Tasks/Assignments/Contributions

Tasks Completed

Jamia Millia Islamia

1. As in-charge Director-Centre for Innovation and Entrepreneurship (Oct-2021 to Nov-2022): Prepared and Proposed a  maiden "Comprehensive Technology Transfer Policy Document" for the University

2. Proposed Specifications and Plan for the "Incubation Centre and Co-working space" & "Idea Lab"  under the aegis of the  Centre of Innovation & Entrepreneurship. 

3. Up-scaled and Pitched a prototype on "COVIDE-19 test kit" developed by a group of Faculty members from life-sciences.

4. Shouldered responsibility of Faculty coordinator of JMI's Start-up and Innovation Policy (Oct-2021 to Nov-2022): Developed and Proposed the Innovation and Start-up Policy of JMI.  

5. Over-seen the Annual Convocation of JMI 2010 in the capacity of Offg Chief Proctor-JMI. The Convocation was graced by His Holiness Dalai Lama as guest of honour and the then Union Minister HRD as Chief Guest. 

OUTREACH

1. ON ADVISORY BOARD: Startup-eVidyalay

2. Owning a VIBRANT professional Group "Remanufacturing, reverse logistics and reuse" with majority membership with Global presence.

3. Mentor to an Innovative Prototype development on MSME's Project entitled "Saffron Processing Machine"

Tasks Completed

Grant Documents

1. Sole resource person in the preparation of necessary proposals for UGC's approved Grant (Worth Rs 33 Lakh) to the department of mechanical engineering, JMI under SAP scheme.

2. Sole resource person in the preparation of necessary proposals for DST Grant (two separate grant documents ONE Worth Rs 5.00 Cr & the SECOND Worth Rs 10.00 Cr) submitted by the department of mechanical engineering, JMI under FIST scheme. The FIRST Proposal has been awarded a grant of worth Rs. 1.4 Cr.

 Development of Institute Profile

Prepared the FACULTY PROFILE   (F/O Engg & Tech, JMI - RANKED 12th)   for  "THE WEEK SURVEY/Outlook" of top Technical Institutions in INDIA  -  2011

• 1.  Sole resource person in preparation of a comprehensive Institute profile and evaluation document for a national level survey of BEST TECHNICAL INSTITUTION conducted by several independent agencies including OUT-LOOK. The F/O Engineering & Technology, JMI was ranked 12th in India.

Preparation of DPR/Programme documents for New Course(s)/New Department(s) 

1. Conception, Design and Development of Definitive Programme Document (DPD) of an Imminent B. Tech Programme in Petroleum Engineering. The DPD conforms to the Norms of AICTE and takes care of requirements of Oil & Gas and Petroleum Industry.

2. Conception, Design and Development of Definitive Programme Document (DPD) of a proposed B. Tech. Level Programme in Aeronautical Engineering. The proposed programme would be established conforming to the Norms of DGCA, AICTE and other statuary government bodies.

Contributions

• 1. Instrumental in the Approval Process of M. Tech Mechanical Engineering Programme at Department of Mechanical Engineering, JMI.

  2. Developed Course material of Workshop Practice and Power Plant Schematics for Diploma in Power Generation Engineering (DPG) of ASCDOL, JMI

  3. Architect of Jamia Millia Islamia's "Startup and Innovation Policy".

Portfolios/Assignments

• 1. Held the position: In charge of Centre for Innovation and Entrepreneurship, Jamia Millia Islamia, New Delhi

  2. Faculty Coordinator "Enactus - JMI".  

  3. Coordinator of Faculty Magazine "Tech Times"

  4. Deputy Proctor, JMI.

 Career Profile at AICTE, New Delhi, India

  Portfolios/Assignments

• 1. Officer in-charge responsible for Establishment/Approval/Extension of Approval/Variation of Intake of All degree level Technical Institutions in the Southern Region of AICTE. 

  2. Contributed to the policy evolution on the matters related to the Approval Process of degree level technical Institutions.

Career Profile at Caledonial College of Engineering, Muscat, OMAN

  Portfolios/Assignments

1. Conception, Design and Development of Definitive Programme Document (DPD) of (now well established and ongoing) B. Tech Programme in (i) Oil & Gas Engineering and (ii) Mechatronics Engineering. The DPD was prepared conforming to the Norms of Glasgow Caledonian University (GCU), U.K., and was duly approved by the GCU Senate.

   1.  Key Resource person in the Course Content and training Resource material development for a One Year Tailor Designed "Foreman Training Programme" for local Oil & Gas Industry professionals.

   2. Developed the Engineering Workshop of the Institute from scratch. My responsibilities included planning of requirements of machine-tools, tools & equipment, specification preparation and to foresee procurement, import and installation of the machines.

   3. Developed the Computer Integrated Manufacturing (CIMS) Lab of the College from Scratch. It is a high end sophisticated lab developed in a phased manner in three phases. My responsibilities included planning of requirements of machine-tools, tools & equipment, specification preparation and to foresee international bidding, procurement, import and installation of the machines.