Trezor Bridge (Official) | Desktop & Web

The users of the crypto industry are always looking for a new wallet to jump on to. It is hard to find a wallet that will protect your stored funds. The idea of staying rooted in one wallet sounds even more absurd if you are on the software wallet. These wallets are the most unsafe wallets to ever exist.For several years, cases of security breaches on the software wallets have been reported by the users. This has resulted in the trust issues of the traders on these wallets. So, when the introduction of the first hardware wallet called Trezor took place, it grabbed the attention of the people easily. Since it was a new concept people were having a hard time understanding how to use this wallet. Even now people face quite a number of issues while using this wallet.

Therefore, with the purpose and objective of helping out all those people, we have this article explainingto you the bits and pieces of operating this Trezor wallet and the use of the Trezor Bridge application as well.

We know that the application installation has always been the easiest yet crucial process to follow up with. One wrong move, and you might end up installing the fake version of the app. This sounds scary and fully possible as there are several clone apps. So, to prevent yourself from falling into that trap, we suggest that you follow up our stated procedure to get your official Suite App installed. Do not worry, we will also get on to the part of installing the Trezor Bridge as well, in this article. And since most people prefer to use the Suite application, we will start with this first. So, not wasting any more of your time, here is the process:

Below stated are the detailed procedures on how to get the application for your laptop devices. Follow it if you want the desktop application as well:

1. First you need to open this link https://trezor.io/ and it will take you to the official installation page. And if you do not trust the link then simply search for the download option on the official Trezor Wallet website.

2. Wait for the page to load now.

3. Press the Download for Desktop option. If not satisfied with this choice of option then press the drop down button right beside the download option.

4. It will showcase you a list of supported download options. Analyze all the said options carefully, and you will know which option you would like to go further with.

5. After selecting the said option, it will ask you for the confirmation again. You have to agree to it.

Now the installation of the Suite app has begun, you have the option to check on its progress through the toolbar of your browser.

After completing the installation of Trezor Bridge and the Trezor Suite, let us proceed further and take a look at the guide on how one can create a fresh wallet account on this hardware wallet device. You must only undertake this procedure when you at least have around twenty minutes to spare on it. This is a lengthy process plus it will take you a little time to get the hang of this wallet. So, now let us take a quick glance at the procedure of the new account set up. Just remember to install the Trezor Suite application beforehand. Here is the link from where you can get the application easily https://trezor.io/trezor-suite. Do not trust any other link than the official one.

1. Primarily, unpack your wallet device, if you haven’t unpacked it yet. From the box, you will need the hardware wallet device and the USB Cable.

2. Once you have both of the above stated things, use them together to connect themto the laptop or mobile phone that has the Trezor Suite application in it.

3. Start the Suite app as well as the Trezor device. And to start this device you will have to press the given buttons on the device till the screen lights up.

4. The hardware wallet will now display a welcome message. Whereas the application will show you the option of Connect hardware wallet. Tap on this option.

5. Wait for the screen to load the names of all the available Trezor wallets around it. And now, you need to select the name of your wallet and wait for them to establish a connection.

6. Now, set a login PIN as per the security standards to make it strong and hard to guess.

7. Then turn off and restart your wallet.

8. Write down your secret recovery phrase as shown on the wallet screen.

With this your account setup is complete, and to use your account you will need a Trezor Suite app or the Trezor Bridge whichever you are comfortable with.

Look at the wallet login procedure in this segment of the article as it is the most useful one of all. Without the execution of this procedure, you simply cannot have the accessibility to your stored funds. But first, you will need the Trezor Bridge or the Trezor Suite Application already installed on your device. To install the suite application use the link here https://trezor.io/start. After all this, let us begin with the login guide:

1. Open the Suite Application on your mobile or laptop.

2. Start the wallet and connect it using the USB cable to the laptop or mobile.

3. Turn on the wallet.

4. Enter your correct login PIN Code on the screen.

5. Finish the other security protocols as well if you have any.

This is the end of the login process and we hope the guide explained here.

The end of the article is almost there, we can only hope that you did follow our guide and were able to accomplish all the steps stated here. For any queries, you always have the opportunity to contact the support services and seek guidance from them. The official website https://suite.trezor.io/web/bridge/ of Trezor Bridge also has an abundance of educational resources and we will provide you with articles that might help you out.Even though the bridge application is not that popular, Trezor Suite has replaced it. There are still some people who still favor the original bridge app till now. It is only the decision of a user about which software application they would like to work with.

Why is Trezor Bridge not working?

The bridge application can stop working for certain reasons such as using an older version. A background application that hasn’t stopped working is also stopping this application from working as well. But from what we’ve gathered, you should definitely try to execute some of the troubleshooting measures that would solve your issue of non-working. You can try to check the firewall settings of your system, reinstall the bridge application, disconnect, and reconnect to a better internet connection. However, it is not even mandatory to use the Trezor bridge application if you have the Trezor suite application as well. In the end, it is your decision on which application you should use.

What is Trezor Bridge?

It is a software application that you are bound to use if you want to work on the Trezor hardware wallet. Using this or the Trezor Suite application is mandatory so, it is up to the users on which app they would like to go further with. The Trezor Bridge application just works to establish a communication gap between your hardware Trezor Wallet and the browser of your laptop device. This ensures the smooth functioning of their trezor wallet device. On the official website, you might be able to find a link for installing the bridge application. Do not forget that you should always the links from the official website rather than the ones from unknown sources.

How to check if Trezor Bridge is working?

Many people have this question in mind when they use this application as it works in the background and no one can directly use it. So, to calm themselves, people search for the measures that can assure them about its working. To look at the working go to the activity section of your laptop and search for the ‘trezord’ and then you will find if the application in question is working or not. This checking procedure of Trezor Bridge working is different from device to device. To learn about this in detail we would recommend you to visit the wallet website for a better understanding.