Publications

Journal Papers - SCI

  1. X. R. Liu, Y. Q. Lin, S. N. Li, Y. C. Lin, V. L. Li,, Y. H. Chen, C. P. Lin, M. Keerthi, S. J. Shih and R. J. Chung* “Polyelectrolyte multilayer coatings for short/long-term release of antibacterial agents”, Surface and Coatings Technology 393, 125696 (2020) (SCI subject: Materials Science, Coatings and Films, N/M=4/19=21.05%; SCI, IF2017:2.906)
  2. Y. J. Chou, H. S. Ningsih, and S. J. Shih*, “Preparation, characterization and investigation of antibacterial silver-zinc co-doped β-tricalcium phosphate by spray pyrolysis,” Ceramics International 46, 16708-16715 (2020) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  3. C. W. Hsiao, M. Oi, K. Shibai, K. I, Mural, T. Moriga*, and S. J. Shih, “Ca2Si5N8:Eu2+ phosphors synthesized in graphite crucibles for enhanced reducing atmosphere”, Modern Physics Letters B 34, 2040023 (2020)
  4. F. F. Bakare, Y. J. Chou, Y. H. Huang, A. H. Tesfay, T. Moriga, and S. J. Shih*, “Correlation of morphology and in-vitro degradation behavior of spray pyrolyzed bioactive glasses,” Materials 12, 3703 (2019) (SCI subject: Materials Science, Multidisciplinary, N/M=111/285=38.95%; SCI, IF2017:2.467)
  5. P. Y. Hsu, H. C. Kuo, W. H. Tuan*, S. J. Shih, M. Naito, P. L. Lai, “Manipulation of the degradation behavior of calcium sulfate by the addition of bioglass,” Journal of Materials Science: Materials in Medicine (under review) (SCI subject: Engineering, Biomedical, N/M=29/78=37.2%; SCI, IF2017:2.448)
  6. A. H. Tesfay, Y. J. Chou, C. Y. Tan, F. F. Bakare, N. T. Tsou, E. W. Huang, S. J. Shih, “Control of dopant distribution in yttrium-doped bioactive glass for selective internal radiotherapy applications using spray pyrolysis”, Materials (Submitted) (SCI subject: Materials Science, Multidisciplinary, N/M=111/285=38.95%; SCI, IF2017:2.467)
  7. P. I. Tsai, T. N. Lam, M. H. Wu, K. Y. Tseng, Y. W. Chang, J. S. Sun, Y. Y. Li, M. H. Lee, S. Y. Chen, C. K. Chang, C. J. Su, C. H. Lin, C. Y. Chiang, C. S. Ku, N. T. Tsou, S. J. Shih, C. C. Wang, and E. W. Huang, “Multi-scale mappling for collagen-regulated mineralization in bone remodeling of additive manufacturing porous implants,” Materials Chemistry and Physics (In press) (SCI subject: Materials Science, Multidisciplinary, N/M=127/285=44.4%; SCI, IF2017:2.210)
  8. Y. J. Chou, C. W. Hsiao, N. T. Tsou, M. H. Wu, and S. J. Shih*, “Preparation and in vitro bioactivity of micron-sized bioactive glass particles using spray drying method,” Applied Science 9,19 (SCI subject: Physics, Applied, N/M=77/146=52.7%; SCI, IF2017:1.689)
  9. Y. J. Chou, K. I. Sucipto, H.S. Ningsih, T. Moriga, and S. J. Shih*, “Inhibition of secondary phase formation with orientation-controlled SrTiO3 nanoparticles, Ceramics International 45, 9197-9202 (2019) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  10. I.C. Lin, C. C. Chang, C. W. Lin, S. J. Shih, C. J. Chang, C. Y. Tsay, J. B. Shi, T. L. Horng, J. H. Chen, J. J. Wu, C. Y. Hung, and C. Y. Chen*, “Low operating temperature CO sensor prepared using SnO2 nanoparticles,” Journal of Electroceramics 41, 28-36 (2018) (SCI subject: Materials Science, Ceramics, N/M=8/27=29.6%; SCI, IF2017:1.238)
  11. X. R. Liu, H. H. Chen, Y. C. Lin, S. C. Nabilla, W. C. Liu, W. C. Wang, S. J. Shih, Y. Q Li, C. P. Lin, G. Zhao, and R. J. Chung*, “Composite polyelectrolyte multilayer and mesoporous bioactive glass nanoparticle coating on 316L stainless steel for controlled antibiotic release and biocompatibility,” Journal of Biomedical Nanotechnology 14, 725-735 (2018) (SCI subject: Materials Science, Biomaterials, N/M=7/33=21.2%; SCI, IF2017:5.068)
  12. B. J. Hong, C. W. Hsiao, F. F. Bakare, J. T. Sun, and S. J. Shih*, “Effect of acetic acid concentration on pore structure for mesoporous bioactive glass during spray pyrolysis,” Materials 11, 963 (2018) (SCI subject: Materials Science, Multidisciplinary, N/M=111/285=38.95%; SCI, IF2017:2.467)
  13. S. J. Shih, C. Y. Chou, H. Abadi, S. H. Lin, and C. W. Hsiao, “Morphology control of Eu-doped amorphous gehlenite phosphors prepared by spray pyrolysis”, Journal of Nanosicence and Nanotechnology, 18 5849-5853 (2018) (SCI subject: Chemistry, Multidisciplinary, N/M=114/171=66.7%; SCI, IF2017:1.354)
  14. T. Y. Li, K. Nakata, T. Moriga, and S. J. Shih*, “Modification of grain boundary structure of SrTiO3 using hydroxyl additives”, Ceramics International 44, 3960-3965 (2018) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  15. C. K. Lin, P. C. Lin, S. J. Shih, C. J. Chang, J. B. Shi, and C. Y. Chen*, “Pseudocapacitive performance of manganese oxide coated hierarchical cobalt oxide structure prepared by hydrothermal process,” Ceramics International 43, S739-746 (2017) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  16. S. J. Shih*, B. J. Hong, and Y. C. Lin, “Novel graphene oxide-containing antibacterial mesoporous bioactive glass”, Ceramics International 43, S784-788 (2017) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  17. C. N. Cheng, R. T. Liou, J. M. Song*, and S. J. Shih, “High-power current and fatigue sustainable circuit prepared using low-temperature spray pyrolyzed submicron silver particles”, RSC Advances 7, 40940-40945 (2017) (SCI subject: Materials Science, Ceramics, N/M=71/171=41.52%; SCI, IF2017:2.936)
  18. B. J. Hong, and S. J. Shih*, “Novel pore-forming agent to prepare of mesoporous bioactive glass using one-step spray pyrolysis”, Ceramics International 43, S771-775 (2017) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  19. S. J. Shih*, W. L. Tzeng, Z. M. Wang, P. Veteška, D. Galusek, and W. H. Tuan, “Surface modification of starting powder for dense polycrystalline SrTiO3 ceramics”, Ceramics International 43, S10-14 (2017) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  20. Y. J. Chou, B. J. Hong, Y. C. Lin, C. Y. Wang, and S. J. Shih, “The correlation of pore size and bioactivity of spray-pyrolyzed mesoporous bioactive glass”, Materials 10, 488 (2017) (SCI subject: Materials Science, Multidisciplinary, N/M=111/285=38.95%; SCI, IF2017:2.467)
  21. V. R. Mudinepalli, Y. C. Chen, P. C. Chang, C. C. Hsu, C. Y. Tsai, H. C. Chiu, C. T. Wu, H. W. Yen, S. J. Shih, and W. C. Lin*, “Hydrogenation effect on uniaxial magnetic anisotropy of a CoxPd1-x alloy microstructure”, Journal of Alloys and Compounds 695, 2365-2373 (2017) (SCI subject: Metallurgy & Metallurgical Engineering, N/M=4/75=5.33%; SCI, IF2017: 3.779)
  22. S. J. Shih*, Y. C. Lin, S. H. Lin and C. Y. Yu, “Correlation of morphology and photoluminescence properties of gehlenite: Eu glassy phosphors”, International Journal of Applied Ceramic Technology 14, 56-62 (2017) (SCI subject: Materials Science, Ceramics, N/M=9/27=33.33%; SCI, IF2017:1.165)
  23. W. L. Tzeng, H. W. Yen, W. C. Lin and S. J. Shih*, “Conductivity enhancement from using grain boundary engineering”, Ceramics International 43, 2361-2367 (2017) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  24. S. J. Shih* and D. R. Widagdyo, “Preparation of mesoporous SrTiO3 particles by spray pyrolysis method”, Journal of Nanoscience and Nanotechnology 17, 3557-3565 (2017) (SCI subject: Chemistry, Multidisciplinary, N/M=114/171=66.67%; SCI, IF2017:1.354)
  25. S. J. Shih*, D. R. M. Sari and Y. C. Lin, “Influence of chemical composition on the bioactivity of spray pyrolyzed mesoporous bioactive glass”, International Journal of Applied Ceramic Technology 13, 787-794 (2016) (SCI subject: Materials Science, Ceramics, N/M=9/27=33.33%; SCI, IF2017:1.165)
  26. F. Y. Fan, M. S. Chen, C. W. Wang, S. J. Shih, C. Y. Chen, Y. N. Pan, and C. K. Lin*, “Preparation and characterization of silver nanocrystals decorated mesoporous bioactive glass via synchrotron X-ray reduction,” Journal of Non-Crystalline Solids 450, 128-134 (2016) (SCI subject: Materials Science, Ceramics, N/M=4/27=14.81%; SCI, IF2017:2.488)
  27. S. J. Shih*, C. Y. Chen, Y. C. Lin, J. C. Lee and R. J. Chung, “Investigation of bioactive and antibacterial effects of graphene oxide-doped bioactive glass”, Advanced Powder Technology 27, 1013-1020 (2016) (SCI subject: Engineering, Chemical, N/M=38/137=27.74%; SCI, IF2017:2.943)
  28. K. Haladejova, A. Pmova, R. Klement, W. H. Tuan, S. J. Shih, and D. Galusek, “Aluminate glass based phosphors for LED applications”, Journal of the European Ceramic Society 36, 2969-2973 (2016) (SCI subject: Materials Science, Ceramics; N/M=1/27=3.7%; SCI, IF2017:3.794)
  29. W. L. Tzeng, T. L. Sun and S. J. Shih*, “Grain boundary engineering by shape-control of SrTiO3 nanocrystals”, Advanced Powder Technology 27, 799-807 (2016) (SCI subject: Engineering, Chemical, N/M=38/137=27.74%; SCI, IF2017:2.943)
  30. Y. J. Chou, S. H. Lin, C. J. Shih, S. L. Y. Chang, and S. J. Shih*, “The effect of Ag dopant on the bioactivity and antibacterial properties of one-step synthesized Ag-containing mesoporous bioactive glasses”, Journal of Nanoscience and Nanotechnology 16, 10001-10007 (2016) (SCI subject: Chemistry, Multidisciplinary, N/M=114/171=66.67%; SCI, IF2017:1.354)
  31. S. J. Shih*, Y. C. Lin, S. H. Lin, P. Veteška, D. Galusek, and W. H. Tuan, “Preparation and characterization of Eu-doped gehlenite glassy particles using spray pyrolysis”, Ceramics International 42, 11324-11329 (2016) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  32. S. J. Shih*, Y. C. Lin, L. V. P. Panjaitan and D. R. M. Sari, “The correlation of surfactant concentrations on the properties of mesoporous bioactive glass”, Materials 9, 58 (2016) (SCI subject: Materials Science, Multidisciplinary, N/M=111/285=38.95%; SCI, IF2017:2.467)
  33. R. Y. Capangpangan, M. A. C. dela Rosa, R. P. Obena, Y. J. Chou, D. L. Tzou, S. J. Shih, M. H. Chiang, C. C. Lin, and Y. J. Chen, “Monodispersity of magnetic immune-nanoprobes enhances detection sensitivity of low abundant biomarker in one drop of serum”, Analyst 140, 7678-7868 (2015) (SCI subject: Chemistry, Analytical, N/M=12/81=14.81%; SCI, IF2017:3.864)
  34. S. J. Shih*, W. L. Tzeng, Y. J. Chou, C. Y. Chen, and Y. J. Chen, “The influence of phase separation on bioactivity of spray pyrolyzed bioactive glass”, Journal of Nanoscience and Nanotechnology15,4688-4696 (2015) (SCI subject: Chemistry, Multidisciplinary, N/M=114/171=66.67%; SCI, IF2017:1.354)
  35. W. L. Tzeng and S. J. Shih*, “Template-free synthesis of hollow porous strontium titanate particles”, Journal of the American Ceramic Society 98, 386-391 (2015) (SCI subject: Materials Science, Multidisciplinary, N/M=3/27=11.11%; SCI, IF2017:2.956)
  36. S. J. Shih*, W. L. Tzeng, R. Jatnika, C. J. Shih and K. B. Borisenko, “Control of Ag nanoparticle distribution influencing bioactive and antibacterial properties of Ag-doped mesoporous bioactive glass particles prepared by spray pyrolysis”, Journal of Biomedical Materials Research B 103, 899-907 (2015) (SCI subject: Engineering, Biomedical, N/M=17/78=21.79%; SCI, IF2017:3.373)
  37. S. J. Shih*, W. L. Tzeng, W. L. Kuo, “Fabrication of ceria particles using glycine nitrate spray pyrolysis”, Surface and Coatings Technology 259, 203-309 (2014) (SCI subject: Materials Science, Coatings and Films, N/M=4/19=21.05%; SCI, IF2017:2.906)
  38. S. J. Shih* and W. L. Tzeng, “Manipulation of morphology of strontium titanate particles by spray pyrolysis”, Powder Technology 264, 291-297 (2014) (SCI subject: Engineering, Chemical, N/M=30/137=21.90%; SCI, IF2017: 3.230)
  39. C. Y. Chen*, K. H. Chang, H. Y. Chiang and S. J. Shih, “Preparation of a porous ceria coating for a resistive oxygen sensor”, Sensors and Actuators B: Chemical 204, 31-41 (2014) (SCI subject: Instruments and Instrumentation, N/M=2/61=3.28%; SCI, IF2017:5.667)
  40. S. J. Shih, Y. J. Chou, C. Y. Chen and C. K. Lin*, “One-step synthesis and characterization of nanosized bioactive glass”, Journal of Medical and Biological Engineering 34 18-23 (2014) (SCI subject: Engineering, Biomedical, N/M=61/78=78.21%; SCI, IF2017:1.211)
  41. S. J. Shih*, Y. J. Chou and K. B. Borisenko, “Preparation method-structure-bioactivity correlation in mesoporous bioactive glass”, Journal of Nanoparticle Research 15, 1763 (2013) (SCI subject: Materials Science, Multidisciplinary, N/M=137/285=48.07%; SCI, IF2017:2.127)
  42. S. J. Shih*, Y. J. Chou and L. V. P. Panjaitan, “Synthesis and characterization of spray pyrolyzed mesoporous bioactive glass”, Ceramics International 39, 8773-8779 (2013) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  43. S. J. Shih* and I. C. Chien, “Preparation and characterization of nanostructured silver particles by one-step spray pyrolysis”, Powder Technology 237, 436-441 (2013) (SCI subject: Engineering, Chemical, N/M=30/137=21.90%; SCI, IF2017: 3.230)
  44. S. K. Lee, W. H. Tuan*, Y. Y. Wu and S. J. Shih, “Microstructure–thermal properties of Cu/Al2O3 bilayer prepared by direct bonding”, Journal of the European Ceramic Society 33, 277-285 (2013) (SCI subject: Materials Science, Ceramics; N/M=1/27=3.7%; SCI, IF2017:3.794)
  45. C. Y. Chen*, C. Y. Chiang, S. J. Shih, C. Y. Tsay and C. K. Lin, “High supercapacitive performance of sol–gel ZnO-doped manganese oxide coatings”, Thin Solid Films 528, 23-27 (2013) (SCI subject: Physics, Applied, N/M=64/146=43.84%; SCI, IF2017:1.939)
  46. S. J. Shih* and J. P. Huang, “Designing the morphology of ceria particles by precursor complexes”, Ceramics International 39, 2275-2281 (2013) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  47. C. Y. Chen*, H. W. Chang, S. J. Shih, C. Y. Tsay, C. J. Chang and C. K, Lin, “High supercapacitive stability of spray pyrolyzed ZnO-added manganese oxide coatings”, Ceramics International 39, 1885-1892 (2013) (SCI subject: Materials Science, Ceramics, N/M=2/27=7.41%; SCI, IF2017:3.057)
  48. S. J. Shih*, Y. J. Chou and I. C. Chien, “One-step synthesis of bioactive glass by spray pyrolysis”, Journal of Nanoparticle Research 14, 1299 (2012) (SCI subject: Materials Science, Multidisciplinary, N/M=137/285=48.07%; SCI, IF2017:2.127)
  49. S. J. Shih*, Y. J. Yu and Y. Y. Wu, “Manipulation of dopant distribution in yttrium-doped ceria particles”, Journal of Nanoscience and Nanotechnology 12, 7954-7962 (2012) (SCI subject: Chemistry, Multidisciplinary, N/M=114/171=66.67%; SCI, IF2017:1.354)
  50. S. J. Shih*, Y. Y. Wu, Y. J. Chou and K. B. Borisenko, “Nanoscale control of composition in cerium and zirconium mixed oxide nanoparticles”, Materials Chemistry and Physics 135, 749-754 (2012) (SCI subject: Materials Science, Multidisciplinary, N/M=127/285=44.56%; SCI, IF2017: 2.210)
  51. P. J. Wang, C. H. Lin*, S. L. Chang and S. J. Shih*, “Facile, efficient synthesis of a phosphinated hydroxyl diamine, and properties of its high-performance poly (hydroxyl imides) and polyimide/SiO2 hybrids”, Polymer Chemistry 3, 2867-2874 (2012) (SCI subject: Polymer Science, N/M=8/87=9.20%; SCI, IF2017:4.927)
  52. S. J. Shih*, Y. Y. Wu, C. Y. Chen and C. Y. Yu, “Morphology and formation mechanism of ceria nanoparticles by spray pyrolysis”, Journal of Nanoparticle Research 14, 879-888 (2012) (SCI subject: Materials Science, Multidisciplinary, N/M=137/285=48.07%; SCI, IF2017:2.127)
  53. S. Atla, C. Y. Chen, C. C. Chen, S. J. Shih, P. Y. Lin, P. H. Chung, J. S. Yang, A. S. Redd, K. C. Cheng and Y. F. Chang, “Foam fractionation of ZnO crystal growth and its photocatalysis of the degradation of methylene blue”, Journal of Materials Research 27, 2503-2510 (2012) (SCI subject: Materials Science, Multidisciplinary, N/M=189/285=66.32%; SCI, IF2017: 1.495)
  54. S. Mondal, J. L. Her, F. H. Chen, S. J. Shih and T. M. Pan*, “Improved resistance switching characteristics in Ti-doped Yb2O3 for resistive nonvolatile memory devices”, IEEE Electron Device Letters 33, 1069-1071 (2012) (SCI subject: Engineering, Electrical & Electronic, N/M=53/260=20.38%; SCI, IF2017:3.433)
  55. S. Mondal, S. J. Shih, F. H. Chen and T. M Pen*, “Structural and electrical characteristics of Lu2O3 dielectrics embedded MIM capacitors for analog IC applications”, IEEE Transactions on Electron Devices 59, 1750-1756 (2012) (SCI subject: Physics,Applied, N/M=47/146=32.19%; SCI, IF2017: 2.620)
  56. S. Mondal, J. L. Her, S. J. Shih and T. M. Pan*, “Structural and electrical characterization of Lu2O3 dielectric layer for high performance analog metal-insulator-metal capacitors”, Journal of The Electrochemical Society 159, H589-H594 (2012) (SCI subject: Materials Science, Coatings & Films; N/M=2/19=10.53%; SCI, IF2017:3.662)
  57. J. S. Wu, B. Zhu, Y. Q. Mi, S. J. Shih, J. Wei and Y. Z. Huang*, “A novel core-shell nanocomposite electrolyte for low temperature fuel cells”, Journal of Power Sources 201, 164-168 (2012) (SCI subject: Energy & Fuels, N/M=9/97=9.28%; SCI, IF2017: 6.945)
  58. S. J. Shih*, Y. Y. Wu and K. B. Borisenko, “Control of morphology and dopant distribution in yttrium-doped ceria nanoparticles”, Journal of Nanoparticle Research 13, 7021-7028 (2011) (SCI subject: Materials Science, Multidisciplinary, N/M=137/285=48.07%; SCI, IF2017:2.127)
  59. S. J. Shih* and W. H. Tuan, “Reducing the solubility of Ag into BaTiO3 by alloying Ag with Pd”, Journal of the European Ceramic Society 31, 2981-2985 (2011) (SCI subject: Materials Science, Ceramics; N/M=1/27=3.7%; SCI, IF2017:3.794)
  60. S. J. Shih, R. Sharghi-Moshtaghin, M. R. DeGuire, R. Goettler, Z. L. Xing, Z. Liu, and A. H. Heuer*, “Mn valence determination for lanthanum strontium manganite solid oxide fuel cell cathodes”, Journal of The Electrochemical Society 158, B1276-1280 (2011) (SCI subject: Materials Science, Coatings & Films; N/M=2/19=10.53%; SCI, IF2017:3.662)
  61. S. J. Shih, P. R. Herrero, G. Q. Li, C. Y. Chen, and S. Sergio Lozano-Perez*, “Characterization of mesoporosity in ceria particles using electron microscopy”, Microscopy and Microanalysis 17, 54-60 (2011) (SCI subject: Microscopy; N/M=3/10=30.00%; SCI, IF2017:2.124)
  62. G. Q. Li*, S. J. Shih and L. Fu, “Growth and electron microscopy study of GaN/MgAl2O4 heterostructures”, Physica Status Solidi A 207, 1302-1304 (2010) (SCI subject: Physics, Applied, N/M=71/146=48.63%; SCI, IF2017: 1.795)
  63. G. Q. Li*, S. C. Mu, and S. J. Shih, “Achieving atomically flat surfaces for LiGaO2 substrates for epitaxial growth of GaN films”, Materials Science and Engineering B 170, 9-14. (2010) (SCI subject: Materials Science, Multidisciplinary, N/M=77/285=27.02%; SCI, IF2017:3.316)
  64. S. von Alfthan, N. A. Benedek, L. Chen, A. Chua, D. J. H. Cockayne, K. J. Dudeck, C. Elsasser, M. W. Finnis, C. T. Koch, B. Rahmati, M. Rühle, S. J. Shih and A. P. Sutton, “The structure of grain boundaries in strontium titanate: theory, simulation, and electron microscopy”, Annual Review of Materials Research 40, 557-599 (2010) (SCI subject: Materials Science, Multidisciplinary, N/M=11/285=3.86%; SCI, IF2017:15.846)
  65. S. J. Shih, K. B. Borisenko, L. J. Liu and C. Y. Chen*, “Multiporous ceria nanoparticles prepared by spray pyrolysis”, Journal of Nanoparticle Research 12, 1553-1559 (2010) (SCI subject: Materials Science, Multidisciplinary, N/M=137/285=48.07%; SCI, IF2017:2.127)
  66. G. Li*, S. J. Shih and Z. Fu, “A new system for synthesis of high quality nonpolar GaN thin films”, Chemical Communications 46, 1206-1208 (2010) (SCI subject: Chemistry, Multidisciplinary, N/M=28/171=16.37%; SCI, IF2017: 6.290)
  67. G. Li*, S. J. Shih, S. Mu, T. Wang and W. Jie, “Study of Te nano-precipitates in CdZnTe crystals”, Journal of Materials Research 25, 1298-1303 (2010) (SCI subject: Materials Science, Multidisciplinary, N/M=189/285=66.32%; SCI, IF2017: 1.495)
  68. S. J. Shih, S. Lozano-Perez and D. J. H. Cockayne*, “Investigation of grain boundaries for abnormal grain growth in polycrystalline SrTiO3”, Journal of Materials Research 25, 260-265 (2010) (SCI subject: Materials Science, Multidisciplinary, N/M=189/285=66.32%; SCI, IF2017: 1.495)
  69. M. Bäurer*, S. J. Shih, C. Bishop, M. P. Harmer, D. Cockayne and M.J. Hoffmann, “Abnormal grain growth in undoped strontium titanate”, Acta Materialia 58, 290-300 (2010) (SCI subject: Metallurgy & Metallurgical Engineering, N/M=1/75=1.33%; SCI, IF2017:6.036)
  70. S. J. Shih*, L.Y. Chang, C.Y. Chen, K. B. Borisenko and D. J. H. Cockayne, “Nanoscale yttrium distribution in yttrium-doped ceria powder”, Journal of Nanoparticle Research 11, 2145-2152 (2009) (SCI subject: Materials Science, Multidisciplinary, N/M=137/285=48.07%; SCI, IF2017:2.127)
  71. A. Al-Saadi, C. H. Yu, V. Khutoryanskiy, S. J. Shih, A. Crossley and S. C. E. Tsang*, “Layer-by-layer electrostatic entrapment of protein molecules on superparamagnetic nanoparticle: new strategy to enhance adsorption capacity and maintain biological activity”, Journal of Physical Chemistry C 113, 15260-15265 (2009) (SCI subject: Materials Science, Multidisciplinary, N/M=54/285=18.95%; SCI, IF2017: 4.484)
  72. S. J. Shih, G. Li, D. J. H. Cockayne and K. B. Borisenko*, “Mechanism of dopant distribution: an example of nickel-doped ceria nanoparticles”, Scripta Materialia 61, 832-835 (2009) (SCI subject: Metallurgy & Metallurgical Engineering, N/M=3/75=4.00%; SCI, IF2017:4.163)
  73. S. J. Shih, C. Bishop and D. J. H. Cockayne*, “Distribution of S3 misorientations in polycrystalline strontium titanate”, Journal of the European Ceramic Society 29, 3023-3029 (2009) (SCI subject: Materials Science, Ceramics; N/M=1/27=3.7%; SCI, IF2017:3.794)
  74. L. F. Zagonel*, M. Bäurer, A. Bailly, O. Renault, M. Hoffmann, S. J. Shih, D. Cockayne and N. Barrett, “Orientation dependent work function of in situ annealed strontium titanate”, Journal of Physics: Condensed Matter 21, 314013-1-5 (2009) (SCI subject: Physics, Condensed Matter, N/M=27/67=40.30%; SCI, IF2017:2.617)
  75. S. J. Shih, Y. Huang*, Y. R. Lyu and C. Y. Chen, “Cross-sectional observation of yttrium and nickel oxide doped ceria powder”, Journal of Nanoscience and Nanotechnology 9, 3898-3903 (2009) (SCI subject: Chemistry, Multidisciplinary, N/M=114/171=66.67%; SCI, IF2017:1.354)
  76. Y. Zhang*, Y. Huang, Y. Wang, X. Ji, S. J. Shih, and B. Jia, “Study of nano-Ag particles doped TiO2 prepared by photocatalysis”, Journal of Nanoscience and Nanotechnology 9, 3904-3908 (2009) (SCI subject: Chemistry, Multidisciplinary, N/M=114/171=66.67%; SCI, IF2017:1.354)
  77. C. H. Yu, A. Al-Saadi, S. J. Shih, L. Qiu, K. Y. Tam, and S. C. Tsang*, “Immobilization of BSA on silica-coated magnetic iron oxide nanoparticle”, Journal of Physical Chemistry C, 113 537-543 (2009) (SCI subject: Materials Science, Multidisciplinary, N/M=54/285=18.95%; SCI, IF2017: 4.484)
  78. G. Li*, S. J. Shih, Y. Huang, T. Wang and W. Jie, “Nanostructures of defects in CdZnTe single crystals”, Journal of Crystal Growth, 311 85-89 (2008) (SCI subject: Physics, Applied, N/M=75/146=51.37%; SCI, IF2017:1.742)
  79. L. F. Zagonel*, N. Barrett, O. Renault, A. Bailly, M. Bäurer, M. Hoffmann, S. J. Shih and D. J. H. Cockayne, “Orientation dependent surface composition of in situ annealed strontium titanate”, Surface and Interface Analysis 40, 1709-1712 (2008) (SCI subject: Chemistry, Physical, N/M=119/147=80.95%; SCI, IF2017:1.263)
  80. S. J. Shih, M. B. Park and D. J. H. Cockayne*, “The interpretation of indexing of high Σ CSL grain boundaries from ceramics”, Journal of Microscopy, 227 309-314 (2007) (SCI subject: Microscopy, N/M=5/10=50.00%; SCI, IF2017:1.693)
  81. M. B. Park, S. J. Shih and D. J. H. Cockayne*, “The preferred CSL misorientation distribution in polycrystalline SrTiO3”, Journal of Microscopy, 227 292-297 (2007) (SCI subject: Microscopy, N/M=5/10=50.00%; SCI, IF2017:1.693)
  82. S. J. Shih and W. H. Tuan, “Solubility of Ag and Pd in BaTiO3”, Journal of the American Ceramic Society 87, 401-407 (2004) (SCI subject: Materials Science, Multidisciplinary, N/M=3/27=11.11%; SCI, IF2017:2.956)
  83. C. J. Shih, S. J. Shih, H. C. Lin, H. H. Yeh, and Y. C. Hung, “Thermal-decomposition and crystallization behaviour of coupling agents for silver paste application”, Nanotechnology 14, 1014-1018 (2003) (SCI subject: Physics, Applied, N/M=30/146=20.55%; SCI, IF2017:3.404)

Patents

01. J. M. Song, S. J. Shih, I. C. Chien and C. H. Tsai, “Method for preparing complex jointing materials” ROC Patent 21501595, 06/21/2013-06/21/2033

02. S. J. Shih, I. C. Chien and Y. H. Wu, “Method for preparing hollow silver particles and core-shell silver particles,” US Patent 20150010769 A1, 07/03/2013-07/03/2033

03. S. J. Shih, Y. J. Chou and C. K. Lin, “Method for manufacturing bioactive glass and bioactive glass,” US Patent 20140348941 A1, 11/07/2013-11/07/2033

04. S. J. Shih, Y. J. Chou and C. K. Lin, “Method for manufacturing bioactive glass and bioactive glass,” ROC Patent 201444592, 05/24/2013-05/24/2033

05. S. J. Shih, I. C. Chien and Y. H. Wu, “Method for preparing silver particles and core-shell silver particles,” ROC Patent 201501788, 07/03/2013-07/03/2033

06. H. C. Lin, C. J. Shih, H. H. Yeh, H. N. Lin and S. J. Shih, “Discrete component and structure of fabrication thereof”, ROC Patent 544694, 08/01/2003-08/01/2023

07. Y. C. Hung, H. C. Lin, C. J. Shih and S. J. Shih, “Conductive layers and fabrication methods thereof”, ROC Patent I243004, 11/01/2005-11/01/2025

08. Y. C. Hung, H. C. Lin, C. J. Shih and S. J. Shih, “Conductive layers and fabrication methods thereof”, US Patent 7135394, 11/14/2006-11/14/2026

09. W. H. Tuan, S. J. Shih and K. S. Ting, “Platinum-free and palladium-free conductive adhesive and electrode formed thereby”, US Patent 2009/0305073A1, 12/10/2009-12/10/2029

10. W. H. Tuan, S. J. Shih and K. S. Ting, “Platinum-free and palladium-free conductive adhesive and electrode formed thereby”, ROC Patent 200951200, 12/16/2009-12/16/2029

Conference Presentations

01. H. S. Ningshi, H. M. Maulidiah, and S. J. Shih “Synthesis and antibacterial activity of Cu-doped β-Tricalcium phosphate prepared by spray pyrolysis,” The 2019 Annual Meeting of the Materials Research Societies-Taiwan, Tainan, Taiwan, Nov 15-16 (2019)

02. Y. H. Huang and S. J. Shih “Characterization of spherical Tb doped Y4SiAlO8 fluorescent powder prepared by spray pyrolysis,“ The 2019 Annual Meeting of the Materials Research Societies-Taiwan, Tainan, Taiwan, Nov 15-16 (2019)

03. Y. H. Huang and S. J. Shih, “Luminescence Characteristics of Spray Pyrolyzed Y4SiAlO8N:2%Tb3+ Phosphor Particles,” 2019 Taiwan Tech-KyuTech on Materials Engineering Workshop, Taipei, Taiwan, Nov 19-20 (2019) (Honorable oral presentation award)

04. T. W. Wu and S. J. Shih, “Investigation of antibacterial and bioactivity effect of mesoporous bioactive glass contained strontium,” 2019 Taiwan Tech-KyuTech on Materials Engineering Workshop, Taipei, Taiwan, Nov 19-20 (2019)

05. Y. J. Chou, H. S. Ningshia, and S. J. Shih, “Synthesis, characterization and antibacterial activity of Ag-Zn co-doped beta tricalcium phosphate prepared by spray pyrolysis,” The 13th Pacific Rim Conference of Ceramic Societies (PACRIM 13), Okinawa, Japan, Oct. 17-Nov. 1 (2019)

06. Y. C. Kuo, H. H. Shih, Y. C. Lin, and S. J. Shih, “Cytotoxicity and degradability of collagen filler containing bioactive glass and βTCP” The 13th Pacific Rim Conference of Ceramic Societies (PACRIM 13), Okinawa, Japan, Oct. 17-Nov. 1 (2019)

07. C. Y. Peng, L. P. Richardo, and S. J. Shih, “Antibacterial and biological activities of mesoporous bioactive glass with dopants of silver strontium,” The 13th Pacific Rim Conference of Ceramic Societies (PACRIM 13), Okinawa, Japan, Oct. 17-Nov. 1 (2019)

08. C. Y. Tan and S. J. Shih, “Synthesis and characterizations of 58S bioactive glass granulated with Polyvinyl Alcohol(PVA) binder using spray drying,” The 2019 Annual Meeting of the Taiwan Ceramic Society, Hualien, Taiwan, May 17-18 (2019)

09. P. C. Tsai and S. J. Shih, “Synthesis and characterization of granulated bioactive glass for drug delivery applications,” The 2019 Annual Meeting of the Taiwan Ceramic Society, Hualien, Taiwan, May 17-18 (2019)

10. H. H. Shih and S. J. Shih, “Cytotoxicity and degradation behavior of bioglass and βTCP-codoped collagen fillers,” The 2019 Annual Meeting of the Taiwan Ceramic Society, Hualien, Taiwan, May 17-18 (2019)

11. C. Y. Peng, L. P. Richardo and S. J. Shih, “Study on mesoporous bioactive glass contained with silver and strontium with their antibacterial and biological activities,” The 2019 Annual Meeting of the Taiwan Ceramic Society, Hualien, Taiwan, May 17-18 (2019) (Oral presentation 3rd place)

12. H. M .Maulidiah and S. J. Shih, “Synthesis and characterization of mesoporous bioactive glass for drug carrier application,” The 2019 Annual Meeting of the Taiwan Ceramic Society, Hualien, Taiwan, May 17-18 (2019)

13. H. S. Ningsih and S. J. Shih, “Antibacterial activity evaluation of monophasic Ag, Zn, and AgZn-doped β-Tricalcium phosphate obtained from Spray pyrolysis,” The 2019 Annual Meeting of the Taiwan Ceramic Society, Hualien, Taiwan, May 17-18 (2019)

14. Y. H. Huang and S. J. Shih, “Luminescence Characteristics of Spray Pyrolyzed Tb doped Y4SiAlO8N Phosphor Particles,” The 2019 Annual Meeting of the Taiwan Ceramic Society, Hualien, Taiwan, May 17-18 (2019) (Oral presentation excellent award)

15. H. H. Shih and S. J. Shih, “Cytotoxicity and degradation behavior of bioactive glass and βTCP-codoped collagen fillers”, 2019 International Advanced Drug Delivery Symposium & Annual Meeting of Biomaterials and Controlled Releases Society (2019 IADDS&BCRS), Hsinchu, Taiwan, March 28-29, 2019

16. P. C. Tsai and S. J. Shih, “Synthesis and characterization of granulated bioactive glass for drug delivery applications”, 2019 International Advanced Drug Delivery Symposium & Annual Meeting of Biomaterials and Controlled Releases Society (2019 IADDS&BCRS), Hsinchu, Taiwan, March 28-29, 2019

17. S. J. Shih, Y. J. Chou, K. I. Scipto, H. S. Ningshi, and T. Moriga, “Inhibition of phase separation in SrTiO3 by controlling surface orientations of starting powder,” Invited Talk, The 5th International Forum on Advanced Technologies, Taipei, Taiwan, March 8 (2019)

18. T. Moriga, A. Fujisaka, Y. Furukawa, K. Murai, S. J. Shih, W. T. Chen, and G. Waterhouse, “Synthesis of tanalum nitride with an inverse opal structure,” The 5th International Forum on Advanced Technologies, Taipei, Taiwan, March 8 (2019)

19. J. T. Sun, Y. Mizuta, Y. Umeoka, K. Shizukawa, S. J. Shih, K. Murai, and T. Moriga “Effects of temperature on morphology and performance of hydrothermally-synthesized lithium titanium oxynitride electrodes,” The 5th International Forum on Advanced Technologies, Taipei, Taiwan, March 8 (2019)

20. L. P. Richardo, and S. J. Shih, “Effects of Sr concentration on Ag-containing mesoporous bioactive glass for bioactivity and antibacterial activity,” The 5th International Forum on Advanced Technologies, Taipei, Taiwan, March 8 (2019)

21. Y. S. Huang, and S. J. Shih “Lumiescence characteristics of spray pyrolyzed Y4SiAlO8N:2%Tb3+ phosphor particles,” The 5th International Forum on Advanced Technologies, Taipei, Taiwan, March 8 (2019) (The best poster award)

22. H. H Shih, T. A. Lin, and S. J. Shih. “Influence of Si concentration on cytotoxicity and bioactivity of spray dried bioactive glass”, The 2018 Annual Meeting of the Materials Research Societies-Taiwan, Taichung, Taiwan, Nov 16-17 (2018)

23. P. C. Tsai, B .J. Hong, and S. J. Shih. “Surfactant-free synthesis of mesoporous bioactive glass for drug delivery”, The 2018 Annual Meeting of the Materials Research Societies-Taiwan, Taichung, Taiwan, Nov 16-17 (2018)

24. C.Y. Tan and S.J. Shih. “Synthesis and characterization of 58S bioactive glass granulated with Polyvinyl butyral binder using spray drying”, The 2018 Annual Meeting of the Materials Research Societies-Taiwan, Taichung, Taiwan, Nov 16-17 (2018)

25. H.S. Ningsih and S. J. Shih. "Investigations of antibacterial activity of silver, zinc, and silver-zinc doped beta-tricalcium phosphate (β-TCP) by spray pyrolysis", The 2018 Annual Meeting of the Materials Research Societies-Taiwan, Taichung, Taiwan, Nov 16-17 (2018)

26. K.I. Sucipto, L.P. Richardo and S.J. Shih. "Influence of silver and zinc doped bioactive glass for antibacterial activity", The 2018 Annual Meeting of the Materials Research Societies-Taiwan, Taichung, Taiwan, Nov 16-17 (2018)

27. A. M. Alviani, S. J. Shih, and W. Widyastuti, “The effect of annealing temperature to photoluminescence properties of glassy Ce3+and Mn2+ -doped CaAl2O4 powder using spray pyrolysis,” 4th International Seminar on Science and Technology (ISST 2018), Surabaya, Indonesia, August 9 (2018)

28. S. J. Ting, Y. Mizuta, Y. Umeoka, K. Shizukawa, S. J. Shih, K. Murai, and T. Moriga, “Synthesis and electrochemical performance of novel rocksalt-type oxynitride LiTin(O, N)Z(n=1.25-2, z=4)” Joint Research Workshop, Tokushima, Japan, July 20 (2018)

29. K. Shibai, K. Fukumura, B. J. Hong, K. Murai, S. J. Shih, and T. Morga, “Large-scale synthesis of novel oxynitrides and optimization as phosphors for backlight emitters in liquid crystal displays” Joint Research Workshop, Tokushima, Japan, July 20 (2018)

30. S. J. Shih “Preparation of bioglass-doped Ti alloy bone implants,” Taiwan Tech 2018 Joint Research Workshop, Taipei, Taiwan, August 22 (2018)

31. S. J. Shih, Z. M. Wang, and T. Moriga, “Preparation of phosphor powder using spray drying ” Joint Research Workshop, Tokushima, Japan, July 20 (2018)

32. S. J. Shih, Z. M. Wang, and T. Moriga, “Synthesis of Ce-doped yttrium aluminum garnet phosphor powders using spray drying,” Joint Research Workshop, Tokushima, Japan, July 20 (2018)

33. Z. M. Wang, D. Galusek, W. H. Tuan, S. J. Shih, “Synthesis of Ce-doped yttrium aluminum garnet phosphor powders using spray drying,” The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology (ICCCI 2018), Kurashiki, Japan, July 9-12 (2018) (The excellent poster award)

34. S. J. Shih and H. H. Shih, “Preparation of bioactive glass-containing Ti6Al4V pedicle screws using 3D printing”, The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology (ICCCI 2018), Kurashiki, Japan, July 9-12 (2018)

35. T. A. Lin, C. W. Hsiao, and S. J. Shih “Synthesis and characterization of spray dried bioactive glass,” The 6th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 54th Summer Symposium on Powder Technology (ICCCI 2018), Kurashiki, Japan, July 9-12 (2018)

36. K. I. Sucipto, H. S. Ningsih, and S. J. Shih, “Inhibition of second phase of SrTiO3 by controlling surface population of staring powder”, The 2018 Annual Meeting of the Taiwan Ceramic Society, Taipei, Taiwan, May 18, (2018) (The excellent poster award)

37. H. S. Ningsih, K. I. Sucipto, and S. J. Shih, “Synthesis and characterization of β-tricalcium phosphate by spray pyrolysis and spray drying”, The 2018 Annual Meeting of the Taiwan Ceramic Society, Taipei, Taiwan, May 18, (2018)

38. A. Hadush and S. J. Shih, “Control of morphology and yttrium distribution in yttrium aluminium silicate glass microsphere by spray pyrolysis”, The 2018 Annual Meeting of the Taiwan Ceramic Society, Taipei, Taiwan, May 18, (2018)

39. S. J. Shih, “Effect of annealing on the photoluminescence properties of Europium-doped gehlenite Phosphors for white light emitting diode application”, The 2018 Annual Meeting of the Taiwan Ceramic Society, Taipei, Taiwan, May 18, (2018)

40. S. J. Shih, C. W. Hsiao, Z. M. Wang, and T. Moriga, “Preparation of Ce-doped yttrium aluminum garnet phosphor particles using one-step spray drying”, International Forum on Advanced Technologies (IFAT2018), Tokushima, Japan, March 8-9 (2018)

41. S. J. Shih, C. W. Hsiao, J. T. Sun, and M. H. Wu, “Effect of acetic acid concentration on pore structure for mesoporous bioactive glass”, International Forum on Advanced Technologies (IFAT2018), Tokushima, Japan, March 8-9 (2018)

42. S. J. Shih, “Preparation and characterization of bioactive glass-doped Ti6Al4V pedicle screws” Invited Talk, Third Taiwan-Japan International Engineering Forum, Taipei, Taiwan, Feb 28- March 1 (2018). (Young researcher presentation award)

43. S. J. Shih, “Preparation of bioactive glass-containing Ti6Al4V powder for pedicle screws”, Invited Talk, 1st Singapore ECS International Symposium on Energy Materials (SESEM 2017), Singapore, Dec 6-9, 2017

44. C. W. Hsiao, B. J. Hong, J. Y. Lin, and S. J. Shih “Synthesis and characterization of spray dried bioactive glass” 1st Singapore ECS International Symposium on Energy Materials (SESEM 2017), Singapore, Dec 6-9, 2017 (Poster award 2nd place)

45. S. J. Shih, C. W. Hsiao, J. T. Sun, and M. H. Wu, “Surfactant-free synthesis of mesoporous bioactive glass” 18th International Union of Materials Research Societies-International Conference in Asia (IUMRS-ICA 2017) Taipei, Taiwan, Nov 5-9, 2017

46. C. W. Hsiao, J. Y. Lin, and S. J. Shih, “Fabrication of bioactive glass-doped Ti6Al4V pedicle screws” 18th International Union of Materials Research Societies-International Conference in Asia (IUMRS-ICA 2017) Taipei, Taiwan, Nov 5-9, 2017 (The excellent powder award)

47. S. J. Shih, Z. M. Wang, D. Dusan, and W. H. Tuan, “Preparation of Ce-doped yttrium aluminum garnet phosphor particles using one-step spray drying”, International Union of Materials Research Societies-International Conference in Asia (IUMRS-ICA 2017) Taipei, Taiwan, Nov 5-9, 2017

48. S. J. Shih, “Surface modification of starting powder for SrTiO3-based transparent ceramics”, Invited Talk, International Union of Materials Research Societies – The 15th International Conference on Advanced Materials (IUMRS-ICAM 2017), Kyoto, Japan, Aug 27-Sep 1, 2017

49. B. J. Hong and S. J. Shih, “Surfactant-free synthesis of mesoporous bioactive glass using spray pyrolysis”, International Union of Materials Research Societies – The 15th International Conference on Advanced Materials (IUMRS-ICAM 2017), Kyoto, Japan, Aug 27-Sep 1, 2017

50. S. H. Lin, S. J. Shih and C. W. Hsiao, “Effects of pore-forming agent on morphologies and photoluminescence properties of Ca2Al2SiO4:Eu3+ glassy phosphors” International Union of Materials Research Societies – The 15th International Conference on Advanced Materials (IUMRS-ICAM 2017), Kyoto, Japan, Aug 27-Sep 1, 2017

51. C. W. Hsiao, T. H. Chang, S. J. Shih, “Synthesis and characterization of low-k porous SiO2 PLA films”, International Union of Materials Research Societies – The 15th International Conference on Advanced Materials (IUMRS-ICAM 2017), Kyoto, Japan, Aug 27-Sep 1, 2017

52. S. J. Shih, “ Preparation of amorphous gehlenite phosphors using spray drying”, The 7th Asian Particle Technology Symposium (APT 2017), Taoyuan, Taiwan, July 30-Aug 3 (2017)

53. T. A. Lin, J. Y. Lin, H. S. Ningsih, M. H. Wu, and S. J. Shih, “Synthesis, biocompatibility, and antibacterial properties of graphene oxide-doped bioactive glass”, The 7th Asian Particle Technology Symposium (APT 2017), Taoyuan, Taiwan, July 30-Aug 3 (2017)

54. S. J. Shih, Z. M. Wang, D. Galusek, and W. H. Tuan, “Surface modification of starting powder for multifunctional tansparent titanate ceramics”, The 15th Conference and Exhibition of the European Ceramic Society (ECerS 2017), Budapest, Hungary, July 9-13 (2017)

55. S. H. Lin, S. J. Shih, A. Habush, D. Galusek, and W. H. Tuan, “Precursor influence on morphology and photoluminescence properties for Eu-doped gehlenite glassy particles”, The 15th Conference and Exhibition of the European Ceramic Society (ECerS 2017), Budapest, Hungary, July 9-13 (2017)

56. L. T. Sun, B. J. Hong, Y. C. Lin and S. J. Shih, “Synthesis of mesoporous bioactive glass using surfactant-free method,” The 2017 Annual Meeting of the Taiwan Ceramic Society, Tainan, Taiwan, May 19 (2017)

57. S. J. Shih, B. J. Hong, and T. Moriga, “The Effect of Powder Surface on the Sintering Behavior of SrTiO3”, The 3rd International Forum on Advanced Technologies (IFAT 2017), Hualien, Taiwan, Mar 9-11, (2017)

58. T. Moriga, R. Minakata, R. Minato, K. Nakata, K. Murai, and S. J. Shih, “Identification of second phase deposited on La-Doped SrTiO3 perovskites synthesized by citric-gel method”, The 3rd International Forum on Advanced Technologies (IFAT 2017), Hualien, Taiwan, Mar 9-11, (2017)

59. B. J. Hong, J. Y. Lin, and S. J. Shih, “ Surfactant-free Synthesis of mesoporous bioactive glass”, The 3rd International Forum on Advanced Technologies (IFAT 2017), Hualien, Taiwan, Mar 9-11, (2017) (Best paper award excellence)

60. J. T. Lin, S. H. Lin and S. J. Shih, “The effect of Eu-doped gehlenite glassy powders on morphology and photoluminescence properties”, The 3rd International Forum on Advanced Technologies (IFAT 2017), Hualien, Taiwan, Mar 9-11, (2017) (Best poster sward excellence)

61. T. Y. Li, K. Nakata, and S. J. Shih, “Modification of grain boundary structure for polycrystal SrTiO3 anode materials using additives”, The 3rd International Forum on Advanced Technologies (IFAT 2017), Hualien, Taiwan, Mar 9-11, (2017) (Best poster award 2nd place)

62. K. Nakata, K. Ikenaga, Y. Shiroi, K. Murai, T. Moriga, S. J. Shih, “ The exhaust gas pressure dependence of electrical property for ITO thin film deposited by DC co-sputtering”, The 3rd International Forum on Advanced Technologies (IFAT 2017), Hualien, Taiwan, Mar 9-11, (2017)

63. C. N. Cheng, R. T. Liou, J. M. Song and S. J. Shih, “High current sustainable circuits prepared by spray pyrolyzed slver particles”, The 11th International Microsystems, Packaging, Assembly and Circuits Technology Conference, Taipei Nangang Exhibition Center, Taiwan, Oct 25-27, (2016)

64. R. T. Liou, C. N. Cheng, S. J. Shih, J. M. Song, “Thermal-sprayed nanostructured silver particles for interconnected applications”, The 11th International Microsystems, Packaging, Assembly and Circuits Technology Conference, Taipei Nangang Exhibition Center, Taiwan, Oct 25-27, (2016)

65. Robert Klement, Katarina Haladejova, Peter Veteska, S. J. Shih, W. H. Tuan and Dusan Galusek “Visible broadband luminescence of transition metals doped aluminates and aluminosilicates (Keynote)”, The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, Taiwan, Dec 4-7, (2016)

66. C. K. Lin, P. C. Lin, C. J. Chang, J. B. Shi, C. Y. Chen and S. J. Shih, “Pseudocapacitive performance of manganese oxide coated hierarchical cobalt oxide structure prepared by hydrothermal process”, The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, Taiwan, Dec 4-7, (2016)

67. C. W. Hsiao, T. H. Chang and S. J. Shih, “Fabrication of low-k porous SiO2/PLA hybrid film”, The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, Taiwan, Dec 4-7, (2016)

68. W. L. Tzeng, Z. M. Wang, Peter Veteska, Dusan Galusek, W. H. Tuan and S. J. Shih, “Surface modification of starting powder for dense polycrystalline SrTiO3”, The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, Taiwan, Dec 4-7, (2016)

69. Y. C. Lin and S. J. Shih, “Novel graphene oxide-containing antibacterial mesoporous bioactive glass”, The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, Taiwan, Dec 4-7, (2016)

70. B. J. Hong and S. J. Shih, “Novel pore-forming agent to prepare of mesoporous bioactive glass using one-step spray pyrolysis”, The 10th Asian Meeting on Electroceramics (AMEC 2016), Taipei, Taiwan, Dec 4-7, (2016)

71. J. N. Jheng, L. T. Liou, J. M. Song and S. J. Shih, “以低溫噴霧裂解法製備次微米銀製備高荷電可靠度導線”, The 2016 Annual Meeting of the Materials Research Societies-Taiwan, Hsinchu, Taiwan, Nov 19-20 (2016)

72. T. A. Lin, Z. M. Wang, P. T. Syu and S. J. Shih, “Synthesis of Cu@Ag core-shell particles using one-step spray pyrolysis”, The 2016 Annual Meeting of the Materials Research Societies-Taiwan, Hsinchu, Taiwan, Nov 19-20 (2016)

73. J. Y. Lin, S. W. Huang, B. J. Hong and S. J. Shih, “Surfactant-free synthesis of mesoporous bioactive glass using spray pyrolysis”, The 2016 Annual Meeting of the Materials Research Societies-Taiwan, Hsinchu, Taiwan, Nov 19-20 (2016)

74. L. T. Sun, B. J. Hong, Y. C. Lin and S. J. Shih, “使用非界面活性劑造孔方式製備介孔生物活性玻璃”, The 2016 Annual Meeting of the Materials Research Societies-Taiwan, Hsinchu, Taiwan, Nov 19-20 (2016)

75. S. H. Lin and S. J. Shih, “Effects of morphology on photoluminescence properties of Ca2Al2SiO7: Eu glassy phosphors”, The 2016 Annual Meeting of the Materials Research Societies-Taiwan, Hsinchu, Taiwan, Nov 19-20 (2016)

76. S. J. Shih and T. Moriga, “Synthesis and characterization of non-stoichiometric SrTiO3 for solid-oxide-fuel-cell,” Joint Research Workshop, Tokushima, Japan, August 9, (2016)

77. B. J. Hong, Y. C. Lin and S. J. Shih, “Fabrication of mesoporous bioglass with superior bioactivities using one-step synthesis,” Joint Research Workshop, Tokushima, Japan, August 9, (2016)

78. K. Nakata, K. Murai, T. Moriga, S. J. Shih and M. Mori, “Synthesis and characterization of La-doped SrTiO3 as interconnector material for SOFC,” Joint Research Workshop, Tokushima, Japan, August 9, (2016)

79. W. L. Tzeng, K. Nakata and S. J. Shih, “The influences of modified strontium titanate on the sintering behaviors”, The 2016 Annual Meeting of the Taiwan Ceramic Society, Pingtung, Taiwan, May 20-21, (2016)

80. T. Y. Li and S. J. Shih, “Modification of grain boundary structure for SrTiO3 using additives and atmospheres” The 2016 Annual Meeting of the Taiwan Ceramic Society, Pingtung, Taiwan, May 20-21, (2016)

81. C. H. Hsu, Y. C. Lin and S. J. Shih, “The effect of bioactivity and antibacterial properties of graphene base materials doped bioactive glass”, The 2016 Annual Meeting of the Taiwan Ceramic Society, Pingtung, Taiwan, May 20-21, (2016)

82. D. R. Widagdyo and S. J. Shih, “Effect of platinum dopants to the microstructure and electrical conductivity of SrTiO3”, The 2016 Annual Meeting of the Taiwan Ceramic Society, Pingtung, Taiwan, May 20-21 (2016)

83. S. H. Lin, Y. C. Lin, S. J. Shih and C. Y. Yu, “Effects of morphology on photoluminescence properties of Ca2Al2SiO7 :Eu glassy phosphors”, The 2016 Annual Meeting of the Taiwan Ceramic Society, Pingtung, Taiwan, May 20-21 (2016)

84. T. Y. Li, D. H. Chang and S. J. Shih, “Fabrication of porous silica particles using natural pore-forming agents of agar by one-step spray pyrolysis”, 13th International Conference on Ceramic Processing Science (ICCPS-13), Nara, Japan, May 8-11 (2016)

85. Y. C. Lin, R. J. Chung and S. J. Shih, “Development of novel antibacterial graphene oxide-doped bioactive glass for the treatment of bone defects”, 13th International Conference on Ceramic Processing Science (ICCPS-13), Nara, Japan, May 8-11 (2016)

86. B. J. Hong, Y. C. Lin and S. J. Shih, “Template-free synthesis of mesoporous bioactive glass”, 13th International Conference on Ceramic Processing Science (ICCPS-13), Nara, Japan, May 8-11 (2016)

87. P. T Syu and S. J. Shih, “Effects of additive on phase separation for spray pryolyzed La0.8Sr0.2MnO3 powder”, 13th International Conference on Ceramic Processing Science (ICCPS-13), Nara, Japan, May 8- 11 (2016)

88. W. L. Tzeng, A. N. V. Swari and S. J. Shih, “Correlation of Σ3 grain boundary population and electrical property in polycrystalline SrTiO3”, 13th International Conference on Ceramic Processing Science (ICCPS-13), Nara, Japan, May 8-11 (2016)

89. S. H. Lin, W. H. Tuan, D. Galusek and S. J. Shih, “Morphology control in amorphous gehlenite: Eu3+ phosphor using spray pyrolysis”, 13th International Conference on Ceramic Processing Science (ICCPS-13), Nara, Japan, May 8-11 (2016)

90. C. H. Hsiao, K. Nakata and S. J. Shih, “Synthesis of calcium-doped ceria thin film electrolytes using thermal spray coating”, 13th International Conference on Ceramic Processing Science (ICCPS-13), Nara, Japan, May 8-11 (2016)

91. K. Nakata, C. H. Hsiao, K. I. Murai, T. Moriga, S. J. Shih and M. Mori, “Synthesis of Ca-doped strontium titanate by spray pyrolysis”, International Forum on Advanced Technologies (IFAT2016), Tokushima, Japan, March 7-8 (2016)

92. S. J. Shih, “Grain boundary engineering on polycrystalline strontium titanate”, Invited talk, International Forum on Advanced Technologies (IFAT2016), Tokushima, Japan, March 7-8 (2016)

93. S. J. Shih, “Surfactant-free synthesis of mesoporous bioactive glass using spray pyrolysis”, Invited talk, The First International Engineering Forum (IEF 2016), Taipei, Taiwan, February 21 (2016)

94. T. Y. Li, A. N. V. Swari and S. J. Shih, “Grain boundary structure modification for SrTiO3 anode materials” , 2015 MRS-T Annual Meeting, Kaohsiung, Taiwan, November 20-21 (2015)

95. W. L. Tzeng and S. J. Shih, “Conductivity enhancement from using grain boundary engineering”, 2015 MRS-T Annual Meeting, Kaohsiung, Taiwan, November 20-21 (2015)

96. W. L. Tzeng and S. J. Shih, “Fabrication and characterization of calcium-doped ceria thin film electrolytes via spray coating”, International Thin Film Conference 2015 (TACT 2015), Tainan, Taiwan, November 15-18 (2015)

97. Y. C. Lin, J. C. Lee and S. J. Shih, “Adhesive property and bioactivity of bioactive glass coated alumina implants”, International Thin Film Conference 2015 (TACT 2015), Tainan, Taiwan, November 15-18 (2015)

98. S. J. Shih and W. L. Tzeng, “Improvement of conductivity for SrTiO3 anodes using grain boundary engineering”, International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications (ACTSEA 2015), Tainan, Taiwan, November 8-11 (2015)

99. C. W. Hsiao and S. J. Shih, “Correlation of yttrium dopant distribution and conductivity for yttrium-doped ceria electrolytes,” International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications (ACTSEA 2015), Tainan, Taiwan, November 8-11 (2015)

100. T. Y. Li, A. N. V. Swari and S. J. Shih, “Grain boundary structure modification for SrTiO3 anode materials,” International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications (ACTSEA 2015), Tainan, Taiwan, November 8-11 (2015) (Best Poster Award)

101. R. Klement, A. Prnová, W. S. Tuan and D. Galusek, “Aluminate and aluminosilicate glass phosphors with rare earth and transient element activators” International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications (ACTSEA 2015), Tainan, Taiwan, November 8-11 (2015)

102. S. J. Shih, “Design and synthesis of novel antibacterial bioactive glass,” 2015 International Symposium on Nano Science and Technology (2015 ISNST), Tainan, Taiwan, October 30-31 (2015)

103. T. Y. Li, D. R. Widagdyo and S. J. Shih, “Preparation of mesoporous SrTiO3 particles by spray pyrolysis method”, 2015 International Symposium on Nano Science and Technology (2015 ISNST), Tainan, Taiwan, October 30-31 (2015)

104. S. J. Shih, C. W. Hsiao and H. T. Chiu, “Fabrication of porous silica particles using natural pore-forming agents of agar and chia-seed”, 2015 International Symposium on Nano Science and Technology (2015 ISNST), Tainan, Taiwan, October 30-31 (2015)

105. W. L. Tzeng, T. L. Sun and S. J. Shih, “Grain boundary engineering by shape-controlled of SrTiO3 nanocrystals” , The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology (ICCCI 2015), Kurashiki, Japan, July 7-10 (2015)

106. P. C. Lin, S. J. Shih and C. Y. Chen, “Pseudocapacitive performance of Co/Mn oxide core-shell structure prepared by hydrothermal process”, The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology (ICCCI 2015), Kurashiki, Japan, July 7-10 (2015)

107. J. R. Huang, C. W. Hsieh and S. J. Shih, “Influence of Ca additive on the ionic conductivity of ceria-based electrolyte” , The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology (ICCCI 2015), Kurashiki, Japan, July 7-10 (2015)

108. S. H. Lin, S. J. Shih, P. Veteška, D. Galusek and W. H. Tuan, “Preparation and characterization of Eu-doped gehlenite glass particles using spray pyrolysis” , The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology (ICCCI 2015), Kurashiki, Japan, July 7-10 (2015)

109. S. J. Shih, C. Y. Chen and Y. C. Lin, “Investigation of antibacterial and bioactive properties for graphene oxide-doped mesoporous bioactive glass ” , The 5th International Conference on the Characterization and Control of Interfaces for High Quality Advanced Materials and the 51st Summer Symposium on Powder Technology (ICCCI 2015), Kurashiki, Japan, July 7-10 (2015)

110. S. J. Shih, “The influence of Ag dopants on the bioactivity and antibacterial properties of Ag-containing bioactive glass”, Invited talk, 8th International Conference on Materials for Advanced Technologies of Materials Research Society of Sigapore and 16th IUMRS –Internationa Conference in Asia (ICMAT 2015 & IUMRS-ICA 2015), Suntec, Singapore, June 28-July 03 (2015)

111. J. C. Liou, C. W. Hsiao and S. J. Shih, “Synthesis and characterization of Apatite/wollastonite glass ceramic particles by spray pyrolysis”, 8th International Conference on Materials for Advanced Technologies of Materials Research Society of Sigapore and 16th IUMRS –Internationa Conference in Asia (ICMAT 2015 & IUMRS-ICA 2015), Suntec, Singapore, June 28-July 03 (2015)

112. D. H. Chang, J. C. Liou, and S. J. Shih, “Fabrication of porous silica particles using spray pyrolysis”, 8th International Conference on Materials for Advanced Technologies of Materials Research Society of Sigapore and 16th IUMRS –International Conference in Asia (ICMAT 2015 & IUMRS-ICA 2015), Suntec, Singapore, June 28-July 03 (2015)

113. S. J. Shih, “Synthesis and characterization of Ag-doped bioactive glass”, Invited talk, International Forum on Advanced Technologies (IFAT2015), Tokushima, Japan, March 9 (2015)

114. W. L. Tzeng and S. J. Shih, “The influences of microstructures and conductivities on SrTiO3 prepared from various precursors and additives”, The 4th International Conference on Engineering and Applied Science (2014 ICEAS), Hokkaido, Japan, July 22-24 (2014)

115. T. L. Sun and S. J. Shih, “Correlation of microstructure sigma 3 grain boundaries and conductivity of for spray pyrolysised strontium titanate anodes”, The 4th International Conference on Engineering and Applied Science (2014 ICEAS), Hokkaido, Japan, July 22-24 (2014)

116. H. C. Hung and S. J. Shih, “Investigation of microstructure and conductivity of samaria-doped ceria electrolytes”, The 4th International Conference on Engineering and Applied Science (2014 ICEAS), Hokkaido, Japan, July 22-24 (2014)

117. Y. J. Chou, J. C. Liu and S. J. Shih, “Investigation of the Influence of correlation between silver dopant on and bioactivity of antibacterial of mesoporous bioactive glasses”, The 4th International Conference on Engineering and Applied Science (2014 ICEAS), Hokkaido, Japan, July 22-24 (2014)

118. S. J. Shih, W. L. Tzeng and T. L. Sun, “Correlation of grain misorienations and conductivities for strontium titanate”, 11th Conference on Solid State Chemistry (SSC 2014), Trencianske Teplice, Slovak Republic, July 6-11 (2014)

119. S. H. Lin, W. L. Tzeng, W. H. Tuan, D. Galusek and S. J. Shih, “Correlation of photoluminescence and crystallinity for SrTiO3:Pr3+, Al3+ particles by spray pyrolysis”, 11th Conference on Solid State Chemistry (SSC 2014), Trencianske Teplice, Slovak Republic, July 6-11 (2014)

120. T. L. Sun, W. L. Tzeng and S. J. Shih, “Characterization and synthesis of SrTiO3: Pr3+, Al3+ phosphor powder using spray pyrolysis”, International Union of Materials Research Societies-International Conference on Electronic Materials 2014 (IUMRS-ICEM 2014), Taipei, Taiwan, June 10-14 (2014)

121. T. L. Sun and S. J. Shih, “Correlation of microstructure and conductivity of spray pyrolysised strontium titanate”, International Union of Materials Research Societies-International Conference on Electronic Materials 2014 (IUMRS-ICEM 2014), Taipei, Taiwan, June 10-14 (2014)

122. Y. J. Chou, L. V. P. Panjaitan and S. J. Shih, “An investigation of bioactive mesoporous glass particles by spray pyrolysis”, International Union of Materials Research Societies-International Conference on Electronic Materials 2014 (IUMRS-ICEM 2014), Taipei, Taiwan, June 10-14 (2014)

123. S. J. Shih, “Designing morphology and chemical composition of ceramic and glassy particles by spray pyrolysis”, Invited talk, 2013 MRS-T Annual Meeting, Jongli, Taiwan, October 18-19 (2013)

124. T. L. Sun and S. J. Shih, “Correlation of microstructure and conductivity of strontium titanate using solid state method and spray pyrolysis”, 2013 MRS-T Annual Meeting, Jongli, Taiwan, October 18-19 (2013)

125. H. C. Hung, J. W. Wang and S. J. Shih, “Correlation of microstructure and conductivity of ceria using solid state method and spray pyrolysis”, 2013 MRS-T Annual Meeting, Jongli, Taiwan, October 18-19 (2013)

126. S. J. Shih, W. L. Kuo and K. Y. Lin, “Preparation of cerium oxide powders using spray pyolrysis for application in oxygen gas sensors”, International Thin Film Conference 2013 (TACT 2013), Taipei, Taiwan, October 05-09 (2013)

127. H. C. Hung, T. L. Sun and S. J. Shih, “Preparation method-microstructure-conductivity correlation in ceria electrolytes”, International Thin Film Conference 2013 (TACT 2013), Taipei, Taiwan, October 05-09 (2013)

128. S. J. Shih, “One-step synthesis of bioactive glass”, The 9th Cross Strait Symposium Seminar on Thin-Film Science and Technology, Taipei, Taiwan, October 05-08 (2013)

129. S. J. Shih, C. Y. Chen and Y. J. Chou, “Design and synthesis of spray pyrolyzed bioactive glass”, 12th International Conference on Ceramic Processing Science (ICCPS-12), Portland, US, August 4-7 (2013)

130. W. L. Tzeng and S. J. Shih, “Synthesis of various morphological powders for strontium titanate by spray pyrolysis”, 12th International Conference on Ceramic Processing Science (ICCPS-12), Portland, US, August 4-7 (2013)

131. C. Y. Chen, K. S. Chang, S. J. Shih and S. C. Wang “Preparation of porous ceria coating for resistive oxygen sensor”, 12th International Conference on Ceramic Processing Science (ICCPS-12), Portland, US, August 4-7 (2013)

132. S. C. Wang, B. J. Huang, C. Y. Chen and S. J. Shih, “Morphology control of two-dimensional SnS nanosheets using SnO and S as precursor”, 12th International Conference on Ceramic Processing Science (ICCPS-12), Portland, US, August 4-7 (2013)

133. W. L. Tzeng and S. J. Shih, “Morphological control of spray pyrolzed SrTiO3 particles,” The 2013 Annual Conference of the Chinese Ceramic Society, Taipei, Taiwan, May 24 (2013)

134. Y. J. Yu, Y. Z. He and S. J. Shih, “Influences on morphologies of precursor-derived bioactive glass prepared by spray pyrolysis,” The 2013 Annual Conference of the Chinese Ceramic Society, Taipei, Taiwan, May 24 (2013)

135. S. J. Shih and W. L. Kuo, “Preparation of cerium oxide powders using spray pyrolysis for application in oxygen gas sensors”, 2012 MRS-T Program of Annual Meeting, Yunlin, Taiwan, November 23-24 (2012)

136. S. J. Shih and J. W. Huang, “Different sintering profile of microstructure in Sm-doped CeO2 electrolyte”, 2012 MRS-T Program of Annual Meeting, Yunlin, Taiwan, November 23-24 (2012)

137. S. J. Shih and I. C. Chien, “Preparation and characterization of nanostructured silver particles by one-step spray pyrolysis”, 2012 MRS-T Program of Annual Meeting, Yunlin, Taiwan, November 23-24 (2012)

138. S. J. Shih and Y. J. Chou, “Synthesis and characterization of mesoporous bioactive glass by spray pyrolysis”, The 12th Asian Bioceramics Symposium, Tainan, Taiwan, November 16-18 (2012)

139. S. J. Shih, C. Y. Chen, Y. J. Chou and C. K. Lin, “Fabrication of bioactive glass by one-step synthesis”, The 12th Asian Bioceramics Symposium, Tainan, Taiwan, November 16-18 (2012)

140. S. J. Shih, “One-step synthesis for cerium oxide based powder”, The 8th Cross Strait Symposium Seminar on Thin-Film Science and Technology, Ningbo, China, October 29-31 (2012)

141. Y. J. Chou, C. J. Shih and S. J. Shih, “Texture evaluation of sol-gel derived mesoporous bioactive glass”, The 2nd International Conference on Engineering and Technology Innovation, Kaohsiung, Taiwan, November 02-06 (2012)

142. Y. J. Yu and S. J. Shih, “Influence of Sr/Ti ratios for microstructure and electrical property in strontium titanate,” The 2012 Annual Conference of the Chinese Ceramic Society, Miaoli, Taiwan, May 25 (2012)

143. S. J. Shih, “Dopant concentration profile determination for ceria based particles”, The 1st Cross Strait Symposium on Plasma Science, Technology and Application, Xiamen, China, May 19 (2012)

144. C. K. Lin, Y. J. Chou, C. J. Shih and S. J. Shih, “Microstructure evaluation of sol-gel derived mesoporous bioactive glass,” International Symposium 2012 of COM on Dental Technology, Oral Health Care and Biomedical Devices, Taipei, Taiwan, April 13-15 (2012).

145. S. J. Shih, J. P. Huang and Y. J. Chou, “Formation mechanism of ceria particles by spray pyrolysis,” 2nd International Conference on Key Engineering Materials, Singapore, February 26-28 (2012).

146. J. P. Huang, J. W. Huang and S. J. Shih, “Morphology study of ceria particles by spray pyrolysis,” The 2011 Annual Meeting of the Chinese Institute of Mining and Metallurgical Engineering, Taipei, Taiwan, November 25 (2011).

147. S. J. Shih and Y. Y. Wu, “Manipulation of nanoscale dopant distribution in particles for solid oxide fuel cell electrolytes,” Third International Symposium on Advanced Ceramics and Technology for Sustainable Energy Applications (ACTSEA 2011), Invited talk, Kenting, Taiwan, October 31-November 2 (2011)

148. S. J. Shih, J. P. Huang and Y. J. Chou, “Nanoscale control of composition in cerium and zirconium mixed oxide particles,” The 8th Cross Strait Symposium on Composites, Kaohsiung, Taiwan, September 24-27 (2011)

149. S. J. Shih, Y. Y. Wu, C. Y. Yu and C. Y. Chen, “Controlled morphological structure of ceria nanoparticles prepared by spray pyrolysis,” International Union of Materials Research Societies-12th International Conference in Asia (IUMRS-ICA 2011), Taipei, Taiwan, September 19-22 (2011)

150. S. J. Shih and Y. Y. Wu, “Manipulation of yttrium distribution in ceria-based particles,” The 9th International Meeting of Pacific Rim Ceramic Societies (PacRim9), Cairns, Australia, July 10-14 (2011)

151. S. J. Shih, “Manipulation of nanoscale dopant distribution in ceria particles for solid oxide fuel cell,” International Workshop on Advanced Materials, Invited talk, Taipei, Taiwan, June 31 (2011)

152. S. J. Shih and Y. Y. Wu, “Control of dopant distribution in yttrium doped ceria particles,” The 2011 Annual Meeting of the Chinese Ceramic Society, Taipei, Taiwan, May 28 (2011)

153. S. J. Shih, R. Shaghi-Moshtaghin, M. R. DeGuire, R. Goettler and Z. Liu and A. H. Heuer, “Mn valence in lanthanum strontium manganate determined by X-ray photoelectron spectroscopy and electron energy loss spectroscopy,” International Conference of Bi2O3-based Materials for Energy Application, Taipei, Taiwan, November 22-24 (2010)

154. S. J. Shih, R. Shaghi-Moshtaghin, M. R. DeGuire, R. Goettler and Z. Liu and A. H. Heuer, S. I. Lee and A. H. Heuer, “Mn valence in lanthanum strontium manganate determined by x-ray photoelectron spectroscopy and electron energy loss spectroscopy,” 11th Annual SECA Workshop, Pittsburgh, US, July 27-29 (2010)

155. S. J. Shih, R. Shaghi-Moshtaghin, M. R. DeGuire, R. Goettler and Z. Liu and A. H. Heuer, “Mn valence in lanthanum strontium manganate determined by x-ray photoelectron spectroscopy and electron energy loss spectroscopy,” Show Case, Cleveland, USA, April 15 (2010)

156. S. J. Shih, S. Lozano-Perez and D. J. H. Cockayne, “Investigation of grain boundaries for abnormal grain growth in polycrystalline SrTiO3,” International Workshop on Interfaces in Functional Materials, Macungie, USA, October 19-24 (2009)

157. S. J. Shih, K. J. Dudeck, and D. J. H. Cockayne, “Crystallographic and structural characterization of planar grain boundaries in polycrystalline SrTiO3,” Electron Microscopy and Analysis Group Conference, Sheffield, UK, September 8-11 (2009)

158. S. J. Shih, N. P. Young, and K. J. Dudeck, S. Y. Choi, M. Baeurer, M. J. Hoffmann and D. J. H. Cockayne, “Structural and orientation investigations of planar grain boundaries in polycrystalline,” Electroceramics XI, Manchester, UK, August 1-September 4 (2008)

159. L. F. Zagonel, N. Barrett, O. Renault, A. Bailly, M. Bauer, S. J. Shih, D. J. H. Cocknayne and M. Hoffmann, “Orientation dependent surface terminations of in situ annealed polycrystalline SrTiO3 determined by energy filtered XPEEM with NanoESCA”, 12th European Conference on Applications of Surface and Interface Analysis, Brussels, Flagey, September 9-14 (2007)

160. S. J. Shih, N. A. Benedek, M. W. Finnis, A. P. Sutton, M. Baeurer, M. Hoffmann and D. J. H. Cockayne, “Measurement of grain boundary orientations in polycrystalline materials”, Electron Microscopy and Analysis Group Conference, Glasgow, UK, September 3-7 (2007)

161. K. J. Dudeck, S. J. Shih, C.T. Koch, D. J. H. Cockayne, “High resolution TEM studies of grain boundaries in Si3N4 and SrTiO3”, Electron Microscopy and Analysis Group Conference, Glasgow, UK, September 3-7 (2007)

162. S. J. Shih, K. J. Dudeck, S. Y. Choi, M. Baeurer, M. Hoffmann and D. J. H. Cockayne, “High resolution EM studies of grain boundaries in polycrystalline SrTiO3”, European Materials Research Society Spring Meeting, Strasbourg, France, May 28-June 1 (2007)

163. M. B. Park, S. J. Shih, N. H. Cho and D. J. H. Cockayne, “EBSD studies of the grain size and grain orientation distribution of the SrTiO3”, Conference of the Korean Institute of Electrical and Electronic Materials Engineers, Mu-Ju Resort, Korea, November (2006)

164. S. J. Shih, M. B. Park and D. J.H. Cockayne, “The interpretation of electron back scatter diffraction patterns from ceramics”, 13th Conference and Workshop on Electron Backscatter Diffraction, Oxford, UK, April 3-4 (2006)

165. M. B. Park, S. J. Shih and D. J. H. Cockayne, “Analysis of the grain boundary properties of the SrTiO3 and BaTiO3 using EBSD”, 13th Conference and Workshop on Electron Backscatter Diffraction, Oxford, UK, April 3-4 (2006)

Book Chapters

01. S. J. Shih, G. Li., C. K. Huang and K. B. Borisenko, Influence of annealing on yttrium dopant distribution in ceria-based nanoparticles, in Yttrium: Compounds, Production and Applications, Editor: B. D. Volkerts, Nova Science Publishers, New York, USA, 209-219, 2011.

02. S. J. Shih, Nanometre-scaled structural studies of strontium titanate by electron microscopy and microanalysis, D.Phil Thesis, Oxford University, 2009.

Contributed Talk

01. “The recent trend and future prospect in materials technology”, Invited lecture, University of Inodnesia, Surabaya, Indonesia, 02/16/2011

02. “The recent trend and future prospect in materials technology”, Guest lecture, Institute Teknologi Sepuluh Nopember, Surabaya, Indonesia, 02/11/2011

03. “Observation of T-junction Grain Boundaries in SrTiO3”, M18 Meeting of Interfacial Materials- Computational and Experimental Multi-Scale Studies, Karlsruhe, Germany, January 11-13, 2007

04. “Orientation Studies of Grain Boundaries in Strontium Titanate”, M12 Meeting of Interfacial Materials- Computational and Experimental Multi-Scale Studies, London, UK, August 3-5, 2006