Journal Papers
Chakraborty, M., Barman, M. (corresponding author), Asante, C., Hemmila, M. “Enhancing Aggregate Gradation of Base Layers to Mitigate Transverse Crack Tenting in Asphalt Pavements of Wet-Freeze Regions,” Journal of the Transportation Research Board, Transportation Research Board of the National Academies, 2025. In Review.
Zanko, L. (corresponding author), Barman, M., Turos, M., Marasteanu, M., Aro, “Taconite Aggregate as an Enhanced Friction Surface Treatment (EFST) Alternative,” Journal of the Transportation Research Board, Transportation Research Board of the National Academies, 2025. In Review.
Sharma, P. and Barman, M. (corresponding author). “Influence of Joint Stiffness on Stress Response and Deflection Behavior in Thin FRC Pavements,” Journal of the Transportation Research Board, Transportation Research Board of the National Academies, 2025. In Review.
Barman, M. (corresponding author), Sharma, P.*, Sabu, R.* and Burnham, T. “Seasonal Changes in the Joint Performance of Thin FRC Concrete Pavements and Overlays in Wet-Freeze Climate,” Journal of the Transportation Research Board, Transportation Research Board of the National Academies, 2024. In Press.
Roy, S., Barman, M. Joint Performance and Environmental Load-Induced Structural Responses of Thin Fiber-Reinforced Concrete Pavements. Int. J. Pavement Res. Technol. (2025). https://doi.org/10.1007/s42947-025-00522-7
Yan, T., Turos, M., Marasteanu, M., Manikavasagan, V., Barman, M., & Garrity, J. (2024). Experimental study and cost–benefit analysis of using polymer-modified binders for low-traffic roads in Minnesota. Road Materials and Pavement Design, 1–15. https://doi.org/10.1080/14680629.2024.2440013
Barman, M. (corresponding author), Roy, S., Tiwari, A., Burnham, T. “Joint Performance and Faulting of Ultra-thin and Thin Fiber Reinforced Concrete Pavements,” International Journal of Pavement Engineering, 2022. DOI: 10.1080/10298436.2022.2095562
Barman, M. (corresponding author), Hansen, B. “Post-Crack Flexural and Joint Performance Behaviors of Fiber Reinforced Concrete for Thin Pavement Overlays,” Journal of the Transportation Research Board, Transportation Research Board of the National Academies, 2021. In Press.
Munch, J., Arepalli, U. M., and Barman, M. (corresponding author). “Decision Trees for Selecting Asphalt Pavement Crack Sealing Method,” Journal of the Transportation Research Board, Transportation Research Board of the National Academies, 2020. doi:10.1177/0361198120960135.
Barman, M., Hansen, B. Burnham, T., and Masten M. (2020). “Choose Wisely: Structural fiber choice for thin concrete pavements can have a significant impact on quality,” Roads & Bridges, January 2020 Issue, 40-45.
Hansen, B., Barman, M. (corresponding author), “New Method to Evaluate the Post-Crack Performance of Fiber Reinforced Concrete,” Journal of the Transportation Research Board, Transportation Research Board of the National Academies, Vol. 2673, Issue 11, 2019. DOI: 10.1177/0361198119848408, pp 573–582.
Barman, M., Vandenbossche, J. M., and Janssen, D. “Small-Scale Joint Performance Test for Concrete Pavements,” ACI Structural and Materials Journals, American Concrete Institute, Vol. 116, Issue 6,2019, pp 109-119.
Imran, A., Barman, M., Commuri, S., Zaman, M., and Nazari, M. “Artificial Neural Network–Based Intelligent Compaction Analyzer for Real-Time Estimation of Subgrade Quality,” International Journal of Geomechanics, ASCE, ISSN (print): 1532-3641 | ISSN (online): 1943-5622, Vol. 18, 2018.
Barman, M. (corresponding author), Ghabchi, R., Singh, D., Zaman, M., Commuri, S. “An Alternative Analysis of Indirect Tensile Test Results for Evaluating Fatigue Characteristics of Asphalt Mixes,” Journal of Construction and Building Materials, 166:204-213 DOI10.1016/j.conbuildmat.2018.01.049, Elsevier, 2018.
Barman, M., Vandenbossche, J. M., and Li, Z. "Influence of Interface Bond on the Performance of Bonded Concrete Overlays on Asphalt Pavements," Journal of Journal of Transportation Engineering, Part B: Pavements, ASCE, 143(3): 040170082017, 2017. pp. 1-8.
Barman, M. (corresponding author), Nazari, M., Imran, S.A., Commuri, S., Zaman, M., Beainy, F., and Singh, D.V. “Quality Control of Subgrade Soil Using Intelligent Compaction,”Journal of Innovative Infrastructure Solutions, Springer, 1:23, 2016. Published online.
Imran, S.A., Commuri, S., Barman, M., Zaman, M., and Beainy, F., “Modelling the Dynamics ofAsphalt-Roller Interaction during Compaction,” Journal of Construction Engineering and Management, ASCE, 2017. DOI: 10.1061/(ASCE)CO.1943-7862.0001293.
Ghabchi, R., Barman, M., Singh, D., Zaman, M., Mubaraki, M. L. “Comparison of Laboratory Performance ofAsphalt Mixes Containing Different Proportions of RAP and RAS,” Journal of Construction and Building Materials, Elsevier, 124, 2016. pp. 343–351.
Barman, M. (corresponding author), Nazari, M., Imran, S.A., Commuri, S., Zaman, M."Quality Improvement of Subgrade Unisng Intelligent Compaction," Transportation Research Record: Journal of the Transportation Research Board, Transportation Research Board of the National Academies, No. 2579, Vol. 2. Washington, DC, 2016. pp. 59-69.
Sachs, G. S., Vandenbossche, J. M., Li, Z., and Barman, M. “Accounting for Temperature Susceptibility ofAsphalt Stiffness when Designing Bonded Concrete Overlays of Asphalt (BCOA)Pavements,” Journal of Transportation Engineering, ASCE,10.1061/(ASCE)TE. 1943-5436.0000861, 2016.
Imran, S.A., Barman, M. (corresponding author), Nazari, M., Commuri, S., Zaman, M. “ContinuousMonitoring of Subgrade Stiffness during Compaction,” Transportation Research Procedia, Elsevier, Vol. 17, 2016, pp 617-625.
Barman, M., Vandenbossche, J. M., Pandey, B. B. and Singh, D. V. “Current Design Concepts for Bonded Concrete Overlays of Asphalt Pavements,” Journal of Indian Road Congress, India, 2015. In Review.
Barman, M., Vandenbossche, J. M. and Li, Z. “Characterization of Load Transfer Behavior for Bonded Concrete Overlays of Asphalt,” Transportation Research Record: Journal of the Transportation Research Board, No. 2524, Vol. 2, Transportation Research Board of the National Academies, Washington, DC, 2015, pp. 143-151.
Vandenbossche, J. M., Barman, M. and Nolan-Kremm, J. “Using Surface Texture Measurements of Crack Surface to Establish a Joint Spring Stiffness Representing the Shear Transfer Capacity,” Transportation Research Record: Journal of the Transportation Research Board, No. 2441, Transportation Research Board of the National Academies, Washington, DC, 2014, pp. 13-19.
Barman, M., Ghabchi, R., Singh, D. V., Zaman, M., Commuri, S., and Hobson, K. “Evaluation of fatigue performance of asphalt mixes using Semi-Circular Bend and Four Point Beam Fatigue test methods,” Computer Methods and Recent Advances in Geomechanics, Taylor and Francis Group, London, 2014, pp. 459- 464.
Vandenbossche, J. M. and Barman, M. “Bonded Whitetopping Overlay Design Considerations for Prevention of Reflection Cracking, Joint Sealing, and the use of Dowel Bars,” Transportation Research Record: Journal of the Transportation Research Board, No. 1809, Transportation Research Board of the National Academies, Washington, DC, 2010, pp. 3-11.
Pal, M., Majumder, K., Barman M., and Sarkar, D. “Study of Strength, CBR, Resistivity and Conductivity of Soil-Jute mixture,” August, 2010, Indian Highways, IRC, Vol. 38, pp. 53-62.
Barman, M. and Pandey, B. B. “Backcalculation of Layer Moduli of Concrete Pavement by Falling Weight Deflectometer,” Journal of the Indian Road Congress, IRC, Vol. 69, Part-3, New Delhi, India, 2009, pp. 205-211.
Barman, M. and Pandey, B. B. “A Simple Algorithm for Evaluation Rural Road using Falling Weight Deflectometer,” Highway Research Bulletin, Indian Road Congress, IRC, Vol. 75, New Delhi, 2006, pp. 69-75.
Conference Papers
Sharma, P., and Barman, M. (corresponding author), “Joint Performance Modelling of Thin Fiber Reinforced Concrete Pavement” 102nd Annual Meeting, Transportation Research Board of the National Academies, Jan 8-12, 2023. DC.
Barman, M. (corresponding author), Roy, S., and Burnham, T. R., “Performance of Thin Fiber Reinforced Concrete Overlay Test Sections” 101st Annual Meeting, Transportation Research Board of the National Academies, Jan 9-13, 2022. DC.
Dhasmana, H., Irankunda, G., Barman, M. (corresponding author), and Ulring, J., “Impact of Asphalt Layer Densification on Low-Temperature Performance of Low Volume Roads” 101st Annual Meeting, Transportation Research Board of the National Academies, Jan 9-13, 2022. DC.
Barman, M. (corresponding author), Crick C., and Burnham, T. R., “Behavior of Ultra-thin and Thin Fiber-Reinforced Pavements on Granular Base,” Proceedings of 12th International Conference on Concrete Pavements, ISCP, September 27- October 1, 2021, Minneapolis, MN. Online.
Burnham, T. R., Wallace. M. G., and Barman, M., “Quantifying the Impact of Structural Fibers on the Performance of Concrete Overlays on Asphalt,” Proceedings of 12th International Conference on Concrete Pavements, ISCP, September 27- October 1, 2021, Minneapolis, MN. Online.
Ghabchi R., Zaman M., Singh D., Barman M., Boeck D.L. (2021) “Effectiveness of Using Polymer-Modified Asphalt Binders in Enhancing Fatigue Life of Asphalt Mixes Containing RAS and RAP,” In: Barla M., Di Donna A., Sterpi D. (eds) Challenges and Innovations in Geomechanics. IACMAG 2021. Lecture Notes in Civil Engineering, vol 125. Springer, Cham. https://doi.org/10.1007/978-3-030-64514-4_15
Barman, M. (corresponding author), Roy S., Tiwari, A. and Burnham, T. R., “Influence of Structural Synthetic Fibers on the Transverse Joint Behavior and Faulting of Ultra-thin and Thin Concrete Pavements,”100th Annual Meeting, Transportation Research Board of the National Academies, Jan 5-29, 2021.
Barman, M. (corresponding author), Crick C., and Burnham, T. R., “Behavior of Ultra-thin and Thin Fiber-Reinforced Pavements on Granular Base,” Proceedings of 12th International Conference on Concrete Pavements, ISCP, Aug 30- Sep 3, 2020, Minneapolis, MN. Accepted. [ Conference postponed because of the Covid-19]
Zaman, M., Ali, S. A., Ghabchi, R., Singh, D. V., and Barman, M., “Fatigue and Low-Temperature Cracking Performance of Asphalt Mixes Containing RAP and RAS,” International IACMAG Symposium, IIT Ghandinagar, Mar 5-7, 2019.
Hansen, B., Barman, M. (corresponding author), “Post-Crack Performance of Synthetic Structural Reinforced concrete,” 13th International Symposium on Concrete Roads, EUPAVE, Berlin, Germany, June 19-22 2018.
Barman, M., Imran, A., Nazari, M., Commuri, S. and Zaman, M., “Use of Intelligent Compaction in Detecting and Remediating Under-Compacted Spots during Compaction of Asphalt Layers,” 5th GeoChina International Conference, HangZhou, China, July 23-25, 2018.
Barman, M. (corresponding author), Hansen, B., Burnham, T., and Masten, M. “Post-Crack Performance of Structural Fiber Reinforced Concrete for Concrete Overlays,” 97th Annual Meeting, Transportation Research Board of the National Academies, Jan 6-11, 2018. Accepted for Presentation and publication in the TRB Annual Meeting online.
Barman, M. (corresponding author), Hansen, B., Burnham, T., and Masten, M. “Post-Crack Performance of Structural Fiber Reinforced Concrete for Concrete Overlays,” 97th Annual Meeting, Transportation Research Board of the National Academies, Jan 6-11, 2018. Accepted for Presentation and publication in the TRB Annual Meeting online.
Arshadi, A., Ghabchi, R., Ali, S. A., Barman, M., Zaman, M., and Commuri, S. “Semi-Circular Bending (SCB) Test on Lab-Produced, Plant-Produced, and Field Warm Mix Asphalts,” 97th Annual Meeting, Transportation Research Board of the National Academies, Jan 6-11, 2018. Accepted for Presentation and publication in the TRB Annual Meeting online.
Barman, M. (corresponding author), Ghabchi, R., Singh, D.V., Zaman, M., and Commuri, S., “A Novel Approach for Fatigue Performance Characterization of Asphalt Mixes Using Indirect Tension Test Data,” resentedin the 96th Annual Meeting of Transportation Research Board. Transportation Research Board of the National Academies, Jan 8-12, 2017, Washington, DC.
Burnham, T. R., Huerta, S. B., and Barman, M., “Characterizing the Movement of Thin Concrete Overlay Panels Subject to Truck Loads,” Conference Proceedings of 11th International Conference on Concrete Pavements, ISCP, August 28-31, 2016, San Antonio, TX.
Barman, M., and Vandenbossche, J. M. “Effects of Bond on the Performance of Thin and Ultra-thin Concrete Overlays on Asphalt Pavement,” Transportation Research Board of the National Academies, Washington, DC, Jan 10-14, 2016, 95th Annual Meeting of Transportation Research Board. Published in Annual Meeting Compendium of Papers
Barman, M., Ghabchi, R., Singh, D. V., Zaman, M., and Commuri, S. “A Comparative Evaluation of Three Different Fatigue Test Methods for Asphalt Mixes” Third Conference of Transportation Research Board Group of India, December 17-20, 2015, Published in the conference proceedings.
Barman, M.(corresponding author), Imran, S.A., Nazari, M., Commuri, S. and Zaman, M. “Intelligent Compaction of Stabilized Subgrade of Flexible Pavement,” International Foundations Congress and Equipment EXPO, IFCEE-2015, San Antonio, Texas. March 17-21, 2015, Published in the ASCE Geotechnical Special Publication No. 256, IFCEE 2015 © ASCE 2015, pp 2554-2566.
Barman, M.(corresponding author), Vandenbossche, J. M., Pandey, B. B. and Singh, D. V. “A Discussion on the Primary Distresses of Bonded Whitetopping to Recommend Improvements to the Indian Design Procedure,” 11th International Conference on Transportation Planning and Implementation Methodologies for Developing Countries, TPMDC, IIT Bombay, India, December 10-12, 2014.
Barman, M.(corresponding author), Nazari, M., Imran, S.A., Commuri, S., Zaman, M., Beainy, F., and Singh, D.V. “Application of Intelligent Compaction Technique in Real-Time Evaluation of Compaction Level During Construction of Subgrade,” Published in the 93rd Annual Meeting Compendium of Papers, Transportation Research Board, Washington DC, 2014.
Barman, M., Vandenbossche, J. M., Li, Z., Adams, T., Ramirez, L., Strommen, R. and Palek, L. “Development of Innovative Techniques for Instrumentation of Composite Pavement Sections at MnROAD,” Published in the 91st Annual Meeting Compendium of Papers, Transportation Research Board, Washington DC, 2012.
Vandenbossche, J. M., Barman, M., Li, Z. and Adams, T. S. “Development of Innovative Techniques for the Instrumentation of Composite and Wet on Wet Pavement Sections at MnROAD,” Proceedings of the 10th International Conference on Concrete Pavements, ISCP, July 8-12, 2012, Quebec City, Canada.
Pal, M., Majumdar, K., Barman, M., and Sarkar, D. “Study of CBR and Electrical Conductivity of Soil-Jute Mixture”, International Conference on pavement Engineering, February 14 – 15, 2009 College of Engineering & Technology, Bhubaneswar PP 39-43.
Barman, M.(corresponding author), Pal., M., Roy., R. B., and Biswas, H. “Application of GIS in Soil Characterization,” Proc. of the International Conference on Civil Engineering in the New Millennium: Opportunities and Challenges" (CENeM-2007), 150th Year Anniversary Conference at Bengal Engineering and Science University, Shibpur, India, Vol. III, 2008, pp. 1426-1432.
Pal, M. and Barman, M. “Study of CBR of Soil Jute Mix and its application in Rural Road,” Proc. of the National Conference and Exposition on Rural Roads, 22-24, May, 2007, Bigyan Bhawan, New Delhi, India, pp: 103-110.
Pal, M. and Barman, M. “Prediction of Remaining Life of an Exiting Rotary Intersection: A case study,” National Conference on Application and Communication Technologies in Urban Infrastructure Planning and Management, Jaya Engineering College, Chennai, India, 2005, pp: 70-75
Saha, S., Saha, A., Barman, M., Sharma, R.P. and Pal, M. “Manufacturing of Bricks using Local Tilla Soil,” NIRMAN, 7th Be-ennial General Conference, State Engineers Association, Tripura, India, 2006, pp: 20-28.
Research Reports
Barman, M. (principal investigator), Kamara, A., Janson, A. “Establishing Fresh Properties of Fiber Reinforced Concrete for Performance Engineered Mixture (PEM): Final Report”. Maplewood, MN: Minnesota Department of Transportation, 2021. Pp 1-176.
Barman, M. (principal investigator), Roy, S, Tiwari, A., and Burnham, T. “Performance Benefits of Fiber-reinforced Thin Concrete Pavement and Overlays: Final Report,” Maplewood, MN: Minnesota Department of Transportation, 2021. Pp 1-176.
Roy, S, Barman, M. (principal investigator), Tiwari, A., and Burnham, T. “Performance Benefits of Fiber-reinforced Thin Concrete Pavement and Overlays: Task 2 Third Year Annual Performance Review,” Maplewood, MN: Minnesota Department of Transportation, 2021. Pp 1-162.
Roy, S., Barman, M. (principal investigator), Tiwari, A., and Burnham, T. “Performance Benefits of Fiber-reinforced Thin Concrete Pavement and Overlays: Tasks 3 and 5- Analysis to determine the influence of fibers in fatigue cracking and slab size of concrete overlays,” Maplewood, MN: Minnesota Department of Transportation, 2021. Pp1-51.
Barman, M. (principal investigator) Crick, C, Tiwari, A., Roy, S and Burnham, T. “Performance Benefits of Fiber-reinforced Thin Concrete Pavement and Overlays: Task 2 Second Year Annual Performance Review,” Maplewood, MN: Minnesota Department of Transportation, 2020. Pp 1-134.
Roy, S., Barman, M. (principal investigator), Tiwari, A., and Burnham, T. “Performance Benefits of Fiber-reinforced Thin Concrete Pavement and Overlays: Task 4- Analysis to Determine Contribution of fibers in Mitigating Joint Faulting,” Maplewood, MN: Minnesota Department of Transportation, 2020. Pp1-48.
Barman, M. Irankunda. G., and Begin, D., (principal investigator). “Optimizing Asphalt Mixture Designs for Low-Volume Roads of Minnesota: Task 2- Literature Review,” Maplewood, MN: Minnesota Department of Transportation, 2020. Pp 1-53.
Kamara, A. and Barman, M. “Establishing Fresh Properties of Fiber Reinforced Concrete for Performance Engineered Mixture (PEM): Task 2- Literature Review,” Maplewood, MN: Minnesota Department of Transportation, 2020. Pp 1-59
Barman, M. (principal investigator) and Crick, C.“Performance Benefits of Fiber-reinforced Thin Concrete Pavement and Overlays: Task 2 First Year Annual Performance Review,” Maplewood, MN: Minnesota Department of Transportation, 2019.
Marasteanu, M., Jia-Liang, L., Hill, Kimberly, Yan, T., Man, T., Turos, M., Barman, M. (Co-principal investigator), Arepalli, *U. M., and *Munch, J. “Experimental and Computational Investigations of High-Density Asphalt Mixtures,” Final Report, Maplewood, MN: Minnesota Department of Transportation, 2019. Pp 1-104.
Barman, M., (principal investigator), Munch, J. and Arepalli, U., “Cost/Benefit Analysis of the Effectiveness of Crack Sealing Techniques: Final Report” Maplewood, MN: Minnesota Department of Transportation, 2019.
Arepalli, U., Barman, M., (principal investigator) and Munch, J., “Cost/Benefit Analysis of the Effectiveness of Crack Sealing Techniques: Task 4 Report- Draft recommendation for the selection of appropriate crack sealing method,” Maplewood, MN: Minnesota Department of Transportation, 2018.
Munch, J. Arepalli, U., and Barman, M. (principal investigator), “Cost/Benefit Analysis of the Effectiveness of Crack Sealing Techniques: Task 3 Report- Performance- and Cost-effectiveness of the Crack Sealing Methods,” Maplewood, MN: Minnesota Department of Transportation, 2018.
Barman, M. (principal investigator), and Hansen, B. “Comparison of Performances of Structural Fibers and Development of a Specification for using Structural Fibers in Thin Concrete Overlays: Final Report,” Maplewood, MN: Minnesota Department of Transportation, 2018.
Munch, J. Arepalli, U., and Barman, M. (principal investigator), “Cost/Benefit Analysis of the Effectiveness of Crack Sealing Techniques: Task 2 Report- Collection and Analysis of Crack Sealing Performance Data,” Maplewood, MN: Minnesota Department of Transportation, 2018.
Munch, J. and Barman, M. (principal investigator), “Cost/Benefit Analysis of the Effectiveness of Crack Sealing Techniques: Task 1 Report- Literature Review,” Maplewood, MN: Minnesota Department of Transportation, 2017.
Hansen, B. and Barman, M. (principal investigator), “Comparison of Performances of Structural Fibers and Development of a Specification for using Structural Fibers in Thin Concrete Overlays: Task 4 Report- Joint Performance of Fiber Reinforced Concrete,” Maplewood, MN: Minnesota Department of Transportation, 2018.
Barman, M. (principal investigator), Hansen, B. and, U. Arepalli. “Performance Benefits of Fiber-reinforced Thin Concrete Pavement and Overlays: Task 1 Literature Review,” Maplewood, MN: Minnesota Department of Transportation, 2018.
Dailey, J., Dave, E., Barman, M. (principal investigator) and Kostick, R. D. “Comprehensive Field Evaluation of Asphalt Patching Methods and Development of Simple Decision Trees and a Best Practices Manual: Final Report” Maplewood, MN: Minnesota Department of Transportation, 2017.
Hansen, B., and Barman, M. (principal investigator) “Comparison of Performances of Structural Fibers and Development of a Specification for using Structural Fibers in Thin Concrete Overlays: Task 3 Report- Flexural Performance of Fiber Reinforced Concrete” Maplewood, MN: Minnesota Department of Transportation, 2017.
Hansen, B., Barman, M., and Rahman, T. U. “Comparison of Performances of Structural Fibers and Development of a Specification for using Structural Fibersin Thin Concrete Overlays (Task 1 Report),” Maplewood, MN: Minnesota Department of Transportation, 2016.
Barman, M., Arshadi, A., Ghabchi, R., Zaman, M., Singh, D., & Commuri, S. Recommended Fatigue Test for Oklahoma Department of Transportation (Final Report). Oklahoma City, OK: Oklahoma Department of Transportation, 2016.
Barman, M., Ghabchi, R., Singh, D. V, Arshadi, A., Zaman, M., and Commuri, S. “Recommended Fatigue Test for Oklahoma Department of Transportation,” 3rd Year Annual Report for the Project ODOT SP&R Item #2243, submitted to Oklahoma Department of Transportation, Oklahoma City, USA, October, 2015.
Ghabchi, R., Zaman, M., Barman, M., Singh, D. Boeck, D. L. “Fatigue Performance of Asphalt Pavements Containing RAS and RAP,” Oklahoma Department of Transportation Materials & Research Division, ODOT SPR Item Number 2245, FINAL REPORT ~ FHWA-OK-15-01, Oklahoma City, OK, 2015.
Commuri, S., Zaman, M., Barman, M., Nazari, M., Imran, S.A., Beainy, F. “Evaluation of Performance of Asphalt Pavements Constructed using Intelligent Compaction Techniques,” Final Report for the Project ODOT SP&R Item #2246, submitted to Oklahoma Department of Transportation, Oklahoma City, USA, December, 2014.
Zaman, M., Commuri, S., Barman, M., Ghabchi, R., and Singh, D.V. “Recommended Fatigue Test for Oklahoma Department of Transportation,” 2nd Year Annual Report for the Project ODOT SP&R Item #2243, submitted to Oklahoma Department of Transportation, Oklahoma City, USA, October, 2014.
Commuri, S., Zaman, M., Barman, M., Nazari, M., Imran, S.A., Beainy, F., Singh, D.V. “Real-time measurement of quality during the compaction of subgrade soils,” Final Report for the Project OTCREOS10.1-11-F, submitted to the Oklahoma Transportation Center, July, 2013.
Commuri, S., Zaman, M., Beainy, F., Singh, D.V., Nazari, M., Imran, S.A., Barman, M. “Pavement Evaluation Using a Portable Lightweight Deflectometer,” Final Report for the Project OTCREOS11.1-14-F, submitted to the Oklahoma Transportation Center, June, 2013.
Commuri, S., Zaman, M., Barman, M., Nazari, M., Imran, S.A., Beainy, F. “Evaluation of Performance of Asphalt Pavements Constructed using Intelligent Compaction Techniques,” First Year Annual Report for the Project ODOT SP&R Item #2246, submitted to Oklahoma Department of Transportation, Oklahoma City, October 2013.
Commuri, S., Zaman, M., Barman, M., Nazari, M., Imran, S.A., Beainy, F. “Continuous Real-Time Measurement of Pavement Quality during Construction,” submitted to Volvo Construction Equipment, Shippensburg, PA, December, 2013.
Zaman, M., Commuri, S., Barman, M., Ghabchi, R., and Singh, D.V. “Recommended Fatigue Test for Oklahoma Department of Transportation,” 1st Year Annual Report for Project ODOT SP&R Item #2243, submitted to Oklahoma Department of Transportation, Oklahoma City, October 2013.
Adams, T., Barman, M., Geary, M., Li, Z., Mu, F., Nassiri, S., Vandenbossche, J. M. “Instrumentation of three Composite Pavements at MnROAD,” Prepared for SHRP 2 R21, University of Pittsburgh, Pittsburgh, PA, 2011.
Barman, M., Dufalla, N., Li, Z., Mu, F. and Vandenbossche, J. M. “Development of a Rational Mechanistic-Empirical Based Design Guide for Thin and Ultra-Thin Whitetopping. Task 4 Report: Climatic Considerations,” FHWA Pooled Fund Study TPF 5-65, Report submitted to MnDOT, 2011.
Barman, M., Vandenbossche, J. M., Mu, F. and Gatti, K. “Development of a Rational Mechanistic-Empirical Based Design Guide for Thin and Ultra-Thin Whitetopping. Task 1 Report: Compilation and Review of Existing Data and Information,” FHWA Pooled Fund Study TPF 5-65, Report submitted to MnDOT, 2010.
Vandenbossche, J. M., Mu, F., Ramirez, L. R., Barman, M., Nassiri, S. and Gatti, K. “Evaluation of the NCHRP 1-37A Mechanistic-Empirical Rigid Pavement Design Guide Procedure, Task 5: Prepare and Execute a Sensitivity Analysis to Evaluate (Validate) the Models,” FHWA Project DTFH61-05-P-00094, Report submitted to FHWA, 2008.
Mu, F., Vandenbossche, J, Nassiri, S., Barman, M., Ramirez, L.C., and Gatti, K.A. “Prepare and Execute Analysis to Evaluate the MEPDG Models,” Tasks 4 & 5 Reports for Federal Highway Administration (FHWA), FHWA Project DTFH61-05-P-00094, FHWA Project DTFH61-05-P-00094, Report submitted to FHWA, 2009.
Barman, M., Sharma, R. P. and Pal, M. “Investigation for Application of Locally available Laterite Soil in Manufacturing of Bricks,” Final Report, submitted to the Pollution control Board, Govt. of Tripura, Agartala, India, 2007.