Moorhouse Slasher
Introduction
The "Heavy Frame Moorehouse Gyrolin" was made in Australia by a company called "Moorhouse Machinery" and has now morphed into "ARCTEC ENGINEERING".
Arctec Engineering is a dynamic Australian engineering company with over 60 years experience in the design and manufacture of productive, heavy duty and reliable equipment for the Agricultural, Mining, Industrial and Transport sectors.
Manual
Operation
Adjust top link to level machine
Adjust top link to lift machine at the front for heavy cutting
Operate machine at 54p PTO RPM
Adjust Skids to cutting height
Caution
For security the nyloc nut used on the blade bolt should be renewed with each replacement
Maintenance
Check safety clutch for slipping after season storage & protect from weather to avoid seizer
Regularly check all nuts & bolts for security
Keep blades sharp to save power & ensure neater cutting jobs
Maintain level in gearbox with Castrol CL
Grease all points after 4 hours of work
Prior to use, grease PTO shaft so that it slides easily
Parts Manual - Download
Parts Diagram
Clutch Disc 140 x 83 x 3.5mm
ARCTEC ENGINEERING (Moorhouse Machinery)
8 Victa Way
Bomaderry
NSW 2541
Australia
Ph (02) 4421 3822
Fax (02) 4422 9091
Parts Manual Download below