proc. Of 21st AIMTDR Conference, VIT, Vellore, 20-22 Dec. 2004.
6 G. Y. Bhide, R. S. Pawade, P. K. Brahamnkar, N. P. Gulhane, Taguchi Analysis of Dimensional Variation in Grinding of Automotive Bevel Gear, Proc. Of ICPQR-2005, New Delhi.
7 R. S Pawade, D. K Kamble, S.S. Joshi, P. K. Brahmankar, Analysis of The Influence of EDM Parameters on MRR, Surface Roughness, TWR Of Inconel 718, Proc. Of ISME 2005, New Delhi, 12-14 December, 2005.
8 A. A. Karmarkar, S. B. Bhopi, R. S Pawade, P. K. Brahmankar, Surface Topography Investigations of High Speed Turned Titanium Alloy, Proc. Of COPEN 2005, 4th National Conference on Precision Engineering, Jadavpur University, Kolkata, Dec. 16-17, 2005.
9 C. M. Badole, R. S. Pawade, P. K. Brahmankar, Optimization of Tool Wear Parameters in High Speed Turning of Inconel 718, Proc. Of the International Conference on Global Manufacturing and Innovation (An Advanced Optimization Technology Approach) GMI 2006, CIT, Coimbatore, 27-29 July, 2006.
10 Harshad Sonawane, Rahul Nilangekar, Raju Pawade, Nitin Banait, Uday Dabade, Study of Influenece of Process Parameters of Surface Roughness in Ball Burnishing of (Al 6351) Alloy, Proc. Of the International Conference on Advances in Materials Processing and Characterization (AMPC 2006), Ed. L. Karunamoorthy et al., College of Engineering, Guindy, Chennai, 28-30 August 2006, pp.262-269.
11 K. Shambharkar, M. Madhvi, S. Kaskar, R. S. Pawade, H. S. Joshi, N. G. Patil, An Investigation of Surface Roughness in Grinding of Al-Al2O3 Metal Matrix Composites (MMCs), Proc. Of the International Conference on Advances in Materials Processing and Characterization (AMPC 2006), Ed. L. Karunamoorthy et al., College of Engineering, Guindy, Chennai, 28-30 August 2006, pp. 358-366.
12 R. S. Pawade, S. S. Joshi, P. K. Brahmankar, M. Rahman, An Investigation of Cutting Forces and Surface Damage in High-Speed Turning of Inconel 718, Proc. Of 7th International Conference on Materials Processing (ACMP) 4-6 Dec. 2006, NUS, Singapore, pp. 220-228.
13 P. K. Brahmankar, R. S. Pawade, N.G. Patil, An Investigation into Surface Finish in Grinding of Metal Matrix Composites (MMCs) Using Taguchi-Grey Relational Analysis, Proc. Of the International Conference on Materials Processing for Properties and Performance MP3 2006, Ed. K. A. Khor et al., Institute of Materials, East Asia, December 11-15, 2006, pp. 277-278.
14 G. Y. Bhide, R. S. Pawade, D. M. Patil, P. G. Khakse, Proc. Of the International Conference on Advances in Materials Processing and Characterization (AMPC 2006), Ed. L. Karunamoorthy et al., College of Engineering, Guindy, Chennai, 28-30 August 2006, pp. 1039-1046.
15 Amey Chaudhari, Deepak Karankal, Raju Pawade, Experimental Investigation on Abrasive Jet Deburring (AJD) of Al 6351 Aluminium Alloy, IJED Conference, JNTU, Hyderabad.
16 Harshdeep Joshi, R. P. Parvekar, R. S. Deshmukh, R. S. Pawade, Knowledge Driven Automation of CAD (Modeling) Procedures, Proc. Of 22nd AIMTDR Conference, IIT, Roorkee, 14-16 Dec. 2006.
17 Harshad Sonawane, Rahul Nilangekar, Raju Pawade, Harshdeep Joshi, Surface Characteristics of 6351 Al Alloy Using Costeffective Ball-Cum-Roller Burnishing Tool, Proc. of 22nd AIMTDR Conference, IIT, Roorkee, 14-16 Dec. 2006.
18 P. H. Parkale, R. S. Pawade, P. K. Brahmankar, A Study of Cutting Forces and Tool Flank Wear in Hot Machining of HRSA Inconel 718, Proc. Of the Global Conference on CPIE 2007, NIT, Jalandhar, March 22-24, 2007.
19 R. S Pawade, Suhas S. Joshi, P. K. Brahmankar and J. Ramkumar, Effect of Electrode Shape and Rotation on EDM performance of Inconel 718, Proc. Of International and INCCOM-6 Conference on Future Trends in Composite Materials and Processing, (Eds. Kar et al.,2007), Indin Institute of Technology, Kanpur, 12-14 December, 2007, pp. 966-972.
20 R. S Pawade, Suhas S. Joshi, P. K. Brahmankar, An Analysis of Machined Surface Topography in High-Speed Machining of Inconel 718, Proc. Of Fifth International Conference (COPEN 2007), College of Engineering, Trivendrum, December 13-14, 2007, pp.349-354.
21 D. P. Bhamare, P. K. Brahmankar, M. Sadaiah, R. S Pawade, Some Studies on Diamond Turning of OFHC Copper, Proc. Of Fifth International Conference (COPEN 2007), College of Engineering, Trivendrum, December 13-14, 2007, pp.193-196.
22 K. A. Jagtap, R. S Pawade, P. K. Brahmankar, R. Balasubramaniam, Surface Characterisation of Optical Polymers in Ultra Precision Machining, Proc. Of Fifth International Conference (COPEN 2007), College of Engineering, Trivendrum, December 13-14, 2007, pp.355-358.
23 K.A. Mahajan, M.Sadaiah, P.K.Brahmankar and R.S.Pawade, Effect of Tool Waviness on Component in Diamond Turning, Proc. Of Fifth International Conference (COPEN 2007), College of Engineering, Trivendrum, December 13-14, 2007, pp.189-192.
24 P. H. Parkale, R. S. Pawade, P. K. Brahmankar, A Study of Cutting Forces and Tool Flank Wear in Hot Machining of HRSA Inconel 718, Proc. Of the International Conference on Advances in Material Processing Technology, AMPT, Dyjon, Korea, 2007.
25 A. A. Chavan, R. S. Pawade, P. K. Brahmankar, Surface Topography Assessment in Turning of Ti-6Al-4V Alloy using Response Surface Method, Proc. Of the International Conference on Frontiers in Design and Manufacturing Engineering (ICDM-08), 2007, pp. 210-216.
26 A. A. Chavan, R. S. Pawade, P. K. Brahmankar, Process Parameter Optimization of Surface Roughness in CNC Turning of Polyetheretherketone (Peek), in Proc. 25th Annual Meeting of the Polymer Processing Society (PPS-25), March 1-5, 2009.
27 S. B. Bhosale, R. S. Pawade, P. K. Brahmankar, Surface Roughness Evaluation in CNC Turning of Polymer Nylon-6, in Proc. 25th Annual Meeting of the Polymer Processing Society (PPS-25), March 1-5, 2009.
28 Harshad Sonawane, Suhas S. Joshi, N. N. Bhopale, Raju S. Pawade, Analysis and Modeling of Cutting Forces in Ball End Milling of Superalloy Inconel 718, in Proc. International Conference on Advances in Mechanical Engineering, SVNIT, Surat, August 3-5, 2009.
29 Raju S. Pawade, D. S. N. Reddy, Ganesh S. Kadam, High-speed Turning of Titanium alloy (Ti-6Al-4V) using Water Vapour as a Coolant, International conference on Current Trends in Technology, NUiCONE 2010, Institute of Technology, Nirma University, Ahmedabad, 2010.
30 R. S. Pawade, Ashis Abhyankar, P. B. Brahmankar, Girish Joshi, Yogesh Gaikhe, Some Investigations on Electro-polishing of Stainless Steel 420, Second International Conference on Production and Industrial Engineering, CPIE 2010, 2010.
31 Shrikrusna Bhosale, R. S. Pawade, P. K. Brahmankar, Some Investigations into Ultrasonic Machining of Alumina Zirconia Ceramic Composite, 3rd International and 24th AIMTDR Conference, COE, Vizag, 2010.
32 R. S. Pawade, Mahesh Rayate, Prasad Ingale, Sameer Paritkar, Some Investigations into Electro-phorretic Polishing of 304 Stainless Steel, 3rd International and 24th AIMTDR Conference, COE, Vizag, 2010.
33 S. S. Bhadane, R. S. Pawade and B. F. Jogi, Taguchi Optimization of Surface Integrity Parameters in High Speed Machining of Titanium Alloy (Ti-6Al-4V), Proc. Of the 1st International Conference on Modern Trends in Industrial Engineering, November 17-19, 2011, S.V. National Institute of Technology, Surat – 395 007, Gujarat, India.
34 Ketan A. Jagtap and Raju S. Pawade, A Comparative Analysis of Surface Topography in Ultra Precision Machining of Optical Polymer, International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 7, College of Engineering Pune, Dec. 10-11, 2011.
35 Rajendra H. Pawar and Raju S. Pawade, Study of micro deformation layer characteristics in dry high speed machining of Ti-6Al-4V alloy, International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 7, College of Engineering Pune, Dec. 10-11, 2011.
36 Yogesh Gaikhe, Arvind Chavan, Raju Pawade, 3D Surface Characterization of Electrophoretic Deposition Assisted Polishing of SS316L, International Conference on Intelligent Manufacturing Systems, ICMS 2012, SASTRA UNIVERSITY (Shanmugha Arts Science Tech. and Research Academy) Thirumalaisamudram, Thanjavur – 613401Tamilnadu, India, Feb17-18, 2012.
37 Pramod Yadav, Sandip Babar, Pankaj Chitalkar, Sandeep Huddedar, Raju Pawade, Effect of Cooling Environment on Grinding Performance of Nickel Based Superalloy Inconel 718, International Conference on Intelligent Manufacturing Systems, ICMS 2012, SASTRA UNIVERSITY (Shanmugha Arts Science Tech. and Research Academy) Thirumalaisamudram, Thanjavur – 613401Tamilnadu, India, Feb17-18, 2012.
37. Ketan A. Jagtap and Raju S. Pawade, and R. Balasubramaniam, Some Investigations on surface characteristics in Precision Turning of Nylon and Polypropylene, Proceedings of International conference on Recent Trends in Engineering & Technology (ICRTET-2012) at K B Jain COE, Chandwad, Nashik , March 23-25, 2012.
38 R. H. Pawar, R. S. Pawade, Surface Integrity Analysis in Dry High Speed Turning of Titanium Alloy Ti-6Al-4V, Proc. Of International Conference on Trends in Industrial and Mechanical Engineering, Dubai, UAE, 24-25 March 2012
38. Nandkumar N. Bhopale, Raju S. Pawade, Effect of Cutting Environment on Surface Integrity in High-speed Ball End Milling of Inconel 718, Proceedings on 21st International Symposium on Processing and Fabrication of Advanced Materials (PFAM XXI), IIT Guwahati, 10-13 December, 2012, Eds. Robi et al, pp.1025-
39. Nandkumar N. Bhopale, Raju S. Pawade, Analysis of machined Surface Quality in High-speed Ball End Milling of Inconel 718, Proceedings of 4th International and 25th All India Manufacturing Technology, Design and Research Conference, AIMTDR, Jadavpur University, Kolkata, 14-16 December, 2012, Eds. B. Bhattacharya et al, pp.----
40. Nandkumar N. Bhopale, Raju S. Pawade, Investigation of Surface Integrity in High-sped Ball End Milling of Cantilever Shaped Thin Plate of Inconel 718, Proceedings on GCMM, 2012, AUT University, Aukland, 28-30 November 2012, Eds. Singanmeni, pp. 210-217
41. Ganesh Kadam, Raju Pawade, Analysis and Modelling of Surface Integrity of Inconel 718 machined using different Cooling Environment, Proceedings on International Conference on Innovations in Design and Manufacturing and International Design Workshop (InnDeM 2012) December 5 – 7, 2012, PDPM Indian Institute of Information Technology, Design & Manufacturing Jabalpur, pp.---
42. Ketan A. Jagtap and Raju S. Pawade, Effect of Machining Environment on Surface Integrity in Precision Turning of Co-Cr-Mo Bio-Implant Alloy, Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 8, NIT Calicut, Dec. 13-15, 2013, pp. 495-500.
43. Ganesh Kadam, Raju Pawade, Surface Topography Assessment in High-Speed Turning of Inconel 718 under Different Machining nvironments, International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 8, NIT Calicut, Dec. 13-15, 2013, pp. 367-374.
44. Nilesh Nikam, Swapnil Harel, Indrajit Powar, Rahul Konduskar, Nandkumar Bhopale and Raju Pawade, Surface Integrity Optimization of Ball End Milling of Inconel 718, International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 8, NIT Calicut, Dec. 13-15, 2013, pp. 404-410.
45. Abhishek Bhide, Maruti Nikam, Vilas Katare, Nikhil Khatekar, Raju Pawade and P.K. Brahmankar, Surface Quality Evaluation in Electrophoretic Deposition Assisted Polishing of AISI 304 Steel, Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 8, NIT Calicut, Dec. 13-15, 2013, pp. 829-833.
46. Haseen Shaikh, Aditi Shinde, Nitesh Pathode, Deven Dere, R.S. Pawade and P.K. Brahmankar, Performance Analysis of Powder Mixed EDM of Al-20% SiC Metal Matrix Composite, Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 8, NIT Calicut, Dec. 13-15, 2013.
47. Raju Pawade, Kiran More, Surface Delamination Analysis in End Milling of GFRP Composite, Proc. of International Conference on Design, Manufacturing and Mechatronics, ICDMM 2014, Trinity College of Engineering, Pune, 9-10 January 2014.
48. Karansagar Giradkar, Nikhil Khatekar, Raju Pawade, Multi attribute optimization in Ball End Milling of Inconel 600 using AHP and TOPSIS, Proc. of 3rd International Conference on Recent Trends in Engineering and Technology, ICRTET’ 2014, K B Jain College of Engineering Chandawad, Nashik, 28-30 March 2014, pp. 449-453.
49. Mitali S. Mhatre, Sagar U. Sapkal and Raju S. Pawade, Electro discharge machining characteristics of Ti-6Al-4V alloy: A grey relational optimization, Proc. of International Conference on Advances in Manufacturing and Materials Engineering, National Institute of Technology, Surathkal, Karnataka, 28-30 March 2014, pp. 1-9
50. Prasad Pawase, P.K. Brahmankar, R.S. Pawade, R. Balasubrahmanium, Analysis of Machining mechanism in Diamond turning of Germanium lenses, Proc. of International Conference on Advances in Manufacturing and Materials Engineering, National Institute of Technology, Surathkal, Karnataka, 28-30 March 2014, pp. 1-6
51. Nandkumar N. Bhopale, Raju S. Pawade, Surface Integrity Studies In Ball End Milling Of Thin Shaped Cantilever Inconel 718, Proceedings of the 8th ASME 2014 Manufacturing Science and Engineering Conference, June 09-13, 2013, Detroit, Michigan, USA, MSEC2014-4015, pp. 1-10
52. Babasaheb Shinde, Julfekar Arab, Lalitrao Amrutsagar, Raju Pawade, P.K.Brahmankar, Some Investigations into Powder Mixed Electric Discharge Machining of Metal Matrix Composite Al 6061/Al2O3/24P, ICMMM 2014 International Colloquium on Materials, Manufacturing and Metrology, Indian Institute of Technology, Madras, 8th – 9th August 2014.
53. Ganesh S. Kadam, Raju S. Pawade, Residual Stresses Analysis in High-speed Turning of Inconel 718 under Different Machining Environments, ICMMM 2014 International Colloquium on Materials, Manufacturing and Metrology, Indian Institute of Technology, Madras, 8th – 9th August 2014.
54. Sandesh Bhadane, Swamini Chopra, Mitali Mhatre, Raju Pawade, Effect of Water Vapour Coolant on the Surface Integrity of Turned Ti-6Al-4V alloy, ICMMM 2014 International Colloquium on Materials, Manufacturing and Metrology, Indian Institute of Technology, Madras, 8th–9th August 2014.
55. Sandeep Desai, Ajay Chavan, Raju Pawade, P. K. Brahmankar, Multiple Attribute Optimization of PEEK Polymer Turning using Grey Relational Analysis, International Conference on Advancement in Design and Manufacturing, ICADM 2014, NIT Trichy, 5-7 December 2014
56. Ramesh Guttedar, Amit Patil, Raju Pawade, Design and Development of Horn and Slurry Circulation System in Ultrasonic Machining’ Proceedings of International Conference on Newest Drift in Mechanical Engineering (ICNDME-2014), M. M. University, Mullana (Ambala)20th - 21th December 2014
57. Monika H. Salunkhe,Rashmi L. Lingapure, Sagar N. Sakharkar, Nikhil V. Khatekar, Raju S. Pawade, Electrophoretic Deposition Assisted Polishing of Internal Surfaceof AISI 304 Steel, Proc. of International Conference on Advances in Materials and Product Design (AMPD 2015), SV NIT, Surat, January 2015.
58. Karansagar Giradkar, Nikhil Khatekar, Raju Pawade, Multiattribute Optimization in Ball End Milling of Inconel 600 Using AHP and TOPSIS, Proc. of Third International Conference on Recent Trends in Engineering and Technology, ICRTET 2014, March 28-30 2014, SNJB, K B Jain COE, Chandwad, Nashik.
59. Ganesh Dhurde, P. K. Brahmankar, R. S. Pawade, R. Balasubramaniam, Some studies on Diamond Turning of Aluminium alloy 6061-T 651, Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 9, Indian Institute of Technology, Powai, Mumbai, Dec. 9-12, 2015, pp. .
60. Pankaj Sonawane, Raju S. Pawade, Suhas S. Joshi, Experimental analysis of Orthogonal Micromachined surface features of AISI 1215 steel by using EBSD method , Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 9, Indian Institute of Technology, Powai, Mumbai, Dec. 9-12, 2015, pp.
61.Sagar Sakharkar, Raju S. Pawade, P. K. Brahmankar, Nilesh Patil, Comparative machinability assessment in turning of Austempered Ductile Iron using MQL and Flood Environment, Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 9, Indian Institute of Technology, Powai, Mumbai, Dec. 9-12, 2015, pp.
62. Ketan Jagtap, Raju S. Pawade, On the influence of cutting forces in precision turning of Co-Cr-Mo Bio-implant alloy, Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 9, Indian Institute of Technology, Powai, Mumbai, Dec. 9-12, 2015, pp.
63. Shraddha Rangari, Madhuri Choudhari, Mahesh Chavan, Raju S. Pawade, Vilas Shinde, Assessment of surface topography in Electro-phoretic Deposition assisted polishing of internal bore of AISI 304 steel , Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 9, Indian Institute of Technology, Powai, Mumbai, Dec. 9-12, 2015, pp.
64. Sandeep Desai, Raju S. Pawade, Hemant Warhatakar, Experimental investigation in face milling of Mg-Ca 1 Biodegradable Alloy, Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 9, Indian Institute of Technology, Powai, Mumbai, Dec. 9-12, 2015, pp.
65.Kiran More, Raju Pawade, Nilesh Nikam, Experimental investigation for improving Robotic Roller Hemming Process, Proc. of First International Conference on Productivity, Efficiency and Competitiveness in Design and Manufacturing, 7-9 January 2016.
66. Kiran More, Raju Pawade, Some studies to optimize and improve the Robotic Roller Hemming process, Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 9, Indian Institute of Technology, Powai, Mumbai, Dec. 9-12, 2015, pp.
67.Haseen sheikh, Raju Pawade, P. K. Brahmankar, Some Investigations in Single Point Diamond Turning of Germanium Aspheric Lens, Proc. of International Conference on Advances in Mechanical and Material Sciences - 2016, San Diego, USA, 27-28 August 2016.
68. Suraj Patil, Amit Jadhav, Amit Dalvi and Raju Pawade, Experimental Analysis of Macro Features Generated by Reverse EDM, Proc. of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) 16th–18th December, 2016, College of Engineering Pune, pp. 209-213
69. Kiran More, Raju Pawade and Nilesh Nikam, Experimental Analysis of Robotic Roller Hemming Process for Improving Performance, Proc. of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) 16th–18th December, 2016, College of Engineering Pune, pp. 242-246
70. V.A. Mali, H.N. Warhatkar and R.S. Pawade, Assessment of Cutting Forces and Temperature in Bone Drilling, Proc. of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) 16th–18th December, 2016, College of Engineering Pune, pp. 476-480
71. Bhushan Nikam, Sandip Desai, Raju Pawade and P.K. Brahmankar, Acoustic Emission Characterization of Mg-Ca1.0 Alloy in Face Milling, Proc. of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) 16th–18th December, 2016, College of Engineering Pune, pp. 481-485
72. Prasad Pawase, Jyotsna Bhole, Raju Pawade and P.K. Brahmankar, Experimental Investigation in Diamond Turning of Germanium Aspheric Lens, Proc. of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) 16th–18th December, 2016, College of Engineering Pune, pp. 573-577.
73. Ganesh S. Kadam, Raju S. Pawade and Amit M. Patil, Cleaner Machining of Inconel 718 with Water Vapour as an Eco-friendly Cutting Fluid, Proc. of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) 16th–18th December, 2016, College of Engineering Pune, pp. 634-638.
74. Sandeep Desai, Raju Pawade and Hemant Warhatkar, Experimental Investigation of Orthopedic Biodegradable Mg-Ca1.0 Alloy by Dry Face Milling, Proc. of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) 16th–18th December, 2016, College of Engineering Pune, pp. 1136-1140.
75. Badal Pandharkar, Abhijeet Salunke, Shivprasad Mawal and Raju Pawade, Analysis of Surface Quality and Dimensional Accuracy in Cylindrical Grinding of EN24 Steel, Proc. of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) 16th–18th December, 2016, College of Engineering Pune, pp. 1215-1218.
76. J.M. Arab, P. Dixit, P.K. Brahmankar, R.S. Pawade and A.K. Srivastava, Micro-fabrication of Faraday Cup Array Structures in Silicon using DRIE, Proc. of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) 16th–18th December, 2016, College of Engineering Pune, pp. 1594-1597.
77. R.S. Pawade A.S. Awale and P.K. Brahmankar, Application of Jaya Algorithm in Optimization of High Speed Turning of AISI S7 Tool Steel, Proc. of 6th International & 27th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2016) 16th–18th December, 2016, College of Engineering Pune, pp. 1764-1768.
78. Babasaheb Shinde, Raju Pawade, International Conference on Design and Manufacturing, ICONDM, IIITDM, Kanchipuram, Chennai, 16-17 December 2016.
79. Shivam Yadav, Rahul Waikar, Raju Pawade, Suhas Joshi, Experimental analysis of orthogonal micro-machined surface features and chip morphology of AISI1215 steel by using EBSD method, Proc. of ICCASP/ICMMD-2016, Advances in Intelligent Systems Research, 20-21 December 2016, Vol. 137, Pp. 304-310, © 2017 Springer Atlantis Press, B. Iyer, S. Nalbalwar and R. Pawade (Eds.), ISBN: 978-94-6252-305-0 doi:10.2991/iccasp-16.2017.48
80.Bhushan Nikam, Shivprasad Mawal, Raju Pawade, Macro Scale Arrayed Structure Fabrication Using Reverse EDM, Proc. of ICCASP/ICMMD-2016, Advances in Intelligent Systems Research, 20-21 December 2016, Vol. 137, Pp. 200-205, © 2017 Springer Atlantis Press, B. Iyer, S. Nalbalwar and R. Pawade (Eds.), ISBN: 978-94-6252-305-0 doi:10.2991/iccasp-16.2017.33
81. Ganesh Kadam, Raju Pawade, Influence of Machining Environment on Surface Integrity in HSM of Inconel 718 With Productivity Perspective, Proc. of ICCASP/ICMMD-2016, Advances in Intelligent Systems Research, 20-21 December 2016, Vol. 137, Pp. 89-93, © 2017 Springer Atlantis Press, B. Iyer, S. Nalbalwar and R. Pawade (Eds.), ISBN: 978-94-6252-305-0 doi:10.2991/iccasp-16.2017.15
82. Sandeep Desai, Raju Pawade, Influence of Manufacturing Parameters on Performance of Biodegradable Mg-Ca1.0 Implant, Proc. of ICCASP/ICMMD-2016, Advances in Intelligent Systems Research, 20-21 December 2016, Vol. 137, Pp.252-258, © 2017 Springer Atlantis Press, B. Iyer, S. Nalbalwar and R. Pawade (Eds.), ISBN: 978-94-6252-305-0 doi:10.2991/iccasp-16.2017.40
83. O. Bhatkar, S. Sakharkar, V. Mohan, R. Pawade, Residual Stress Analysis in Orthogonal Cutting of AISI 1020 Steel, Proc. of ICCASP/ICMMD-2016, Advances in Intelligent Systems Research, 20-21 December 2016, Vol. 137, Pp. 100-106, © 2017 Springer Atlantis Press, B. Iyer, S. Nalbalwar and R. Pawade (Eds.), ISBN: 978-94-6252-305-0 doi:10.2991/iccasp-16.2017.17
84. R. Shinde,N. Patil, D.Raut, R. Pawade, P. Brahmankar, Experimental Investigations into Powder-Mixed Electrical Discharge Machining (PMEDM) of HCHCr D2 Die Steel, Proc. of ICCASP/ICMMD-2016, Advances in Intelligent Systems Research, 20-21 December 2016, Vol. 137, Pp. 298-303, © 2017 Springer Atlantis Press, B. Iyer, S. Nalbalwar and R. Pawade (Eds.), ISBN: 978-94-6252-305-0 doi:10.2991/iccasp-16.2017.47
85. V. Baisane, N. Patil, S. Lahane, R. Pawade, P. Brahmankar, Investigations into Wire Electro-Discharge Machining of A6061/Al2O3 p Composites, Proc. of ICCASP/ICMMD-2016, Advances in Intelligent Systems Research, 20-21 December 2016, Vol. 137, Pp. 94-99, © 2017 Springer Atlantis Press, B. Iyer, S. Nalbalwar and R. Pawade (Eds.), ISBN: 978-94-6252-305-0 doi:10.2991/iccasp-16.2017.16
86. K. Jagtap, R. Pawade, A Comparative Analysis of Cutting Forces in Precision Turning of Co-Cr-Mo Bio-implant Alloy in Dry and Wet Machining Environments, Proc. of ICCASP/ICMMD-2016, Advances in Intelligent Systems Research, 20-21 December 2016, Vol. 137, Pp. 234-241, © 2017 Springer Atlantis Press, B. Iyer, S. Nalbalwar and R. Pawade (Eds.), ISBN: 978-94-6252-305-0 doi:10.2991/iccasp-16.2017.38
87. K. A. Jagtap, V. S. Narkhede, S. R. Wankhede, R. S. Pawade, Some Investigations on Cutting Forces in Face Milling of Mg-Ca1.0 Alloy, in Proc. International Conference on Manufacturing Excellence 3 & 4 March 2017, KK Wagh COE, Nashik.
88. Pranita Wagh, Sandeep Desai, Raju Pawade, Hemant Warhatkar, Analysis of Surface Roughness and Microhardness of Magnesium Bioimplant Alloy in Face Milling, in Proc. International Conference on Manufacturing Excellence 3 & 4 March 2017, , KK Wagh COE, Nashik.
89. Ganesh Kadam, Raju S. Pawade, Mechanics of CLF through Chip Deformation in Eco Friendly Machining of Inconel 718, International Conference on Current Trends in Technology - NUICONE 2017, Nirma University Ahmadabad, 23-25 November 2017
90. Ganesh Kadam, Raju S. Pawade, Completely Neat Eco Friendly HSM of Inconel 718, COPEN 10- 2017, IIT Madras-Chennai, 7-9 December 2017.
91. Shruti Banait, A N Jinoop, C P Paul, H Kumar, R. S. Pawade, K S Bindra, Investigating Laser Additive Manufacturing of Functionally Graded Ni-Cr-B-Si and SS 316 L, International Conference on Advances in Thermal system, Materials, and Design Engineering (ATSDME-2017), 21-22 December 2017, VJTI, Mumbai.
92. Ganesh S. Kadam, Raju S. Pawade, Chip Deformation Aspects in Relative Eco-friendly HSM of Inconel 718, Second International Conference on Materials, Manufacturing and Design Engineering (iCMMD-2017), MIT, Aurangabad, 11-12 December 2017.
93. Madhuri Chaudhari, Amey Pawade, Bhagwan F. Jogi, R. S. Pawade, Comparative study of part characteristics built using Additive Manufacturing (FDM), Second International Conference on Materials, Manufacturing and Design Engineering (iCMMD-2017), MIT, Aurangabad, 11-12 December 2017.
94. Bhushan Nikam, Babasaheb Shinde, Akash Pandey, Raju Pawade, Prakash Brahmankar, Pradeep Jadhav, Fabrication of Macro-Arrayed structure using Reverse EDM: A Multi-objective Optimization, Second International Conference on Materials, Manufacturing and Design Engineering (iCMMD-2017), MIT, Aurangabad, 11-12 December 2017.
95. Ketan A. Jagtap, Raju S. Pawade, Some studies on chip formation mechanism in CNC turning of Biocompatible C0-Cr-M0 Alloy, Second International Conference on Materials, Manufacturing and Design Engineering (iCMMD-2017), MIT, Aurangabad, 11-12 December 2017.
96. Yadav S, Shaikh H, Pawade R. “Assessment of Optical Performance of Aspheric Germanium Lens Manufactured Using Single Point Diamond Turning”. ASME. International Manufacturing Science and Engineering Conference, Volume 1: Processes ():V001T02A010. doi:10.1115/MSEC2017-2691.
97. Varsha Gaikhe, Raju Pawade, Parameter optimization in Ball end milling of Inconel 718 using GA, Proceedia CIRP, July 2018, Budapest, Hungery
98. Raju S. Pawade and Pankaj Mohire, Experimental Evaluation of Surface Roughness, Dimensional Accuracy and MRR in Cylindrical Grinding of EN 24 Steel, Proc. of 7th International & 28th All India Manufacturing Technology, Design and Research Conference (AIMTDR 2018) 13th–15th December, 2018, College of Engineering, Guindy, Anna University, Chennai, pp. -------.
99. Ganesh Dhurde, Raju Pawade, P. K. Brahmankar, Some Investigations into Wire Electro-Discharge Machining of 17-4 PH Stainless Steel Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 11, Indian Institute of Technology, Indore, Dec. 12-14, 2019, pp.
100. Ganesh S. Kadam1, Raju S. Pawade, Analysis of surface roughness in HSM of Inconel 718 using water vapour as green cutting fluid, Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 11, Indian Institute of Technology, Indore, Dec. 12-14, 2019, pp.
101.Raju Pawade, Bhushan Nikam1Nishad Ghode1, Pranit Jadhav, Siddhi Bhosale, Akshay Jagtap, Machinability Assessment of AISI 52100 Alloy Steel in Turning using Water Vapour as a Coolant, Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 11, Indian Institute of Technology, Indore, Dec. 12-14, 2019, pp.
102. Avinash Khadtare, Raju Pawade, Suhas Joshi, Investigation of Micro-Holes Characteristic for Straight and Inclined drilling in Thermal Barrier Coated Inconel 718 Superalloy, Proc. of International Conference on Precision, Meso, Micro and Nano Engineering, COPEN 11, Indian Institute of Technology, Indore, Dec. 12-14, 2019, pp. 103.
103. Ganesh S. Kadam, Raju S. Pawade, Cutting Force assessment in HSM of Inconel 718 aided with Water Vapour as an Eco-friendly Cutting Fluid, in proc. International Conference in "Recent Advances in Manufacturing (RAM - 2021)" June 10-12, 2021 S. V. National Institute of Technology, Surat, India.
104. Avinash N. Khadtare, Raju S. Pawade, Suhas S. Joshi, ANALYSIS OF DRILLING THRUST FOR STRAIGHT AND INCLINED MICRO-HOLE IN THERMAL BARRIER COATED INCONEL 718 SUPERALLOY, Proceedings of the ASME 2021 International Mechanical Engineering Congress and Exposition, IMECE2021, November 1-5, 2021, Virtual, Online
105. Ganesh Kadam, Raju Pawade, Parametric evaluation in context to functional role of Eco-friendly Water Vapour Cutting Fluid through Chip Deformation analysis in HSM of Inconel 718, In proceedings of International conference CAMMP 2021, Malaviya National Institute of Technology, Jaipur, Rajasthan, India , 24-25, July 2021, Accepted.
106. Ketan A. Jagtap, Raju S. Pawade, Effect of Machining Parameters on Machined Flatness for Optical PMMA by Single Point Diamond Turning (SPDT), 7th International Conference on Recent Trends in Engineering & Technology (ICRTET- 2021, SNJB KB CoE, Chandwad, MS, 15-16 November 2021, Virtual.
National Conferences - 33
1 R. S. Pawade, R. P. Kate, Academic Programmes in Dr. Babasaheb Ambedkar technological University: An approach to TQM in Technical Education, Proc. Of National Seminar on TQM in Technical Education, TKIET, Warananagar, Kolhapur.
2 R. S. Pawade, H. N. Warhatkar, An innovatrive software for designing of spur and helical gears using IS 4460 standards, Proc. of National conference on World Class Manufacturing systems (NCMS-2000), B. I. E. T. Jhansi (UP), 18-19 August, 2000.
3 R. S. Pawade, B. F. Jogi, Octahedral Hexapod Machine-Revolutionary Machine Tool for the Flexible Manufacturing Systems, Proc. Of National conference on World Class Manufacturing systems (NCMS-2000), B. I. E. T. Jhansi (UP), 18-19 August, 2000.
4 R. S. Pawade, B. F. Jogi, innovatrive software for designing of spur and helical gears using IS 4460 standards, Proc. Of National Workshop on Industrial Automation and Applications (EPROMM-2000) PCEA, Nagpur, 19-20 January, 2001.
5 R. S. Pawade, H. N. Warhatkar, Octahedral Hexapod Machine-Revolutionary Machine Tool for the Flexible Manufacturing Systems, Proc. of National Workshop on Industrial Automation and Applications (EPROMM-2000) PCEA, Nagpur, 19-20 January, 2001.
6 R. S. Pawade, H. N. Warhatkar, V. R. Dhaygude, Heterarchical FMS: An alternative approach, Proc. of National conference on Production Engineers, MACT, Bhopal, 17-19 Nov. 2001.
7 B. F. Jogi, V. G. Sargade, R. S. Pawade, An Emerging Need to Develop Industries through ERP, IC@M, 2002
8 R. S. Pawade, B. F. Jogi, Six Sigma: A Dynamic Management Tool to Control the Quality of Processes, Proc. Of National Conference on Quality Engineering and Management (NCQE-2003) by QFCI, Kumarguru College of Technology, Cimbatore and Coimbatore Management Association, TN, 4-6 Jan. 2003.
9 R. S. Pawade, M. Sadaiah, P. Meshram, An overview of Recent Trends in Coordinate Measurement Machines (CMMs), Proc. Of the National Conference on Automation in Manufacturing (NCIOM-2003), Raisoni College of Engineering, Nagpur, 8-9 March, 2003.
10 C. M. Badole, R. S. Pawade, An overview of High Speed Machining, Proc. Of the National Conference on Advanced Manufacturing and Robotics, CMERI, Durgapur, 10-11Jan. 2004.
11 Mahesh Chakradeo, R. S. Pawade, Reconfigurable Manufacturing Systems (RMCs); A Present Status, Proc. Of the National Conference on Advanced Manufacturing and Robotics, CMERI, Durgapur, 10-11Jan. 2004.
12 P. H. Parkale, R. S. Pawade, Hot Machining Techniques to improve Tool Life: A review, Proc. Of the National Conference on Emerging Trends in Concurrent Engineering (ETCE-2005), NIT, Rourkela, 15-16 Jan. 2005.
13 R. S. Pawade, Durgesh Mandwale, A review of Laser Assisted Machining of Silicon Nitride (Si3N4) Ceramics, Proc. Of the National Conference on Emerging Trends in Mechanical Engineering, ETME-2005, NIT, Kurukshetra, 29-31 March, 2005.
14 Sushil Khatate, R. S. Pawade, D. D. Choudhary, Condition Monitoring using Vibration Signature Analysis; A Precision Maintenance Tool, Proc. Of the National Conference on Advances in Engineering Design (AED 2005), BAIT, Sathyamangalam, Coimbatore, TN, Eds. I. Rajendran, K. Balmurugan, 29-30 April, 2005.
15 R. S. Pawade, Nitin Banait, Surface Roughness Analysis in Surface Grinding of Inconel 601 using Design of Experiments, Proc. of CONQUEST-2006, Hyderabad, 15-17 January, 2006.
16 G. Y. Bhide, R. S. Pawade, Statistical process control of Dimensional accuracy applied to internal grinding of bevel gears, Proc. Of the National Conference – ‘AAQMENT-2006’, Erode, 23-24 February, 2006.
17 Ajaj Sain, Nikhil Paranjape, Raju Pawade, Minimal Quantity Lubrication (MQL): Approach Towards Green Machining, Proc. Of the National Seminar on Eco-Friendly Technologies and Challenges for Mechanical Engineers, SGSITS, Indore, 27-28 January, 2006.
18 Raju S. Pawade, Amey S. Choudhari, Sagar U. Sapkal, Harshdeep S. Joshi, Surface Integrity Investigations in Ball Burnishing of 6063 Al Alloy, Proc. Of National Conference on Trends in Computer Aided Design and Engineering TACADE 2007, Kalyani College of Engineering, Kalyani, WB, February 16-17, 2007, pp.
19 R. S. Pawade, D. S. N. Reddy, P. K. Brahmankar, Grey Relational Parameter Optimization in Ball Burnishing of 6063 Al alloy, Proc. Of National Conference on Trends in Advanced Manufacturing, Fr. Conceicao Rodrigues College of Engineering, Mumbai, October 19-20,2007, pp. 20-24.
20 D. S. Mankar, R. S. Pawade, Effect of Surface Roughness on Fatigue Life of Machined Component of Inconel 718, Accepted for presentation in National Conference on Advances in Mechanical Engineering, MIT, Aurangabad, 1-3 March, 2009.
21 C. M. Badole, R. S. Pawade, Behaviour of CVD PVD Coated Carbide Tools in High Speed Turning of Inconel 718, Proc. Of the National Conference on World Class Manufacturing (WCM 2009), Amrutvahini College of Engineering Sangamner, 26-27 February, 2009.
22 Madan Kulkarni, Raju S. Pawade, Bhagawan F. Jogi, High speed machining of titanium alloy (ti-6al-4v) with coated carbide tool, Proceedings of TFMS 2012 National Conference on Thermal, Fluid and Manufacturing Science January 20 – 21, 2012, Surat, Gujarat, India
23 Nitesh E. Chaudhari, Aniket A. Shetye and Raju S. Pawade, Bio-chemical Micro machining: A Review, Proceedings of National Conference on Advances in Chemical and Mechanical Engineering, NCACME-2012, January 27-28, 2012, Gharada Institute of Technology, Khed.
24 Ketan Jagtap, Raju Pawade, Diamond Turning of Optical Polymers, Proceeding Of National Conference on “Innovations In Mechanical Engineering” at Sinhgad Institute Of Technology, Lonavala, Pune, Maharashtra. 410 401, April 19-20 2012
25 Swamini Chopra, Sandeep Desai, Hemant warhatkar, Raju Pawade, Energy Considerations in Metal Machining, Proceedings of ENACT 2014- Energy : Needs and Current Trends- 2014, Dr. B. A. Tech. University, Lonere, 19-20 December 2014
26 Kalpana Jogdand, Kiran More, Ganesh Dhurde and Raju Pawade, Determination of Specific Cutting Energy in Hot Machining of Inconel 718, Proceedings of ENACT 2014- Energy : Needs and Current Trends- 2014, Dr. B. A. Tech. University, Lonere, 19-20 December 2014
27 Sagar N. Sakharkar, Ganesh S. Kadam, Raju S. Pawade, Prakash K. Brahmankar, Sustainability Assessment to Minimise Energy Consumption in Green Machining, Proceedings of ENACT 2014- Energy : Needs and Current Trends- 2014, Dr. B. A. Tech. University, Lonere, 19-20 December 2014
28 Prasad Pawase, P.K. Brahmankar, R.S. Pawade, Multi Objective Optimization of Surface Roughness and Slope Error in Diamond Turning of Germanium Lense using Taguchi Grey Relational Analysis, Proceedings of National Conference on Statistical Analysis and Computing in Engineering and Management, NC-SACEM, 2014, DY Patil COE, Akurdi, Pune, August 7-8 2014.
29 Nandakumar Nagothkar, Shivprasad Mawal, Raju Pawade, Multi Attribute Decision Making In Electro-Discharge Machining of SKD11 Steel Using Saw Optimization Method, National Conference on Recent Trends in Mechanical Engineering (NCRTME2016), 4-5 July 2016, WCE, Sangli, India
30 Bhole Jyotsna, Gharat Umesh, Nikam Manoj, Yewale Nilesh, Pawade Raju, Multi-Objective Optimization In End Milling of GFRP Composite Using Weighing Product Method (WPM), National Conference on Recent Trends in Mechanical Engineering (NCRTME2016), 4-5 July 2016, WCE, Sangli, India
31 Vishal B. Potadar, RanjeetKadam, Ganesh S.Kadam, Raju S.Pawade, Determination of Specific Cutting Energy In Green Machining of Inconel 718, National Conference on Recent Trends in Mechanical Engineering (NCRTME2016), 4-5 July 2016, WCE, Sangli, India
32 Abhishek Patil, Bhushan Nikam, Abhishek Ghanghav, Raju Pawade, Optimization of Process Parameters in Drilling of Al 6061/SiC Composite Using SAW Method, National Conference on Recent Trends in Mechanical Engineering (NCRTME2016), 4-5 July 2016, WCE, Sangli, India.
33. Raju Pawade, Nikhil Khatekar, Rohit Wakade, Application of Evolutionary Teaching-Learning based Optimization (TLBO) in Wire Electro discharge Turning, 4th National Conference on Multidisciplinary Design, Analysis and Optimization (NCMDAO), to be held virtually on October 7-9, 2021, IIT Chennai, Accepted.